Do you install fire-rated drywall in Inglewood?

Yes — fire-rated drywall in Inglewood is part of our regular work, and we are usually booked within the week. We also cover Tuscany, Royal Oak, Rocky Ridge and every Calgary quadrant.

Where is fire-rated drywall required?

Garage separations, legal suites and party walls are where Inglewood homes typically need rated Type X assemblies. We confirm what your Inglewood project needs.

Will it pass inspection in Inglewood?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Inglewood separation passes inspection.

Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Inglewood rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Inglewood?

Yes. We install to code and walk the Inglewood job with you, and if something is not right we come back and make it right.

Our Inglewood home's walls aren't quite straight — will a repair look off?

No — we work with the house's real lines rather than an imaginary plumb wall, so the patch sits flush with what is actually there instead of standing out.

Fire-Rated Drywall Inglewood Calgary

Fire-rated drywall in Inglewood, installed to code

In Inglewood the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Inglewood we install fire-rated drywall to code and finish it clean. Inglewood is an established NW Calgary community where reno, repair and ceiling drywall are common, so fire-rated work here is common on garages and suites. We cover Inglewood, Tuscany, Royal Oak, Rocky Ridge and every Calgary quadrant, 7 days a week.

Type X fire-rated board to code in Inglewood
Garage-to-house firewall separations
Basement legal-suite fire separations
Party walls between units
Rated assemblies installed and sealed correctly
Inglewood coverage — we come to you
Finished clean and inspection-ready

What affects the cost of fire-rated drywall in Inglewood?

Area and assembly

The cost in Inglewood depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. Expect Type X to price above regular board; the Inglewood assembly build follows the rating. We price off the spec and a site look.

Passing inspection in Inglewood

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Inglewood project passes the first time.

Our Inglewood fire-rated drywall process, step by step

Right board, right build-up

In Inglewood we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. Code-compliant, inspection-ready and visually finished — the Inglewood outcome.

Fire-rated garages, suites and party walls in Inglewood

Garage firewalls

The most common fire-rated job in Inglewood is the garage-to-house separation — Type X board on the common wall and ceiling. To-code install and finish.

Party walls and legal suites

Both are regular calls across Inglewood. We build the rated separations these require. See our legal suite drywall page.

Common fire-rated situations in Inglewood

Character homes in Inglewood tend to have settled unevenly over many decades, so wall and ceiling lines are rarely perfectly straight — we work with the house rather than fighting it, patching and skimming so repairs sit flush without chasing a plumb line the original build never had. Free on-site quote, one fixed price, and work that holds up after.

Why Inglewood homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Inglewood we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Inglewood and every Calgary quadrant, 7 days a week. You get the Inglewood number before we start, a tidy site and work we stand behind. Any issue on a Inglewood job earns a return trip and a proper fix.

How it works

Simple, clean, on schedule

Free quote

We come out, take a look, and give you a real price. No guessing after.

Book a day

We pick a date that works for you and show up when we say.

The work

We keep the dust down and tidy up before we head out.

Walk it with you

We don't pack up till you've looked it over and you're happy.

Reviews

Rated by Calgary homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is rated on Google by Calgary homeowners.

Read the reviews or leave your own after your project.

Read our reviews on Google

FAQ — Fire-Rated Drywall Inglewood

Fire-Rated Drywall Inglewood: your questions answered

Do you install fire-rated drywall in Inglewood?: Yes — fire-rated drywall in Inglewood is part of our regular work, and we are usually booked within the week. We also cover Tuscany, Royal Oak, Rocky Ridge and every Calgary quadrant.
Where is fire-rated drywall required?: Garage separations, legal suites and party walls are where Inglewood homes typically need rated Type X assemblies. We confirm what your Inglewood project needs.
Will it pass inspection in Inglewood?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Inglewood separation passes inspection.
Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Inglewood rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Inglewood?: Yes. We install to code and walk the Inglewood job with you, and if something is not right we come back and make it right.
Our Inglewood home's walls aren't quite straight — will a repair look off?: No — we work with the house's real lines rather than an imaginary plumb wall, so the patch sits flush with what is actually there instead of standing out.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Inglewood

Fire-rated drywall in Inglewood, installed to code