Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Fire-rated drywall in Hillhurst, installed to code

In Hillhurst the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Hillhurst we install fire-rated drywall to code and finish it clean. Hillhurst is an older NW Calgary community where settling cracks, aging texture and the occasional plaster repair come up, so fire-rated work here is common on garages and suites. We cover Hillhurst, Brentwood, Charleswood, Collingwood and every Calgary quadrant, 7 days a week.

Fire-Rated Drywall Hillhurst

More clips — use the arrows (or swipe) and tap any one to watch it in the player above.

What affects the cost of fire-rated drywall in Hillhurst?

Area and assembly

The cost in Hillhurst depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. Expect Type X to price above regular board; the Hillhurst assembly build follows the rating. We price off the spec and a site look.

Passing inspection in Hillhurst

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Hillhurst project passes the first time. Hillhurst has infill builds next door to original houses, so two homes on one street can need completely different work.

Our Hillhurst fire-rated drywall process, step by step

Right board, right build-up

In Hillhurst we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. Code-compliant, inspection-ready and visually finished — the Hillhurst outcome. Some Hillhurst homes are plaster rather than drywall behind the paint, which changes the repair entirely.

Fire-rated garages, suites and party walls in Hillhurst

Garage firewalls

The most common fire-rated job in Hillhurst is the garage-to-house separation — Type X board on the common wall and ceiling. To-code install and finish.

Party walls and legal suites

Both are regular calls across Hillhurst. We build the rated separations these require. See our legal suite drywall page.

Common fire-rated situations in Hillhurst

In Hillhurst, in an established, older community like Hillhurst we spend a lot of time repairing cracked and settled plaster, refinishing tired walls and ceilings, and blending patches into original textured surfaces — plus new-construction drywall on the infill homes replacing original lots. Assessed on site, priced up front, and finished properly — every time.

Why Hillhurst homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Hillhurst we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Hillhurst and every Calgary quadrant, 7 days a week. You get the Hillhurst number before we start, a tidy site and work we stand behind. Any issue on a Hillhurst job earns a return trip and a proper fix. Infill construction in Hillhurst means new-build finishing and old-house repair often run on the same block.

Simple, clean, on schedule — Fire-Rated Drywall in Hillhurst Calgary

1

Free quote

A fixed price for the fire-rated drywall comes from seeing it in person at your Hillhurst Calgary home — scope confirmed on site, then a number that does not change.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Hillhurst Calgary. No back-and-forth rescheduling.

3

The work

Floors get covered and doorways sealed before the fire-rated drywall begins. Your Hillhurst Calgary home stays liveable while we work, and the site is tidied each day.

4

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Hillhurst Calgary.

Rated by Calgary Homeowners

For fire-rated drywall in Hillhurst Calgary, Emplastrum Drywall handles the repair, the restoration and the finish. What Calgary homeowners think of that work is on our Google profile.

Read what other people said, then tell us how we did on your own fire-rated drywall job in Hillhurst Calgary.

Read our reviews on Google

What we tend to find in Hillhurst

Hillhurst has been through many freeze-thaw cycles, so before quoting fire-rated drywall we look at whether a crack is old movement that has stopped or something still opening.

Hillhurst has infill builds next to original houses, so two homes a few doors apart can need completely different work.

Some Hillhurst homes are plaster rather than drywall behind the paint, which changes the repair entirely — different backing, different bonding, different failure mode.

Fire-Rated Drywall Hillhurst: your questions answered

Do you install fire-rated drywall in Hillhurst?
Yes — fire-rated drywall in Hillhurst is part of our regular work, and we are usually booked within the week. We also cover Brentwood, Charleswood, Collingwood and every Calgary quadrant.
Where is fire-rated drywall required?
Garage separations, legal suites and party walls are where Hillhurst homes typically need rated Type X assemblies. We confirm what your Hillhurst project needs.
Will it pass inspection in Hillhurst?
Yes — we install the correct Type X assembly and seal penetrations to spec so your Hillhurst separation passes inspection.
Can you finish the fire-rated board too?
Yes — code-met and clean-finished: the Hillhurst rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Hillhurst?
Yes. We install to code and walk the Hillhurst job with you, and if something is not right we come back and make it right.
Emplastrum Drywall — Fire-Rated Drywall Hillhurst | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Hillhurst Calgary — Taping, Mudding, Ceilings & Painting

We cover Hillhurst Calgary as part of our wider Fire-Rated Drywall Calgary service — see every neighbourhood we work in, or talk to your drywall contractor in Calgary.

We also serve nearby

Other services in Calgary

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

What else we can do while we are in Hillhurst

Drywall Tips & Guides — Hillhurst Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook