Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Loose fill insulation in Calgary, for the cavities batt cannot reach

Batt only works where someone can get a piece of it into the cavity square and uncompressed. Loose fill is what handles everything else — irregular bays, cavities that are already closed up, and spaces where the framing is too tight or too awkward to fit a batt properly. In Calgary we handle blown-in cellulose and fibreglass as part of the same job as the drywall. Calgary is a city with everything from inner-city character homes to brand-new suburbs, so insulation calls here range from basement development in the newer homes to attic and wall upgrades in the older ones nearby. We cover all of Calgary, 7 days a week.

Loose Fill Insulation Calgary

Watch loose fill insulation jobs in Calgary on our YouTube channel

What affects the cost of loose fill insulation in Calgary?

Volume, depth and access

Loose fill cost in Calgary comes down to the area being covered, the depth it is being brought up to, and how hard the space is to get a hose into. We assess it on site and give a fixed price before anything starts.

Removing what is there first

If existing material has to come out before new goes in, that is priced separately and we tell you before the visit, not partway through it.

Cellulose or blown fibreglass — which one for your Calgary home

Cellulose

Cellulose is denser, made largely from recycled paper, and packs into irregular spaces well. It is often the better answer for closed cavities and for filling around obstructions.

Blown fibreglass

Blown fibreglass is lighter, does not absorb moisture the way cellulose can, and settles less over time. It is usually the choice where weight on the ceiling below is a consideration.

How we choose

We pick based on the cavity, what is already in it, and what the space is doing — not on what is easiest to load into the machine that day.

Where loose fill beats batt — and where it does not

Where it wins

Loose fill fills what it is blown into, so it beats batt in irregular bays, around wiring and pipes, and anywhere the framing is not a clean rectangle. It is also the only practical option for a cavity that is already closed and cannot be opened up.

Where batt is still the right call

In an open, regular Calgary wall being built or renovated, batt cut to fit is usually the better answer — it is easier to inspect before boarding and it does not depend on getting even coverage from a hose. If your walls are open, see our insulation installation options before defaulting to blown-in.

We will tell you which one you need

Recommending loose fill for a wall that should get batt is an easy way to make a job simpler, and it is not how we quote.

Common loose fill situations in Calgary

Closed walls and ceilings

insulation calls here range from basement development in the newer homes to attic and wall upgrades in the older ones nearby, so bringing insulation up in cavities that are already finished — without tearing the room apart — is one of the most common reasons loose fill comes up here.

Topping up what is there

Existing insulation that has settled or was thin to begin with can usually be brought up to an even depth rather than replaced.

Awkward framing

Tight bays, boxed-out areas and spaces crowded with ductwork or wiring in a Calgary home are exactly where batt struggles and blown material does not.

Attic work

Attics are the most common place loose fill is used — depth, baffles and access are covered on our attic insulation page.

Why Calgary homeowners have us handle the loose fill

One contractor, one point of contact

We handle the insulation and the drywall that closes it in — so there is one company answerable for what ends up inside the wall in your Calgary home, not two trades pointing at each other.

Contained, then cleaned up

Blown material goes everywhere if the work area is not sheeted off first. It gets contained before anything runs, and the space is left clean.

Fixed price, same-day reply

We cover all of Calgary, 7 days a week. Free on-site quotes and a fixed price before any work starts.

Simple, clean, on schedule — Loose Fill Insulation in Calgary

1

Free quote

The quote happens at your Calgary home, in front of the work. We measure, we look at what is behind the wall where it matters, and the price we give is the price.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the loose fill insulation in Calgary. No back-and-forth rescheduling.

3

The work

We work clean. The Calgary property is masked off before the loose fill insulation starts and put back the way we found it, finished to a paint-ready standard.

4

Walk it with you

The last step is you inspecting the loose fill insulation yourself. Anything you point out at the Calgary property gets handled before the crew leaves.

Rated by Calgary Homeowners

Calgary homeowners come to Emplastrum Drywall for loose fill insulation — repairs, restoration and a proper finish. Every review is a real one, left on Google by a Calgary customer.

Go through them, then judge us on your own Calgary project.

Read our reviews on Google

Loose Fill Insulation Calgary: your questions answered

Can you blow insulation into walls that are already finished in Calgary?
Usually yes — that is the main reason loose fill exists. Material goes in through small access holes which are patched and finished afterwards, which is work we do ourselves as a drywall company.
Does loose fill settle over time in a Calgary home?
Some settling is normal, and it is accounted for by installing to the right depth in the first place rather than by topping it up later. Cellulose settles more than blown fibreglass, which is one of the things that decides which material suits a space.
Cellulose or fibreglass — which is better for Calgary?
Neither is better everywhere. Cellulose is denser and fills irregular spaces well; blown fibreglass is lighter and settles less. Which one suits depends on the cavity and what is already in it, and we go through that on the site visit.
Do you take the old insulation out first in Calgary?
Often it is not necessary — new material can be added over insulation that is dry and in reasonable condition. If what is there is wet, damaged, or a material we cannot confidently identify, we stop and have it looked at before anything is disturbed rather than blowing over it.
How messy is blown-in insulation in Calgary?
It is a dusty process, which is why the work area is sheeted off before the machine runs and cleaned afterwards. Done properly the mess stays in the space being worked on. We also cover Royal Oak, Edgemont, Hawkwood and every Calgary quadrant.
Emplastrum Drywall — Loose Fill Insulation Calgary | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Calgary — Taping, Mudding, Ceilings & Painting

Areas we serve

Other services in Calgary

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Poly-B repair, drywall & painting in Calgary

Most blown-in work is attic work — see Attic Insulation Calgary.

Not sure which type you need? See Insulation Installation Calgary.

Drywall Tips & Guides — Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook