Do you do basement drywall in Evanston?

Yes — Evanston is part of our regular service area. We cover Evanston, Nolan Hill, Kincora and Sage Hill and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.

What board do you use on exterior basement walls in Evanston?

Moisture-resistant board (green board or purple board) on all walls against the exterior foundation and around plumbing and laundry. Standard 1/2” drywall for interior partition walls away from moisture. For legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each surface at the on-site quote before we start.

Do you do legal suite basement drywall in Evanston?

Yes, and we know the spec. A legal secondary suite in Evanston requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC-rated soundproof board on the party walls. Moisture-resistant in wet areas. We board to that spec so the suite passes inspection.

How long does basement drywall take in a Evanston home?

A typical open basement takes two to four days to board and another two to three days to tape, mud and finish — mud needs drying time between coats. A suite conversion with more partitions and spec-board requirements takes longer. We give you a realistic timeline at the on-site quote, not an optimistic one.

Can you finish a basement that is partially started in Evanston?

Yes, and we do it regularly. We assess what is already there — whether the board type is correct for each surface, whether the framing is square enough to board, whether anything needs to come down — and give you a straight price to finish the Evanston basement properly. We do not just board over problems.

Basement Drywall Evanston Calgary

Basement drywall in Evanston boarded, taped and finished right

We finish basements in Evanston homes — boarding the framing, specifying the right board type for each surface, taping and mudding every joint and corner to Level 4, and leaving the space paint-ready. Evanston homes built in the 2000s and 2010s came with framed, unfinished basements that homeowners are now finishing for living space or secondary suites. We cover Evanston, Nolan Hill, Kincora and Sage Hill and the surrounding area, 7 days a week.

Basement boarding and taping in Evanston — Level 4 as standard
Moisture-resistant board on exterior walls and around plumbing
Soundproof board between legal suite and main floor
Fire-rated board where code requires it
Bulkheads, soffits, mechanical chases and ceiling work
Legal suite and secondary suite conversions in Evanston
Sanded flat and paint-ready before we leave

What affects the cost of basement drywall in Evanston in Calgary?

Linear footage, board type and basement layout in Evanston homes

The cost of basement drywall in Evanston comes down to five things: total linear footage of framed wall, ceiling square footage and height, the number of bulkheads, soffits and mechanical chases, board type (standard, moisture-resistant, soundproof and fire-rated are different costs), and how much mechanical, plumbing and structural work the walls need to accommodate. We measure on site and give you a fixed price before we start.

Legal suite requirements and basement drywall spec in Evanston

If the basement includes a legal secondary suite, the board spec changes significantly. The ceiling between the suite and the floor above requires 5/8” Type X fire-rated board. Party walls between the suite and the main living space need STC-rated soundproof board. Moisture-resistant board goes on all exterior walls and in wet areas. We spec this before we board — not after the inspection flags it.

Our Evanston basement drywall process in Calgary, step by step

Board selection and surface mapping before we pull the first sheet

Basement drywall in Evanston is not one-product-fits-all. Exterior foundation walls need moisture-resistant board. Any wall adjacent to a bathroom or laundry needs moisture-resistant. Legal suite ceilings need fire-rated. Party walls need soundproof. We walk the basement and map every surface before we spec the materials — so what we order is what the job actually needs, and there are no surprises at inspection.

Boarding, taping and mudding to Level 4 throughout

Once the right board is on the right surfaces, every seam, inside corner, outside corner and fastener head gets taped and mudded to Level 4 — three coats, proper drying time between each, sanded flat. Basement ceilings often have bulkheads for HVAC, beam wraps and posts to work around. We tape all of that to the same Level 4 standard as the walls. When we leave the Evanston basement, it looks consistent from floor to ceiling.

Basement drywall board types used in Evanston homes in Calgary

Standard drywall — interior basement walls in Evanston

Standard 1/2” drywall is correct for interior partition walls inside a Evanston basement that have no moisture exposure — the walls separating a home office from a bedroom, partition walls in a recreation room or home theatre. It is lighter to handle and finishes the same as the rest of the house. Most interior basement partition walls in Evanston homes use standard board.

Moisture-resistant, soundproof and fire-rated — where the spec matters in Evanston

Exterior foundation walls in Evanston homes need moisture-resistant board even with a vapour barrier. Bathrooms and laundry rooms need moisture-resistant on all walls. Legal suite ceilings require 5/8” Type X fire-rated board. Party walls between a suite and the main living space benefit significantly from STC soundproof board — the difference is audible. We map each surface at the on-site quote and specify the right product before we start.

Basement drywall work we do in Evanston in Calgary

Finishing the unfinished basement that came with the Evanston home

The most common basement drywall call in Evanston is the homeowner who has been in the house for a few years and is finally ready to finish the basement the builder left as framed-and-open. We measure the space, assess the framing, spec the right board for each surface and board, tape and finish the entire basement to Level 4. Evanston homeowners who wanted a home office, guest bedroom or recreation room get a space that is paint-ready and ready for flooring.

Secondary suite partitions and bedroom additions in Evanston basements

A number of Evanston homeowners are converting their unfinished basements to secondary suites or adding a legal bedroom to an existing basement layout. We board the partitions, tape all joints and corners to Level 4, and make sure the board spec is correct for each wall — moisture-resistant where required, fire-rated on the suite ceiling, soundproof on party walls.

Why Evanston homeowners trust Emplastrum for basement drywall in Calgary

We spec the board before we touch the framing in Evanston

Most drywall crews board every surface the same way and leave the homeowner to deal with inspection issues after. We map every Evanston basement before we price it and specify the right board in writing — moisture-resistant where it belongs, fire-rated where code requires, soundproof where the suite spec calls for it. You will not be calling us back before a permit inspection.

Fixed price, same-day reply, all four Calgary quadrants, Airdrie and Cochrane

We cover all four Calgary quadrants, Airdrie and Cochrane, 7 days a week — Evanston, Nolan Hill, Kincora, Sage Hill, Citadel and Carrington and every community in between. Free on-site quotes, fixed prices — you know the number before we start and it does not change when we get on site.

How it works

Simple, clean, on schedule

Free quote

We come out, take a look, and give you a real price. No guessing after.

Book a day

We pick a date that works for you and show up when we say.

The work

We keep the dust down and tidy up before we head out.

Walk it with you

We don't pack up till you've looked it over and you're happy.

FAQ — Basement Drywall Evanston

Basement Drywall Evanston: your questions answered

Do you do basement drywall in Evanston in Calgary?›: Yes — Evanston is part of our regular service area. We cover Evanston, Nolan Hill, Kincora and Sage Hill and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.
What board do you use on exterior basement walls in Evanston?›: Moisture-resistant board (green board or purple board) on all walls against the exterior foundation and around plumbing and laundry. Standard 1/2” drywall for interior partition walls away from moisture. For legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each surface at the on-site quote before we start.
Do you do legal suite basement drywall in Evanston in Calgary?›: Yes, and we know the spec. A legal secondary suite in Evanston requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC-rated soundproof board on the party walls. Moisture-resistant in wet areas. We board to that spec so the suite passes inspection.
How long does basement drywall take in a Evanston home in Calgary?›: A typical open basement takes two to four days to board and another two to three days to tape, mud and finish — mud needs drying time between coats. A suite conversion with more partitions and spec-board requirements takes longer. We give you a realistic timeline at the on-site quote, not an optimistic one.
Can you finish a basement that is partially started in Evanston?›: Yes, and we do it regularly. We assess what is already there — whether the board type is correct for each surface, whether the framing is square enough to board, whether anything needs to come down — and give you a straight price to finish the Evanston basement properly. We do not just board over problems.

Basement Drywall Evanston

Basement drywall in Evanston boarded, taped and finished right