Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Batt insulation in Jensen, cut to fit rather than stuffed in

Batt is the most common insulation in Calgary homes and the easiest one to install badly. The material hardly varies between suppliers -- what varies on a Jensen job is whether somebody cut each piece to the bay it is going into, or forced an oversized one in and carried on. In Jensen that difference is invisible the moment the board goes on, and it is the whole difference in how the wall performs. Jensen is an established Airdrie community where reno, repair and ceiling drywall are common, so basement development and the occasional upgrade where older insulation has settled or thinned are common here. We cover Jensen and all of Airdrie, 7 days a week.

Batt Insulation Jensen

Watch batt insulation jobs in Jensen Airdrie on our YouTube channel

What affects the cost of batt insulation in Jensen?

Area, material and how awkward the framing is

Batt cost in Jensen tracks the wall and ceiling area, the material — mineral wool costs more than fibreglass — and how much of the framing is full, clean bays versus narrow, boxed or obstructed ones. Awkward framing runs slower, and that is where most of the labour on a Jensen job goes.

What does not change it much

The batt itself is close to a commodity. Two quotes for the same Jensen wall rarely differ over material -- they differ over how much time is being allowed to fit it. A lot of our Jensen work starts in the basement, where the ceiling has to stay openable for the plumbing above it.

Fibreglass or mineral wool for your Jensen walls

Fibreglass batt

Fibreglass is what goes into most Jensen walls and ceilings: lighter, cheaper, and stocked in the depths ordinary framing calls for. For the majority of Jensen homes it is the right answer.

Mineral wool

Mineral wool is denser and stiffer. It keeps its shape in a Jensen bay without sagging, does not take on water the way fibreglass can, and does more where sound matters. It costs more and it usually earns that on party walls, mechanical rooms and anywhere a Jensen wall has a job beyond holding heat.

Which we recommend

We will tell you where mineral wool is worth the difference and where it is not, instead of defaulting to whatever is on the truck. A lot of our Jensen work starts in the basement, where the ceiling has to stay openable for the plumbing above it.

Sizing and fit in a Jensen wall -- the part that decides whether it works

The batt has to match the bay

In a Jensen wall the depth has to suit the framing and the width has to suit the spacing. A batt sized for one spacing forced into another either compresses at the edges or leaves a gap down one side, and both undo what you paid for.

Compressed batt performs worse than less batt

Squeezing a thicker batt into a shallower cavity does not add performance in a Jensen wall -- it removes it, because the air the material depends on gets pressed out.

Faced or unfaced

Which one belongs there depends on the rest of the assembly. Getting it wrong -- or putting a facing on the wrong side -- matters in a Jensen wall, and it is confirmed before anything is installed rather than after. In Jensen basements the deciding detail is usually access: what has to stay reachable once the ceiling is closed up.

Where batt goes in a Jensen home

Exterior walls

The obvious one, and where gaps cost you the most in a Jensen home.

Interior walls

Bedrooms, bathrooms, laundry and media walls get insulated for sound even though they sit inside the heated envelope -- cheap while the wall is open.

Ceilings and floors

Between heated and unheated space, and between storeys where noise matters.

The awkward places

basement development and the occasional upgrade where older insulation has settled or thinned are common here, so the narrow bays beside windows, boxed headers, corners and the space behind electrical boxes are where the time goes in Jensen -- those are the spots that get stuffed or skipped, and they are why a wall underperforms. Once it is filled, our drywall boarding crew closes it in.

Why Jensen homeowners have us do the batt

The material is commodity, the fit is not

Every contractor in Jensen can buy the identical batt. What you are actually buying is whether each piece was cut to its bay in your Jensen home or forced into it — and that is a labour decision, not a product one.

What we find on work done by others

Batt stuffed behind wiring instead of split around it, pieces cut short at the top plate, narrow bays left empty, facing stapled to the wrong side. Every one of them is invisible after boarding.

Fixed price, same-day reply

We cover Jensen and all of Airdrie, 7 days a week. Free on-site quotes in Jensen and a fixed price before any work starts. A lot of our Jensen work starts in the basement, where the ceiling has to stay openable for the plumbing above it.

Simple, clean, on schedule — Batt Insulation in Jensen Airdrie

1

Free quote

The quote happens at your Jensen Airdrie home, in front of the work. We measure, we look at what is behind the wall where it matters, and the price we give is the price.

2

Book a day

Scheduling is settled in one conversation. The batt insulation start date in Jensen Airdrie is confirmed and the team turns up on it.

3

The work

We work clean. The Jensen Airdrie property is masked off before the batt insulation starts and put back the way we found it, finished to a paint-ready standard.

4

Walk it with you

Before we call the Jensen Airdrie job finished we walk it together under proper light. If a spot needs another pass, it gets one.

Rated by Airdrie Homeowners

Emplastrum Drywall is the batt insulation contractor Jensen Airdrie trusts for repair, restoration and finishing — rated on Google by Airdrie homeowners.

Read the reviews, or leave your own after your batt insulation project in Jensen Airdrie.

Read our reviews on Google

What batt insulation usually involves in Jensen

In Jensen we see original finishes and recent renovations on the same block, so the batt insulation is scoped per house, not per postcode.

A lot of the work in Jensen starts in the basement, where the ceiling has to stay openable for the plumbing and ducting above it.

Batt Insulation Jensen: your questions answered

Fibreglass or mineral wool batt for a Jensen home?
Fibreglass suits most walls and ceilings. Mineral wool earns the difference in a Jensen home where sound matters, where the wall may see moisture, or where you want a batt that holds its shape in the bay instead of sagging over time.
What thickness of batt fits a 2x4 wall in a Jensen home?
In a Jensen home a 2x4 wall takes a batt built for that depth, and a 2x6 wall takes a deeper one. The one thing not to do in a Jensen wall is force a deeper batt into a shallower cavity -- compressing it makes it perform worse, not better.
Do I need faced or unfaced batt in Jensen?
It comes down to the rest of the Jensen assembly, particularly whether a separate vapour barrier is going over it. We confirm it on site in Jensen rather than assuming, because a facing on the wrong side cannot be corrected once the wall is closed.
The batt in my Jensen walls is sagging or squashed — can that be fixed?
If the Jensen wall is open, yes -- it is usually a matter of pulling what is there, cutting it properly and refitting, sometimes in a stiffer material that will not slump. If the Jensen wall is already closed, blown-in material is normally the better route.
Do you insulate interior walls in Jensen?
Yes -- interior walls in a Jensen home are insulated for sound rather than heat, and doing it while the wall is open is cheap compared with wishing you had later. We also cover Bayside, Kings Heights, Coopers Crossing and the Airdrie area.
Emplastrum Drywall — Batt Insulation Jensen | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Jensen Airdrie — Taping, Mudding, Ceilings & Painting

We cover Jensen Airdrie as part of our wider Batt Insulation Airdrie service — see every neighbourhood we work in, or talk to your drywall contractor in Airdrie.

We also serve nearby

Other services in Airdrie

Need Airdrie’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Airdrie →

Poly-B repair, drywall & painting in Jensen Airdrie

Insulation in, board on, same crew — see Drywall Boarding Jensen Airdrie.

Most exterior walls need poly over the batt: see Vapour Barrier Jensen Airdrie.

Other jobs we take on in Jensen

Drywall Tips & Guides — Jensen Airdrie

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook