Do you do drywall for whole new homes?

Yes — we board, tape, mud and finish complete new homes, plus additions, infills and suites, to a flat Level 4 or premium Level 5 finish across Calgary, Airdrie and Cochrane.

Do you work with builders and general contractors?

Yes. We work with builders, GCs and owner-builders, coordinate our start around the build sequence, and hit our schedule so the trades behind us are not delayed.

What board do you use where in a new home?

Standard board on most interior walls, moisture-resistant on exterior foundation walls, bathrooms and laundry, 5/8" Type X fire-rated on garage and suite separations, and soundproof board on suite party walls. We map every surface before boarding.

Can you finish to Level 5 on a new build?

Yes. Level 4 is standard throughout; we add a Level 5 skim coat on feature walls, big-window rooms and flat ceilings where it is specified or where lighting will show imperfections.

Will you hit our construction schedule?

Yes — we commit to a window and hit it, working in the correct sequence between insulation and the finishing trades so painters, trim and flooring are not held up.

Do you drywall new legal and secondary suites?

Yes — including the fire-rated separations and sound-separation assemblies a suite requires. This pairs with our legal suite drywall service.

Do you cover all of Calgary for new construction drywall?

Yes — all four Calgary quadrants, Airdrie, Cochrane and surrounding communities, 7 days a week, excluding downtown high-rise towers.

New Construction Drywall Calgary

New construction drywall from board to flawless finish

New construction drywall sets the standard for the whole home — every wall and ceiling a homeowner sees for the next twenty years starts here. We board, tape, mud and finish new builds, additions, infills and suites the way a finishing specialist wants it done: the right board on every surface, ceilings first, correct screw pattern, all seams on framing, and a flat Level 4 or premium Level 5 finish ready for paint. We work alongside builders, general contractors and owner-builders across all four Calgary quadrants, Airdrie and Cochrane, 7 days a week, and we hit schedule so the trades behind us are not held up.

Full new-home drywall — boarding, taping, mudding, finishing
Additions, infills and second-storey builds
New legal and secondary suites
Right board on every surface — standard, moisture-resistant, fire-rated, soundproof
Level 4 finish standard, Level 5 where specified
Bulkheads, soffits, archways and vaulted ceilings
On-schedule so following trades are not delayed
Dust-controlled work and a clean site every day

What affects the cost of new construction drywall in Calgary?

Square footage, ceilings and board spec

New construction drywall cost in Calgary comes down to total wall and ceiling square footage, ceiling complexity (flat vs vaulted, cathedral, bulkheads and soffits), the board spec across the home (standard, moisture-resistant, fire-rated and soundproof are priced differently), and the finish level — Level 4 throughout, or Level 5 on feature surfaces. We measure from plans or on site and give a fixed price before we start.

Whole-home vs addition vs suite

A full new home, a single addition, and a secondary suite are scoped differently. An addition has to tie into existing finishes invisibly; a suite has fire-rated and sound-separation requirements. We price the actual scope, not a generic per-foot number.

Schedule and coordination

New construction runs on sequence. We coordinate our start around framing, rough-ins and insulation, and we hit our window so the painters, trim and flooring crews behind us are not delayed — which protects your overall build cost.

Our Calgary new construction drywall process, step by step

Board spec mapped to every surface

Before a sheet goes up we map the board to each surface: moisture-resistant on exterior foundation walls, bathrooms and laundry; 5/8" Type X fire-rated on garage separations and suite ceilings; soundproof on suite party walls; standard board everywhere else. Right product, right place, no surprises at inspection.

Ceilings first, correct screw pattern

Ceiling board goes up before walls so the wall board carries it, with the correct screw pattern — every 12" in the field, 8" at the perimeter — and all seams on framing. Good boarding is what makes the finish possible; every finishing problem traces to a boarding shortcut underneath it.

Tape, finish and check under light

We tape, apply the fill and finish coats with proper dry time, sand smooth and check every surface under raking light to the Level 4 or 5 spec. The home leaves us flat, clean and paint-ready, with no rework for the trades that follow.

New construction board types for Calgary homes

Standard, moisture-resistant and the wet areas

Most interior walls and ceilings in a new Calgary home use standard 1/2" board. Exterior foundation walls, bathrooms and laundry rooms get moisture-resistant board to handle Calgary's freeze-thaw and humidity. Getting this right at new-build stage avoids callbacks years later.

Fire-rated and soundproof where the build requires

Attached garage separations and suite ceilings need 5/8" Type X fire-rated board; suite party walls benefit from soundproof assemblies. We specify and install the right product on every surface so the home meets code and performs.

Level 4 vs Level 5

Level 4 is the standard for most new-home walls. Level 5 — a full skim coat — is worth it on feature walls, big-window great rooms and flat ceilings. See our Level 5 finish page.

New construction drywall work we do across Calgary

New homes and big-volume communities

The bulk of new construction drywall in Calgary is in the high-growth communities — Mahogany, Walden, Legacy, Auburn Bay, Cranston, Seton in the southeast; Evanston, Nolan Hill, Carrington, Sage Hill and Kincora in the north. We board and finish full homes to builder and owner specifications across all of them.

Infills, additions and suites

In the established inner ring — Bowness, Silver Springs, Killarney, and the infill belt — the work is new infill homes, additions and second-storey builds that must tie into existing finishes, plus new secondary suites. This pairs with legal suite drywall and drywall installation.

Working with builders, GCs and owner-builders

We hit schedule and protect the sequence

On a new build, drywall sits between insulation and the finishing trades, and a slow drywall crew delays everyone behind it. We commit to a window and hit it, board and finish in the right sequence, and keep the site clean so the next trade can move in on time.

One accountable finishing standard

Whether you are a builder running multiple homes, a GC on a custom build, or an owner-builder doing it once, you get the same finishing standard and a single point of accountability for the drywall scope — boarded right, finished flat, ready for paint, no rework.

Why Calgary homeowners and builders trust Emplastrum for new construction

Finishing specialists who board it right

We are a mudding and taping specialist first, so we board new construction the way it needs to be boarded to finish flawlessly — and then we finish it flawlessly. The result is straight walls, flat ceilings and a finish that still looks right under raking light years later.

Fixed price, same-day reply, all Calgary quadrants

We cover all four Calgary quadrants, Airdrie and Cochrane, 7 days a week. Free quotes from plans or on site, fixed prices, and a schedule you can build around.

How it works

Simple, clean, on schedule

Free quote

We come out, take a look, and give you a real price. No guessing after.

Book a day

We pick a date that works for you and show up when we say.

The work

We keep the dust down and tidy up before we head out.

Walk it with you

We don't pack up till you've looked it over and you're happy.

FAQ — New Construction Drywall Calgary