Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Sagewood, sealed before the board goes on

Few parts of a Sagewood build are as completely concealed, or as unforgiving, as the vapour barrier; once boarded, a torn sheet or unsealed box is permanent. In Sagewood we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Sagewood is an established Airdrie community where reno and ceiling drywall are typical, so basement development and the occasional upgrade where older insulation has settled or thinned are common here. We cover Sagewood and all of Airdrie, 7 days a week.

What affects the cost of vapour barrier installation in Sagewood?

Area, penetrations and detailing

Vapour barrier cost in Sagewood depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Sagewood vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. Housing in Sagewood is mixed, which is why we look before we quote rather than after.

Vapour barrier placement in a Sagewood home, and why it is not negotiable

The warm side, always

In Sagewood the barrier goes on the warm side of the insulation — the side facing into the heated Sagewood room. That is how indoor moisture is prevented from moving into a Sagewood cavity and condensing on cold framing.

What goes wrong when it is reversed

Installed cold-side, the barrier traps moisture within the assembly rather than keeping it out. It is one of the few mistakes in a Sagewood wall that cannot be corrected without opening the wall back up, which is exactly why we check every Sagewood job before anything is covered. Housing in Sagewood is mixed, which is why we look before we quote rather than after.

How we install and seal it in Sagewood

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Sagewood home. Where poly is on the walls but the boxes behind are open, the barrier does not work; it is the commonest fault we find on part-finished Sagewood jobs.

Common vapour barrier situations in Sagewood

In Sagewood, sagewood is a residential neighbourhood in Airdrie. Build years vary across the neighbourhood, so rather than assume what is behind the wall we confirm it on site — the finish, the texture and how the existing surface has aged all change how the repair is approached. That is the standard on every job here, big or small — on-site quote, fixed price.

Why Sagewood homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Sagewood.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Sagewood and all of Airdrie, 7 days a week. On-site quoting in Sagewood costs nothing, and the price is set before anything starts. Sagewood spans a range of build eras, so what is behind the wall differs street to street.

Simple, clean, on schedule — Vapour Barrier Installation in Sagewood Airdrie

1

Free quote

Before anything is priced we walk the vapour barrier installation with you at the Sagewood Airdrie property. You get a fixed figure that day, not a range that moves later.

2

Book a day

We book around you, not around our week. When the day comes the Sagewood Airdrie crew is there at the agreed time, loaded for the vapour barrier installation.

3

The work

We work clean. The Sagewood Airdrie property is masked off before the vapour barrier installation starts and put back the way we found it, finished to a paint-ready standard.

4

Walk it with you

The vapour barrier installation is not done when the tools are packed — it is done when you have walked it in Sagewood Airdrie and told us it is right.

Rated by Airdrie Homeowners

★ ★ ★ ★ ★

Homeowners in Sagewood Airdrie call Emplastrum Drywall for vapour barrier installation work, from a single patch through to a full restoration. Our reviews are on Google, written by Airdrie customers.

Read the reviews, or leave your own after your vapour barrier installation project in Sagewood Airdrie.

Read our reviews on Google

Vapour Barrier Sagewood: your questions answered

Does my basement development in Sagewood need a vapour barrier?
Yes, essentially always -- our climate means a Sagewood exterior basement wall gets a barrier on the warm side of the insulation before drywall goes on. The requirement for your Sagewood assembly is confirmed in person on the visit, not guessed from the plan.
Which side of the insulation does the poly go on in a Sagewood home?
The warm side of the assembly -- the one looking into the heated Sagewood room. More than anything else on a Sagewood job this gets reversed, and it cannot be corrected after boarding.
Do you seal the outlet boxes and vents in Sagewood?
Yes -- each and every outlet, switch box, vent and pipe going through a Sagewood wall is sealed on its own. Hanging poly over open boxes in Sagewood framing gives you the look of a finished barrier without the performance.
Do I still need a vapour barrier in Sagewood if I have spray foam?
Sometimes it should not go on at all -- some spray foam assemblies in Sagewood homes are already the barrier, and poly over them is the wrong move. It varies with product and thickness, so we verify it on site in Sagewood instead of assuming.
Can you do the vapour barrier and the drywall together in Sagewood?
Yes -- running insulation, barrier and boarding as a single Sagewood job is our usual approach, and it puts one crew on the hook for what ends up in the wall. We also cover Bayside, Kings Heights, Coopers Crossing and the Airdrie area.
Emplastrum Drywall — Vapour Barrier Sagewood | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Sagewood Airdrie — Taping, Mudding, Ceilings & Painting

We cover Sagewood Airdrie as part of our wider Vapour Barrier Installation Airdrie service, across Airdrie — see every neighbourhood we work in, or talk to your drywall contractor in Airdrie.

We also serve nearby

Other services in Airdrie

Need Airdrie’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Airdrie →

Poly-B repair, drywall & painting in Sagewood Airdrie

Poly first, then board — see Basement Drywall Sagewood Airdrie.

Insulation not in yet? Start at Insulation Installation Sagewood Airdrie.

Everything else we handle in Sagewood

Drywall Tips & Guides — Sagewood Airdrie

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook