Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Batt insulation in Tower Hill, cut to fit rather than stuffed in

Batt is the most common insulation in Calgary homes and the easiest one to install badly. The material hardly varies between suppliers -- what varies on a Tower Hill job is whether somebody cut each piece to the bay it is going into, or forced an oversized one in and carried on. In Tower Hill that difference is invisible the moment the board goes on, and it is the whole difference in how the wall performs. Tower Hill is a Calgary community with a mix of older homes and newer builds, so insulation calls here range from basement development in the newer homes to attic and wall upgrades in the older ones nearby. We cover Tower Hill, Central Heights, Cornerstone, Crystal Ridge and the Okotoks area, 7 days a week.

Batt Insulation Tower Hill

Watch batt insulation jobs in Tower Hill Okotoks on our YouTube channel

What affects the cost of batt insulation in Tower Hill?

Area, material and how awkward the framing is

Batt cost in Tower Hill tracks the wall and ceiling area, the material — mineral wool costs more than fibreglass — and how much of the framing is full, clean bays versus narrow, boxed or obstructed ones. Awkward framing runs slower, and that is where most of the labour on a Tower Hill job goes.

What does not change it much

The batt itself is close to a commodity. Two quotes for the same Tower Hill wall rarely differ over material -- they differ over how much time is being allowed to fit it. A lot of our Tower Hill work starts in the basement, where the ceiling has to stay openable for the plumbing above it.

Fibreglass or mineral wool for your Tower Hill walls

Fibreglass batt

Fibreglass is what goes into most Tower Hill walls and ceilings: lighter, cheaper, and stocked in the depths ordinary framing calls for. For the majority of Tower Hill homes it is the right answer.

Mineral wool

Mineral wool is denser and stiffer. It keeps its shape in a Tower Hill bay without sagging, does not take on water the way fibreglass can, and does more where sound matters. It costs more and it usually earns that on party walls, mechanical rooms and anywhere a Tower Hill wall has a job beyond holding heat.

Which we recommend

We will tell you where mineral wool is worth the difference and where it is not, instead of defaulting to whatever is on the truck. In Tower Hill basements the deciding detail is usually access: what has to stay reachable once the ceiling is closed up.

Sizing and fit in a Tower Hill wall -- the part that decides whether it works

The batt has to match the bay

In a Tower Hill wall the depth has to suit the framing and the width has to suit the spacing. A batt sized for one spacing forced into another either compresses at the edges or leaves a gap down one side, and both undo what you paid for.

Compressed batt performs worse than less batt

Squeezing a thicker batt into a shallower cavity does not add performance in a Tower Hill wall -- it removes it, because the air the material depends on gets pressed out.

Faced or unfaced

Which one belongs there depends on the rest of the assembly. Getting it wrong -- or putting a facing on the wrong side -- matters in a Tower Hill wall, and it is confirmed before anything is installed rather than after. In Tower Hill basements the deciding detail is usually access: what has to stay reachable once the ceiling is closed up.

Where batt goes in a Tower Hill home

Exterior walls

The obvious one, and where gaps cost you the most in a Tower Hill home.

Interior walls

Bedrooms, bathrooms, laundry and media walls get insulated for sound even though they sit inside the heated envelope -- cheap while the wall is open.

Ceilings and floors

Between heated and unheated space, and between storeys where noise matters.

The awkward places

insulation calls here range from basement development in the newer homes to attic and wall upgrades in the older ones nearby, so the narrow bays beside windows, boxed headers, corners and the space behind electrical boxes are where the time goes in Tower Hill -- those are the spots that get stuffed or skipped, and they are why a wall underperforms. Once it is filled, our drywall boarding crew closes it in.

Why Tower Hill homeowners have us do the batt

The material is commodity, the fit is not

Every contractor in Tower Hill can buy the identical batt. What you are actually buying is whether each piece was cut to its bay in your Tower Hill home or forced into it — and that is a labour decision, not a product one.

