Free on-site drywall quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Fire-rated drywall in Cochrane, installed to code

Fire-rated drywall is not optional where the code calls for it. Garage-to-house separations, basement suites and party walls all need Type X board in a rated assembly to pass inspection and keep a home safe. In Cochrane we install fire-rated drywall to code and finish it clean. Cochrane is a growing community where reno, repair and finishing drywall are common, so fire-rated work here is common on garages and suites. We cover all of Cochrane, 7 days a week.

  • Type X fire-rated board to code in Cochrane
  • Garage-to-house firewall separations
  • Basement legal-suite fire separations
  • Party walls between units
  • Rated assemblies installed and sealed correctly
  • Cochrane coverage. We come to you
  • Finished clean and inspection-ready

What affects the cost of fire-rated drywall in Cochrane?

Area and assembly

The cost in Cochrane depends on the area and the rated assembly required. A single-layer garage ceiling is different from a two-layer party wall. Type X board costs more than standard, and the rating dictates the build-up. We price off the spec and a site look.

Passing inspection in Cochrane, AB

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Cochrane project passes the first time.

Our Cochrane fire-rated drywall process, step by step

Right board, right build-up

In Cochrane we confirm the required rating, then install the correct Type X board in the right layers. The assembly carries the rating, not the board on its own.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. You get an inspection-ready, code-compliant separation that also looks finished.

Fire-rated garages, suites and party walls in Cochrane, AB

Garage firewalls

The most common fire-rated job in Cochrane is the garage-to-house separation Type X board on the common wall and ceiling. We install and finish it to code.

Legal suites and party walls

Basement legal suites and multi-unit party walls are frequent here. We build the rated separations these require. See our Cochrane legal suite drywall page.

Common fire-rated situations in Cochrane, AB

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When a Cochrane basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

Which part of Cochrane the rated work comes from

The newer build-outs: garages and party walls

Crawford Ranch, Towers Trail, Fireside, Sunset Ridge, Heritage Hills and RiverSong are Cochrane’s newer communities, and almost everything rated we do there is either the garage-to-house separation on a garage that is being finished for the first time, or the party wall in Cochrane’s attached and laned product. These are homes in their first years, so the board is going onto clean framing and the sequencing is simple. Confirm the build-up on the plans, install it, seal it, finish it.

Downtown Cochrane and the older stock: suites and retrofits

The other half of our rated work is a retrofit. Downtown Cochrane mixes older character homes with newer infill, and when a lower level there becomes a secondary suite the separation between the suite and the main floor has to be built, not patched. Which usually means opening up a ceiling that was finished to an older standard and dealing with whatever is actually in it. Bow Ridge homes are now twenty to thirty years old, and a rated job there is normally an existing garage ceiling or common wall coming down before the Type X goes up. In Glenbow and the East End we also hit plaster and lath, which changes the demolition more than it changes the board.

Rated separations in a Cochrane walkout or daylight lower level

Why the lot changes the work

River Heights sits above the Bow River valley, and Riverview, Southridge and the RiverSong-area builds carry a lot of walkout and daylight lower levels. When one of those becomes a suite, the rated separation has to carry across a floor that also has a walkout door, mechanical chases, a sump and very often a pot-light ceiling. Penetrations are where a rated assembly fails, so on a Cochrane walkout that is where the hours go. Every light, duct, pipe and wire through the rated plane gets treated as part of the assembly rather than something to patch around afterwards.

Finishing it so it does not read as a firewall

A rated ceiling in a finished lower level is still a room you live in. We tape and finish the Type X to the same standard as the rest of the level, and in the higher-end RiverSong and Sunterra Ridge builds, where the surrounding walls are often a Level 5 skim, we match that rather than leaving a flat-taped band where the rated assembly stops.

What a Cochrane fire-rated quote covers, and what we will not do

Priced from the plans and a site look, together

A rated assembly is the one job where the paperwork and the room have to agree. We read the build-up off your plans, then walk the actual space to see what is already there. Framing spacing, what the existing ceiling is, where the mechanical runs, whether the garage slab and the house floor are at different heights. Your fixed price covers the Type X board in the layers the plans call for, firestopping and sealing at the penetrations and edges, taping and finishing to match the surrounding surfaces, and the clean-up.

What we will not do

We will not quote a rated assembly over the phone, and we will not build to a rating you have been told about verbally. We work to what is on your permit and plans. We do not design the assembly for you either: if your Cochrane project does not yet have a spec, we will say so at the quote rather than guess at one and leave you with a separation that does not match the paperwork at inspection.

How does a Fire-Rated Drywall job in Cochrane actually run?

1

What does the free quote cover?

A fixed price for Fire-Rated Drywall Cochrane comes from seeing it in person at your Cochrane home: scope confirmed on site, then a number that does not change.

2

How soon can you book a day?

One date, agreed and kept. Fire-Rated Drywall Cochrane starts when we said it would, with the right materials already on the truck.

3

What happens on the day?

Dust control is set up first (sheeting, sealed openings, containment), then Fire-Rated Drywall Cochrane is taken through to a paint-ready finish in your Cochrane home.

4

Do you walk the job with me before you go?

You sign off, not us. We go through the completed Fire-Rated Drywall Cochrane with you at the Cochrane home and fix anything that is not right that day.

What do homeowners say about our work in Cochrane, AB?

4.9 from 61 Google reviews

Cochrane homeowners come to Emplastrum Drywall for fire-rated drywall: repairs, restoration and a proper finish. Every review is a real one, left on Google by a Cochrane customer.

Have a look through them before you decide, and leave one yourself once your Cochrane job is done.

Read our reviews on Google

Fire-Rated Drywall Cochrane: your questions answered

Do you install fire-rated drywall in Cochrane?

Yes. Fire-rated drywall in Cochrane is part of our regular work, and we are usually booked within the week. We also cover Bow Ridge, Fireside, Fox Run and every other Cochrane neighbourhood.

Where is fire-rated drywall required?

Garage-to-house separations, basement legal suites and party walls between units typically require Type X board in a rated assembly. We confirm what your Cochrane project needs.

Will it pass inspection in Cochrane?

Yes. We install the correct Type X assembly and seal penetrations to spec so your Cochrane separation passes inspection.

Can you finish the fire-rated board too?

Yes. We install the rated assembly and finish it clean and paint-ready, so it meets code and looks finished.

Do you stand behind your fire-rated work in Cochrane?

Yes. We install to code and walk the Cochrane job with you, and if something is not right we come back and make it right.

We are putting a secondary suite into a Downtown Cochrane lower level. Can you build the fire separation?

Yes, and it is one of the more common rated jobs we get in Cochrane. In the older Downtown Cochrane stock the separation has to be built rather than patched, so we open the existing ceiling, confirm the build-up against your plans, install the Type X in the layers the spec calls for, seal the penetrations, then finish it to match the rest of the suite.

Our Bow Ridge garage ceiling was finished years ago. Does it have to come down?

Often, yes Bow Ridge homes are twenty to thirty years old and a garage ceiling finished to an older standard will not always match the assembly your plans now call for. We look at what is actually up there before we quote, because the honest answer depends on the existing build-up, not on the age of the house.

Does a walkout lower level change the rated assembly?

It changes where the work is, not the rating. A Cochrane walkout or daylight lower level (common in River Heights, Riverview and the RiverSong area) usually has more penetrations through the rated plane: a walkout door head, mechanical chases, a sump, pot lights. Those penetrations are the part that has to be sealed properly, so that is where the time goes.

Emplastrum Drywall — Fire-Rated Drywall Cochrane | Taping, Mudding, Ceilings & Painting

Do we also tape, mud, finish ceilings and paint in Cochrane?

Which areas do we serve?

What other work do we take on in Cochrane, AB?

Need a Cochrane drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations, start to finish.

Your Drywall Contractor in Cochrane →

What else we can do while we are in Cochrane, AB

Drywall Tips & Guides: Cochrane, AB

Get Your Free Drywall Quote
Tell us about your drywall project. We’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote