Do you do poly-B re-pipe drywall repair across all of Calgary?

Yes — we cover all four Calgary quadrants, Airdrie and Cochrane, 7 days a week. Free on-site quotes, fixed prices, same-day reply. We work in all the established NW and NE Calgary communities with high poly-B density, and in newer communities where the calls are smaller-scope plumbing repair patches.

Do I need to wait for plumbing inspections before you repair the drywall?

Yes. We do not close any wall or ceiling cut-out until the plumbing re-pipe is done and inspections have passed. Closing drywall before inspection forces the inspector to cut back in — you pay for the repair twice. We coordinate with your plumber and schedule to follow inspections directly.

How many cut-outs does a full poly-B re-pipe typically leave in a Calgary home?

It depends on the home layout and how the plumber ran the new lines. A one-storey Calgary bungalow from the 1970s typically has 15 to 25 wall and ceiling cut-outs. A two-storey from the same era can have 25 to 40. We assess the full scope on-site and price it accordingly — one fixed price for every opening.

Can you match the wall and ceiling texture after patching?

Yes. Texture matching is part of every poly-B re-pipe drywall job we do in Calgary. Whether the home has knockdown ceilings, smooth walls or a heavier stipple pattern, we match it so the patches are invisible under paint. This is not an add-on — it is standard.

Can you coordinate timing with my plumber?

Yes. If you let us know before the re-pipe starts, we can communicate directly with the plumber to align our schedule with the inspection timeline. This keeps the walls closed as quickly as possible after the plumbing work is done.

Poly-B Drywall Repair Calgary | Emplastrum Drywall

Poly-B plumbing re-pipe drywall repair — Calgary, Airdrie and Cochrane

Poly-B plumbing was installed in Calgary homes from the late 1970s through the mid-1990s. When a plumber does a full re-pipe or repairs a failed fitting, the job leaves cut-outs in walls and ceilings throughout the home. We come in after the plumber is done and inspections have passed, close every opening, tape the joints to Level 4 and texture match — so the only sign of the re-pipe is better plumbing. We cover all four Calgary quadrants, Airdrie and Cochrane, 7 days a week.

Re-pipe drywall — all cut-outs closed, one scope, one invoice
Single fitting failure patches — targeted, paint-ready
Tape to Level 4 — bedded tape, multiple coats, sanded flat
Texture matched — knockdown, smooth, or existing pattern
Coordinated with your plumber — we slot in after inspections pass
Dust contained, work room by room, clean before we leave
Free on-site quotes, fixed prices, same-day reply

What affects the cost of poly-B re-pipe drywall repair in Calgary?

Patch count, ceiling vs. wall, and texture matching

The main cost drivers for poly-B re-pipe drywall repair in Calgary are how many cut-outs the plumber left, whether the openings are in walls or ceilings (ceilings take more setup), and how many different textures need to be matched throughout the home. A full re-pipe in a 1970s Calgary bungalow — one storey, slab-on-grade or crawl space below — can leave 15 to 25 wall and ceiling patches. A two-storey from the same era can leave 25 to 40. We assess the full scope on-site and give you a fixed price that covers every opening.

Coordinating around the plumber in Calgary

Re-pipe jobs go smoothest when the drywall work follows the plumbing directly. We schedule to come in immediately after the plumber is done and inspections have passed — so your Calgary home is not sitting with open walls for weeks. If you are planning a re-pipe, call us before the plumbing starts and we can coordinate the timing from the beginning.

Our Calgary poly-B re-pipe drywall repair process

Waiting for inspections before we close any opening in Calgary homes

We do not close a single wall or ceiling cut-out until the plumbing re-pipe is done and inspections have passed. Closing drywall over plumbing that has not yet been inspected forces the inspector to cut it back open — and the homeowner pays for the repair twice. We coordinate with the plumber and schedule to follow inspections, not to race them.

Every opening closed, taped to Level 4, texture matched in Calgary homes

After inspections, we fit new board into each cut-out, tape the joints to Level 4 — properly bedded tape, multiple coats, sanded flat. This is not a fast-patch job. The joints need to be right or they will show under paint. We texture match every repaired area to the surrounding wall or ceiling — knockdown, smooth or any pattern already in the room — and leave paint-ready. You should not be able to tell where the plumber cut in.

Which Calgary communities have the most poly-B plumbing?

NW Calgary — the highest poly-B density neighbourhoods

The communities with the highest poly-B plumbing density in Calgary are almost all in the northwest: Silver Springs, Ranchlands, Dalhousie, Hawkwood, Scenic Acres, Edgemont and Crowfoot. These communities were built through the 1970s and into the early 1990s, and poly-B was the standard supply plumbing for the entire era. Full re-pipe drywall work in NW Calgary is one of our most consistent services. If you are in one of these communities and have not had the plumbing addressed yet, a fitting failure is a matter of when, not if.

NE, SW and SE Calgary — established communities with significant poly-B exposure

NE Calgary communities including Rundle, Pineridge, Temple, Falconridge and Marlborough have similar poly-B density to established NW Calgary. SW Calgary established communities — Lakeview, Glendale, Haysboro, Glamorgan — also have poly-B from the same era. Established SE Calgary — Forest Lawn, Riverbend, Douglasdale — rounds out the poly-B exposure across the city. Newer communities built after the mid-1990s — in all quadrants — have copper or PEX and see only small-scope plumbing repair patches.

Poly-B drywall repair work we do across Calgary

Full re-pipe drywall work in NW and NE Calgary’s established communities

Silver Springs, Ranchlands, Dalhousie, Hawkwood, Scenic Acres, Edgemont, Crowfoot, Rundle, Pineridge, Temple, Falconridge — these are the Calgary communities where we do consistent full re-pipe drywall work. A typical job in one of these homes involves 15 to 40 wall and ceiling cut-outs across multiple rooms, closets, utility spaces and occasionally crawl spaces. We close every opening, tape to Level 4 and texture match throughout. We work room by room so the home stays livable, and we clean up each room completely before we move on.

Single fitting failure patches and newer-community repair work

Not every poly-B call is a full re-pipe. A single fitting failure at a bathroom shutoff or hot water tank connection in a home that has not yet been re-piped leaves a targeted cut-out. We patch it, tape to Level 4 and texture match — same standard as a full re-pipe job, just a single opening. In newer Calgary communities — Evanston, Kincora, Nolan Hill, Legacy, Mahogany, Auburn Bay — the calls are small-scope plumbing repair patches where the primary requirement is a clean Level 4 finish and a precise texture match.

Why Calgary homeowners choose Emplastrum for poly-B re-pipe drywall repair

We coordinate with your plumber and follow inspections — we do not create rework

The fastest way to create rework on a re-pipe job is to start closing walls before inspections pass. We coordinate with the plumber, wait for inspections, then move in immediately after — so the timeline is tight and your home is not sitting open. Every opening gets the same Level 4 finish regardless of size, because a cut-out that reads as a patch under paint is not a finished job.

Fixed price for the full scope, texture match included, same-day reply

We cover all four Calgary quadrants, Airdrie and Cochrane, 7 days a week. We come on-site, count every opening, note every texture in the home and give you a fixed price that covers the complete scope. No line-item surprises. Texture matching is part of the job — it is not an add-on. Free quotes, same-day reply.

How it works

Simple, clean, on schedule

Free quote

We come out, take a look, and give you a real price. No guessing after.

Book a day

We pick a date that works for you and show up when we say.

The work

We keep the dust down and tidy up before we head out.

Walk it with you

We don't pack up till you've looked it over and you're happy.

FAQ — Poly-B Drywall Repair Calgary

Poly-B Drywall Repair Calgary: your questions answered

Do you do poly-B re-pipe drywall repair across all of Calgary?›: Yes — we cover all four Calgary quadrants, Airdrie and Cochrane, 7 days a week. Free on-site quotes, fixed prices, same-day reply. We work in all the established NW and NE Calgary communities with high poly-B density, and in newer communities where the calls are smaller-scope plumbing repair patches.
Do I need to wait for plumbing inspections before you repair the drywall?›: Yes. We do not close any wall or ceiling cut-out until the plumbing re-pipe is done and inspections have passed. Closing drywall before inspection forces the inspector to cut back in — you pay for the repair twice. We coordinate with your plumber and schedule to follow inspections directly.
How many cut-outs does a full poly-B re-pipe typically leave in a Calgary home?›: It depends on the home layout and how the plumber ran the new lines. A one-storey Calgary bungalow from the 1970s typically has 15 to 25 wall and ceiling cut-outs. A two-storey from the same era can have 25 to 40. We assess the full scope on-site and price it accordingly — one fixed price for every opening.
Can you match the wall and ceiling texture after patching?›: Yes. Texture matching is part of every poly-B re-pipe drywall job we do in Calgary. Whether the home has knockdown ceilings, smooth walls or a heavier stipple pattern, we match it so the patches are invisible under paint. This is not an add-on — it is standard.
Can you coordinate timing with my plumber?›: Yes. If you let us know before the re-pipe starts, we can communicate directly with the plumber to align our schedule with the inspection timeline. This keeps the walls closed as quickly as possible after the plumbing work is done.

Drywall contractor for Poly-B re-pipe patching in Calgary

A Poly-B re-pipe leaves your walls open in every room. The drywall contractor you hire needs to patch dozens of cuts invisibly — matching texture, taping flat and finishing to the same level as the rest of the wall. Emplastrum is the drywall contractor Calgary plumbers recommend for Poly-B patch work across NW, NE, SW and SE Calgary, Airdrie and Cochrane. Fixed price per opening, free on-site estimate.

See everything your drywall contractor in Calgary covers →

Poly-B Drywall Repair Calgary

Poly-B plumbing re-pipe drywall repair — Calgary, Airdrie and Cochrane