What we find on work done by others

Batt stuffed behind wiring instead of split around it, pieces cut short at the top plate, narrow bays left empty, facing stapled to the wrong side. Every one of them is invisible after boarding.

Fixed price, same-day reply

We cover Tower Hill and the Okotoks area, 7 days a week. Free on-site quotes in Tower Hill and a fixed price before any work starts. In Tower Hill basements the deciding detail is usually access: what has to stay reachable once the ceiling is closed up.

Simple, clean, on schedule — Batt Insulation in Tower Hill Okotoks

1

Free quote

Someone attends the Tower Hill Okotoks address, inspects what the batt insulation actually involves, and gives you a firm number before leaving. Nothing is estimated from a photo.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the batt insulation in Tower Hill Okotoks. No back-and-forth rescheduling.

3

The work

Floors get covered and doorways sealed before the batt insulation begins. Your Tower Hill Okotoks home stays liveable while we work, and the site is tidied each day.

4

Walk it with you

You sign off, not us. We go through the completed batt insulation with you at the Tower Hill Okotoks home and fix anything that is not right that day.

Rated by Okotoks Homeowners

Homeowners in Tower Hill Okotoks call Emplastrum Drywall for batt insulation work, from a single patch through to a full restoration. Our reviews are on Google, written by Okotoks customers.

Have a look through them before you decide — and leave one yourself once your Tower Hill Okotoks job is done.

Read our reviews on Google

Tower Hill: what shapes the job

Homes in Tower Hill are settled, so the batt insulation is more often repair and refinish than new board — and the repair has to disappear into a surface that has aged.

A lot of the work in Tower Hill starts in the basement, where the ceiling has to stay openable for the plumbing and ducting above it.

Batt Insulation Tower Hill: your questions answered

Fibreglass or mineral wool batt for a Tower Hill home?
Fibreglass suits most walls and ceilings. Mineral wool earns the difference in a Tower Hill home where sound matters, where the wall may see moisture, or where you want a batt that holds its shape in the bay instead of sagging over time.
What thickness of batt fits a 2x4 wall in a Tower Hill home?
In a Tower Hill home a 2x4 wall takes a batt built for that depth, and a 2x6 wall takes a deeper one. The one thing not to do in a Tower Hill wall is force a deeper batt into a shallower cavity -- compressing it makes it perform worse, not better.
Do I need faced or unfaced batt in Tower Hill?
It comes down to the rest of the Tower Hill assembly, particularly whether a separate vapour barrier is going over it. We confirm it on site in Tower Hill rather than assuming, because a facing on the wrong side cannot be corrected once the wall is closed.
The batt in my Tower Hill walls is sagging or squashed — can that be fixed?
If the Tower Hill wall is open, yes -- it is usually a matter of pulling what is there, cutting it properly and refitting, sometimes in a stiffer material that will not slump. If the Tower Hill wall is already closed, blown-in material is normally the better route.
Do you insulate interior walls in Tower Hill?
Yes -- interior walls in a Tower Hill home are insulated for sound rather than heat, and doing it while the wall is open is cheap compared with wishing you had later. We also cover Central Heights, Cornerstone, Crystal Ridge and the Okotoks area.
Emplastrum Drywall — Batt Insulation Tower Hill | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Tower Hill Okotoks — Taping, Mudding, Ceilings & Painting

We cover Tower Hill Okotoks as part of our wider Batt Insulation Okotoks service — see every neighbourhood we work in, or talk to your drywall contractor in Okotoks.

We also serve nearby

Other services in Okotoks

Need Okotoks’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Okotoks →

Poly-B repair, drywall & painting in Tower Hill Okotoks

Insulation in, board on, same crew — see Drywall Boarding Tower Hill Okotoks.

Most exterior walls need poly over the batt: see Vapour Barrier Tower Hill Okotoks.

What else we can do while we are in Tower Hill

Drywall Tips & Guides — Tower Hill Okotoks

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook