Drywall installation in Sierra Springs, Calgary — boarding, hanging and finishing for new builds, basement development, renovation additions and suite boarding. Free on-site quotes, 7 days a week.
Free on-site quotes7 days a weekNW Calgary · Cochrane · AirdrieLocally owned & operated
Drywall installation in Sierra Springs, hung straight, screwed off right
Drywall installation in Sierra Springs, hung straight, screwed off right
Good drywall installation is what makes a good finish possible — board hung level, the correct screw pattern, seams landed on framing and clean cuts around mechanical and corners. In Sierra Springs we board new builds, additions, basements and suites to that standard. Sierra Springs is a Airdrie community with a mix of older homes and newer builds, so the installation work here is usually everything from fresh-build settling cracks to aging texture. We cover Sierra Springs and all of Airdrie, 7 days a week.
Drywall boarding in Sierra Springs — new builds and renovations
Basement development boarding — ceiling first, then walls
Moisture-resistant board on exterior walls and wet areas
Fire-rated and soundproof board for legal suite separations
Correct screw pattern and all seams on framing
Bulkheads, soffits, archways and ceiling work
Ready for taping when we leave — no rework
Watch
Drywall Installation Sierra Springs
More clips — use the arrows (or swipe) and tap any one to watch it in the player above.
What affects the cost of drywall installation in Sierra Springs?
Square footage, board type and ceiling complexity
The cost of drywall installation in Sierra Springs comes down to the total square footage, the board type (standard, moisture-resistant, fire-rated and soundproof are different costs), and whether the job is new construction or a renovation around existing trades. We measure on site and give a fixed price before we start.
The right board on every Sierra Springs surface
We specify moisture-resistant on exterior and wet-area walls, fire-rated on suite ceilings and soundproof on party walls where the job calls for it — not after an inspector flags it.
Our Sierra Springs drywall installation process, step by step
Ceiling board first, always
Every boarding job in Sierra Springs starts with the ceiling — ceiling board goes up before the walls because the wall board helps support it. Skipping that sequence leaves ceiling joints more likely to crack later.
Wall boarding, screw pattern and joint placement
Wall board goes up with the correct screw pattern, all seams land on framing, and corners are clean and square. When boarding is done right, the taping crew can go straight to work in your Sierra Springs home.
Board types used in Sierra Springs homes
Standard board for most walls
Standard 1/2″ drywall is correct for most interior walls and ceilings in Sierra Springs away from moisture exposure — it is what most of your walls and ceilings should be.
Moisture-resistant, fire-rated and soundproof where it matters
Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need 5/8″ Type X fire-rated board; party walls benefit from soundproof board. We specify the right product for each Sierra Springs surface at the on-site quote.
Common drywall installation situations in Sierra Springs
Sierra Springs homes bring us a mix of basement development in the newer walkout lots and the standard repair work -- cracks, nail pops and texture matching -- that comes with any Airdrie community settling in over its first several years. That is the standard on every job here, big or small — on-site quote, fixed price.
Why Sierra Springs homeowners trust Emplastrum for drywall installation
Boarded the way a taping specialist wants it
We are a mudding and taping specialist, so we board every Sierra Springs job the way we would want to receive it — straight, square and tight — because that is what lets us finish it to Level 4 without fighting the installation underneath.
Fixed price, same-day reply
We install drywall across Sierra Springs and all of Airdrie, 7 days a week. Free on-site quotes and fixed prices, and we stand behind the work. If something is not right, we come back and make it right.
How it works
Simple, clean, on schedule
1
Free quote
We come out, take a look, and give you a real price. No guessing after.
2
Book a day
We pick a date that works for you and show up when we say.
3
The work
We keep the dust down and tidy up before we head out.
4
Walk it with you
We don't pack up till you've looked it over and you're happy.
Reviews
Rated by Calgary homeowners
★★★★★
Emplastrum Drywall is rated on Google by Calgary homeowners.
Read the reviews or leave your own after your project.
Drywall Installation Sierra Springs: your questions answered
Do you do drywall installation in Sierra Springs?›
Yes — Sierra Springs is part of our regular service area, and we are usually booked within the week. We also cover Bayside, Kings Heights, Williamstown and every Calgary quadrant.
Do you hang the ceiling board first?›
Yes, always. Ceiling board goes up before wall board on every job in Sierra Springs — the wall board helps carry the ceiling board, and reversing the sequence leaves joints more likely to crack.
What board do you use for exterior basement walls in Sierra Springs?›
Moisture-resistant board on exterior foundation walls and wet areas, standard board elsewhere, and fire-rated or soundproof board where a legal suite calls for it. We specify the right product at the on-site quote.
How long does drywall installation take in a Sierra Springs home?›
A standard basement typically takes one to two days to board; a full new build or larger renovation takes longer. We give you a realistic timeline at the on-site quote.
Do you stand behind your drywall installation in Sierra Springs?›
Yes. We walk the finished boarding with you before we pack out, and if something is not right we come back and make it right.
Our Sierra Springs basement walkout has a damp patch on the drywall -- is that something you handle?›
We repair water-damaged drywall and identify whether the section needs simple drying and patching or a fuller cut-out and re-board -- if there's an ongoing moisture source we'll flag it before we close the wall back up.
First coat on an upright joint. in a basement in Airdrie Alberta
Putting in extra effort to ensure customer is satisfied with popcorn texture match
Popcorn ceiling texture match up in the aftermath of a poly b pipe replacement
The proper way to coat a ceiling drywall ceiling patch before texture match
Finishing a customer installed drywall job in Nolan Hill Calgary AB
Level 5 skim - Emplastrum Drywall
Spraying water on a popcorn ceiling and removing the texture with a pan
Level 5 ceiling with a hawk and trowel
Coating a new corner bead during reno
Drywall Repair in Calgary - Emplastrum Drywall
Asking contractor how much of the customers work i should fix
Level 5 finish Ceiling with trouble light - Emplastrum Drywall