Do you do drywall installation in Legacy?

Yes — Legacy is part of our regular service area. We cover Legacy, Walden, Cranston and Mahogany and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.

What board do you use for exterior basement walls in Legacy?

Moisture-resistant board on all exterior foundation walls and around plumbing and laundry. Standard 1/2” board for interior walls away from moisture. For legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each surface at the on-site quote.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Legacy. The wall board butts under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — more likely to crack over time. We do not start walls until the ceiling is done.

How long does drywall installation take in a Legacy home?

A standard basement in a Legacy home typically takes one to two days to board. A full new-build or a larger renovation takes longer. We give you a realistic timeline at the on-site quote. The taping crew can usually start the day after boarding is complete.

Do you board for legal suites in Legacy?

Yes, and we know the spec. A legal secondary suite in Legacy requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. We board to that spec so the installation passes inspection.

Drywall Installation Legacy Calgary

Drywall installation in Legacy — hung straight, screwed off right

Good drywall installation is what makes a good finish possible. We hang board level, use the correct screw pattern, land all seams on framing and cut around mechanical and corners cleanly. Legacy is one of SE Calgary’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Legacy, Walden, Cranston and Mahogany and the surrounding area, 7 days a week.

Drywall boarding in Legacy — new builds and renovations
Basement development boarding — ceiling first, then walls
Moisture-resistant board on exterior walls and wet areas
Fire-rated and soundproof board for legal suite separations
Correct screw pattern and all seams on framing
Bulkheads, soffits, archways and ceiling work
Ready for taping when we leave — no rework

What affects the cost of drywall installation in Legacy in Calgary?

Square footage, board type and ceiling complexity in Legacy

The cost of drywall installation in Legacy comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaulted, bulkheads and soffits add time), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec for Legacy homes — right product on every surface

Not every surface in a Legacy home needs the same board. Exterior foundation walls need moisture-resistant. Bathrooms and laundry need moisture-resistant on all walls. Legal suite ceilings need 5/8” Type X fire-rated. Party walls between a suite and living space benefit from STC soundproof board. Standard 1/2” board is correct for interior walls away from moisture. We specify the right product for each surface at the on-site quote — not after the inspector flags it.

Our drywall installation process in Legacy in Calgary, step by step

Ceiling board first — always — in Legacy homes

Every boarding job in Legacy starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps support it. Skipping that sequence means the ceiling joints carry their own weight unsupported and are more likely to crack. We do not start walls until the ceiling is done. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Legacy

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing, not between studs. Inside and outside corners are clean and square. Board does not run past window and door frames. When the boarding is done in a Legacy home, every surface is at the right plane and the taping crew can go straight to work.

Drywall board types used in Legacy homes

Standard 1/2” drywall — the right choice for most Legacy walls

Standard 1/2” drywall is correct for interior walls and ceilings in Legacy homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Legacy walls and ceilings should be. Most interior walls and ceilings in Legacy homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Legacy

Exterior basement walls in Legacy homes need moisture-resistant board. Bathrooms and laundry need moisture-resistant on all walls. Legal suite ceilings require 5/8” Type X fire-rated board. Party walls between a suite and the main living space get STC soundproof board. We specify the right product for each surface at the on-site quote so there are no surprises at inspection.

Drywall installation work we do in Legacy in Calgary

New development boarding in Legacy — basement and flex rooms

Legacy homeowners finishing new development basements call us to do the boarding before the taping crew. We hang ceiling board first, wall board second, with moisture-resistant on exterior foundation walls and any wall adjacent to plumbing rough-in. We cut bulkheads cleanly, use the correct screw pattern throughout and leave the space ready for taping. No re-work — the taper can start the day after we finish.

Legal suite boarding to spec in Legacy

With strong rental demand in the Legacy area, secondary suite boarding calls are among the most consistent installation jobs we do. We board to the Calgary spec — 5/8” Type X fire-rated on the suite ceiling, STC soundproof on party walls, moisture-resistant in wet areas — and leave an inspection-ready installation. Fixed price, specified at the on-site quote.

Why Legacy homeowners trust Emplastrum for drywall installation in Calgary

Boarding done right means the finish can be done right in Legacy

The quality of a Level 4 wall finish starts with the boarding behind it. Board that is not level, has seams mid-field or has screws too far apart creates problems the taping crew has to fight. We board every Legacy job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Calgary quadrants, Airdrie and Cochrane

We cover all four Calgary quadrants, Airdrie and Cochrane, 7 days a week — Legacy, Walden, Cranston, Mahogany, Chaparral and Shawnessy and every community in between. Free on-site quotes, fixed prices — you know the number before we start and it does not change when we arrive.

How it works

Simple, clean, on schedule

Free quote

We come out, take a look, and give you a real price. No guessing after.

Book a day

We pick a date that works for you and show up when we say.

The work

We keep the dust down and tidy up before we head out.

Walk it with you

We don't pack up till you've looked it over and you're happy.

FAQ — Drywall Installation Legacy

Drywall Installation Legacy: your questions answered

Do you do drywall installation in Legacy in Calgary?›: Yes — Legacy is part of our regular service area. We cover Legacy, Walden, Cranston and Mahogany and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.
What board do you use for exterior basement walls in Legacy?›: Moisture-resistant board on all exterior foundation walls and around plumbing and laundry. Standard 1/2” board for interior walls away from moisture. For legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each surface at the on-site quote.
Do you hang the ceiling board first?›: Yes, always. Ceiling board goes up before wall board on every job in Legacy. The wall board butts under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — more likely to crack over time. We do not start walls until the ceiling is done.
How long does drywall installation take in a Legacy home in Calgary?›: A standard basement in a Legacy home typically takes one to two days to board. A full new-build or a larger renovation takes longer. We give you a realistic timeline at the on-site quote. The taping crew can usually start the day after boarding is complete.
Do you board for legal suites in Legacy?›: Yes, and we know the spec. A legal secondary suite in Legacy requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. We board to that spec so the installation passes inspection.

Get a free quote — Drywall Installation Legacy

Tell us about the job and we’ll reply the same day, 7 days a week. Prefer to call? (403) 829-8702.

or email emplastrumcalgary@gmail.com

Drywall Installation Legacy

Drywall installation in Legacy — hung straight, screwed off right