Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Fire-rated drywall in Evergreen, installed to code

In Evergreen the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Evergreen we install fire-rated drywall to code and finish it clean. Evergreen is an SW Calgary community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Evergreen, Aspen Woods, West Springs, Cougar Ridge and every Calgary quadrant, 7 days a week.

Fire-Rated Drywall Evergreen

More clips — use the arrows (or swipe) and tap any one to watch it in the player above.

What affects the cost of fire-rated drywall in Evergreen?

Area and assembly

The cost in Evergreen depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. Expect Type X to price above regular board; the Evergreen assembly build follows the rating. We price off the spec and a site look.

Passing inspection in Evergreen

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Evergreen project passes the first time. A lot of our Evergreen work starts in the basement, where the ceiling has to stay openable for the plumbing above it.

Our Evergreen fire-rated drywall process, step by step

Right board, right build-up

In Evergreen we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. Code-compliant, inspection-ready and visually finished — the Evergreen outcome.

Fire-rated garages, suites and party walls in Evergreen

Garage firewalls

The most common fire-rated job in Evergreen is the garage-to-house separation — Type X board on the common wall and ceiling. To-code install and finish.

Party walls and legal suites

Both are regular calls across Evergreen. We build the rated separations these require. See our legal suite drywall page. Orange peel is common on Evergreen walls, and the spray tip and timing matter more than the mud for getting it to disappear.

Common fire-rated situations in Evergreen

In Evergreen, evergreen is a community built out in the 2000s. Homes of that vintage generally have knockdown ceilings and orange-peel walls, and the common calls are settling cracks, nail pops and basement development. One fixed price after an honest on-site look, and the job done right the first time.

Why Evergreen homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Evergreen we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Evergreen and every Calgary quadrant, 7 days a week. You get the Evergreen number before we start, a tidy site and work we stand behind. Any issue on an Evergreen job earns a return trip and a proper fix. Knockdown is the standard ceiling texture through Evergreen, so a patch gets tested for match before the whole ceiling is sprayed.

Simple, clean, on schedule — Fire-Rated Drywall in Evergreen Calgary

1

Free quote

A fixed price for the fire-rated drywall comes from seeing it in person at your Evergreen Calgary home — scope confirmed on site, then a number that does not change.

2

Book a day

We book around you, not around our week. When the day comes the Evergreen Calgary crew is there at the agreed time, loaded for the fire-rated drywall.

3

The work

Floors get covered and doorways sealed before the fire-rated drywall begins. Your Evergreen Calgary home stays liveable while we work, and the site is tidied each day.

4

Walk it with you

The last step is you inspecting the fire-rated drywall yourself. Anything you point out at the Evergreen Calgary property gets handled before the crew leaves.

Rated by Calgary Homeowners

Evergreen Calgary homeowners come to Emplastrum Drywall for fire-rated drywall — repairs, restoration and a proper finish. Every review is a real one, left on Google by a Calgary customer.

Have a look through them before you decide — and leave one yourself once your Evergreen Calgary job is done.

Read our reviews on Google

What fire-rated drywall usually involves in Evergreen

Housing in Evergreen is mixed enough that two jobs on the same street can need completely different fire-rated drywall work.

Much of Evergreen carries an orange-peel finish, where a patch that is technically flat can still stand out because the spray pattern does not line up.

Basements in Evergreen run cooler and damper than the rest of the house, and that affects both the board choice and how long each coat needs.

Fire-Rated Drywall Evergreen: your questions answered

Do you install fire-rated drywall in Evergreen?
Yes — fire-rated drywall in Evergreen is part of our regular work, and we are usually booked within the week. We also cover Aspen Woods, West Springs, Cougar Ridge and every Calgary quadrant.
Where is fire-rated drywall required?
Garage separations, legal suites and party walls are where Evergreen homes typically need rated Type X assemblies. We confirm what your Evergreen project needs.
Will it pass inspection in Evergreen?
Yes — we install the correct Type X assembly and seal penetrations to spec so your Evergreen separation passes inspection.
Can you finish the fire-rated board too?
Yes — code-met and clean-finished: the Evergreen rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Evergreen?
Yes. We install to code and walk the Evergreen job with you, and if something is not right we come back and make it right.
Emplastrum Drywall — Fire-Rated Drywall Evergreen | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Evergreen Calgary — Taping, Mudding, Ceilings & Painting

We cover Evergreen Calgary as part of our wider Fire-Rated Drywall Calgary service — see every neighbourhood we work in, or talk to your drywall contractor in Calgary.

We also serve nearby

Other services in Calgary

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

What else we can do while we are in Evergreen

Drywall Tips & Guides — Evergreen Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook