Do you install fire-rated drywall in Highwood?

Yes — fire-rated drywall in Highwood is part of our regular work, and we are usually booked within the week. We also cover Brentwood, Charleswood, Collingwood and every Calgary quadrant.

Where is fire-rated drywall required?

Garage-to-house separations, basement legal suites and party walls between units typically require Type X board in a rated assembly. We confirm what your Highwood project needs.

Will it pass inspection in Highwood?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Highwood separation passes inspection.

Can you finish the fire-rated board too?

Yes — we install the rated assembly and finish it clean and paint-ready, so it meets code and looks finished.

Do you stand behind your fire-rated work in Highwood?

Yes. We install to code and walk the Highwood job with you, and if something is not right we come back and make it right.

Is it worth keeping the original plaster in our Highwood character home, or should we just replace it with drywall?

Depends on the damage — small areas are usually cheaper and more true-to-character to repair in place; if a whole wall is failing, replacing with drywall and matching the surrounding texture is often the better long-term call. We'll tell you honestly which applies.

Fire-Rated Drywall Highwood Calgary

Fire-rated drywall in Highwood, installed to code

Fire-rated drywall is not optional where the code calls for it — garage-to-house separations, basement suites and party walls all need Type X board in a rated assembly to pass inspection and keep a home safe. In Highwood we install fire-rated drywall to code and finish it clean. Highwood is an older NW Calgary community where settling cracks, aging texture and the occasional plaster repair come up, so fire-rated work here is common on garages and suites. We cover Highwood, Brentwood, Charleswood, Collingwood and every Calgary quadrant, 7 days a week.

Type X fire-rated board to code in Highwood
Garage-to-house firewall separations
Basement legal-suite fire separations
Party walls between units
Rated assemblies installed and sealed correctly
Highwood coverage — we come to you
Finished clean and inspection-ready

What affects the cost of fire-rated drywall in Highwood?

Area and assembly

The cost in Highwood depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. Type X board costs more than standard, and the rating dictates the build-up. We price off the spec and a site look.

Passing inspection in Highwood

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Highwood project passes the first time.

Our Highwood fire-rated drywall process, step by step

Right board, right build-up

In Highwood we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. You get an inspection-ready, code-compliant separation that also looks finished.

Fire-rated garages, suites and party walls in Highwood

Garage firewalls

The most common fire-rated job in Highwood is the garage-to-house separation — Type X board on the common wall and ceiling. We install and finish it to code.

Legal suites and party walls

Basement legal suites and multi-unit party walls are frequent here. We build the rated separations these require. See our legal suite drywall page.

Common fire-rated situations in Highwood

Highwood is one of the area's older, character neighbourhoods, so the work here runs to genuine plaster repair, taking down dated textured ceilings, and patching into original lath-and-plaster surfaces so a repair disappears. Where owners are renovating or building infills, we also handle full new-construction boarding and finishing. One fixed price after an honest on-site look, and the job done right the first time.

Why Highwood homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Highwood we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Highwood and every Calgary quadrant, 7 days a week. Free on-site quotes and fixed prices — you know the number before we start, we keep the site clean, and we stand behind the work. If something is not right, we come back and make it right.

How it works

Simple, clean, on schedule

Free quote

We come out, take a look, and give you a real price. No guessing after.

Book a day

We pick a date that works for you and show up when we say.

The work

We keep the dust down and tidy up before we head out.

Walk it with you

We don't pack up till you've looked it over and you're happy.

Reviews

Rated by Calgary homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is rated on Google by Calgary homeowners.

Read the reviews or leave your own after your project.

Read our reviews on Google

FAQ — Fire-Rated Drywall Highwood

Fire-Rated Drywall Highwood: your questions answered

Do you install fire-rated drywall in Highwood?›: Yes — fire-rated drywall in Highwood is part of our regular work, and we are usually booked within the week. We also cover Brentwood, Charleswood, Collingwood and every Calgary quadrant.
Where is fire-rated drywall required?›: Garage-to-house separations, basement legal suites and party walls between units typically require Type X board in a rated assembly. We confirm what your Highwood project needs.
Will it pass inspection in Highwood?›: Yes — we install the correct Type X assembly and seal penetrations to spec so your Highwood separation passes inspection.
Can you finish the fire-rated board too?›: Yes — we install the rated assembly and finish it clean and paint-ready, so it meets code and looks finished.
Do you stand behind your fire-rated work in Highwood?›: Yes. We install to code and walk the Highwood job with you, and if something is not right we come back and make it right.
Is it worth keeping the original plaster in our Highwood character home, or should we just replace it with drywall?›: Depends on the damage — small areas are usually cheaper and more true-to-character to repair in place; if a whole wall is failing, replacing with drywall and matching the surrounding texture is often the better long-term call. We'll tell you honestly which applies.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

Fire-Rated Drywall Highwood

Fire-rated drywall in Highwood, installed to code