Do you frame basement development walls in Calgary?

Yes — framing a basement layout to plan, ready for insulation and drywall, is one of our most common jobs in Calgary. We also cover every Calgary quadrant, plus Airdrie, Cochrane and Chestermere.

Do you do structural or load-bearing framing?

No — we frame interior, non-load-bearing partition walls, basement development layouts and suite separations. Any load-bearing wall, beam or structural change needs a licensed structural engineer and permit, which we can point you toward if your project needs one.

Do you frame in wood or steel?

Both. Wood framing is the common choice for basement development and partition walls; steel stud is the right call for suite separations, sound-rated assemblies and commercial buildouts. We confirm which fits your Calgary project.

Do you also do the drywall after framing in Calgary?

Yes — one crew frames, boards, tapes and finishes, with no handoff between trades. Or we can frame only and hand off a square, ready-to-board frame to your own crew.

Do you stand behind your framing work in Calgary?

Yes. We check every Calgary layout is square and plumb before we hand it off, and if something is not right we come back and make it right.

Framing Contractor Calgary | Emplastrum Drywall

Framing in Calgary, square and ready for drywall

A finished basement or new partition wall is only as good as the frame underneath it. In Calgary we build wood-frame partition and basement development walls — the most common residential framing job — and steel-stud framing for suites, sound-rated assemblies and commercial buildouts, squared, plumbed and spaced to the drywall spec your project needs. Calgary is a mix of newer lake and suburban communities alongside established mid-century neighbourhoods across all four quadrants, so framing calls span new-build basement development in growing communities like Mahogany and Livingston to partition and alteration work in established neighbourhoods across every quadrant. We frame interior, non-load-bearing walls, basement layouts and suite separations — not structural work — and the same crew can go on to board, tape and finish what we frame, so there is no handoff and no gap in accountability. We cover all four Calgary quadrants, Airdrie, Cochrane and Chestermere, 7 days a week.

Wood-frame partition and basement development walls in Calgary
Steel-stud framing for basements, suites and commercial buildouts
Basement development layouts framed to plan
Door and window rough openings framed to spec
Suite and party-wall separation framing
Interior, non-load-bearing partition framing — not structural work
One crew frames, boards, tapes and finishes — no handoffs
Calgary coverage — free on-site quotes, fixed prices, 7 days a week

What affects the cost of framing in Calgary?

Wall length, height and layout

The cost of framing in Calgary tracks the total wall length and height, the number of door and window openings, and how complex the layout is — a single straight partition is quick, a full basement development layout with multiple rooms takes more time and material. We price off your plan or a site walk-through, and give a fixed number before anything starts.

Wood vs steel material cost

Because Calgary is a mix of newer lake and suburban communities alongside established mid-century neighbourhoods across all four quadrants, framing calls span new-build basement development in growing communities like Mahogany and Livingston to partition and alteration work in established neighbourhoods across every quadrant. Wood framing is usually the more cost-effective choice for a straightforward basement or partition wall; steel stud costs more per wall but is the right call where a suite separation, sound rating or commercial spec calls for it.

Our Calgary framing process, step by step

Layout first

We mark wall locations on the floor and ceiling from your plan or your walk-through direction, confirming every wall, door and window opening before a single stud goes up in your Calgary space.

Frame square and plumb

We cut and set the studs — wood or steel — to spacing, check every wall for square and plumb as we go, and frame any bulkheads or soffits the layout calls for. The framing stage is where a crooked wall gets built or avoided, so we take the time here.

Wood framing vs steel-stud framing in Calgary — which does your project need?

Wood framing for basements and partitions

Wood framing is the common residential case — basement development, new partition walls and layout changes in Calgary homes almost always go up in wood, and it is what most homeowner basement projects call for.

Steel-stud framing for suites and commercial work

Steel stud comes in where a project needs it — suite separations, sound-rated party walls, fire-rated assemblies and commercial tenant improvements. See our metal stud framing in Calgary page for that specialist work in detail.

Common framing situations in Calgary

Basement development layouts

A basement development layout is the most common framing job we do in Calgary — framing bedrooms, a bathroom, a media room or a legal suite to the plan, ready for insulation and drywall. See our basement drywall in Calgary page for what comes after the frame is up.

Non-structural partition and alteration work

We frame interior, non-load-bearing partition walls and layout changes — not structural work. Any load-bearing wall, beam or structural alteration needs a licensed structural engineer and permit, and we can point you toward one if your project needs it.

Why Calgary homeowners trust Emplastrum for framing

One crew, frame to finish

As a drywall and finishing company first, we frame walls the way we want to drywall them — square, plumb and properly spaced — because a crooked frame can never be fully hidden by finishing. The same crew can carry your project from framing through boarding, taping and finishing in Calgary, so there is no handoff between trades and no gap in accountability.

Fixed price, same-day reply

We cover all four Calgary quadrants, Airdrie, Cochrane and Chestermere, 7 days a week. Free on-site quotes and fixed prices — you know the number before we start, and we stand behind the work. If something is not right, we come back and make it right.

How it works

Simple, clean, on schedule

Free quote

We come out, take a look, and give you a real price. No guessing after.

Book a day

We pick a date that works for you and show up when we say.

The work

We keep the dust down and tidy up before we head out.

Walk it with you

We don't pack up till you've looked it over and you're happy.

FAQ — Framing Contractor Calgary

Framing Contractor Calgary: your questions answered

Do you frame basement development walls in Calgary?›: Yes — framing a basement layout to plan, ready for insulation and drywall, is one of our most common jobs in Calgary. We also cover every Calgary quadrant, plus Airdrie, Cochrane and Chestermere.
Do you do structural or load-bearing framing in Calgary?›: No — we frame interior, non-load-bearing partition walls, basement development layouts and suite separations. Any load-bearing wall, beam or structural change needs a licensed structural engineer and permit, which we can point you toward if your project needs one.
Do you frame in wood or steel?›: Both. Wood framing is the common choice for basement development and partition walls; steel stud is the right call for suite separations, sound-rated assemblies and commercial buildouts. We confirm which fits your Calgary project.
Do you also do the drywall after framing in Calgary?›: Yes — one crew frames, boards, tapes and finishes, with no handoff between trades. Or we can frame only and hand off a square, ready-to-board frame to your own crew.
Do you stand behind your framing work in Calgary?›: Yes. We check every Calgary layout is square and plumb before we hand it off, and if something is not right we come back and make it right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

Framing Contractor Calgary

Framing in Calgary, square and ready for drywall