Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Springbank, sealed before the board goes on

A vapour barrier is one of the few things in a build that is completely hidden and completely unforgiving — once the drywall is on, a torn sheet or an unsealed outlet box stays that way for the life of the wall. In Springbank we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Springbank is a Calgary community with a mix of older homes and newer builds, so insulation calls here range from basement development in the newer homes to attic and wall upgrades in the older ones nearby. We cover all of Springbank, 7 days a week.

Vapour Barrier Springbank

Watch vapour barrier installation jobs in Springbank Calgary on our YouTube channel

What affects the cost of vapour barrier installation in Springbank?

Area, penetrations and detailing

Vapour barrier cost in Springbank depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Springbank vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. On Springbank acreages the work is usually a bigger single push rather than a short in-and-out job.

Which side the vapour barrier goes on, and why that is not optional

The warm side, always

In Springbank the barrier goes on the warm side of the insulation — the side facing into the heated Springbank room. That is what stops indoor moisture from travelling into the wall cavity and condensing when it reaches cold framing.

What goes wrong when it is reversed

A barrier installed on the cold side traps moisture inside the assembly instead of keeping it out. It is one of the few mistakes in a Springbank wall that cannot be corrected without opening the wall back up, which is exactly why we check every Springbank job before anything is covered. On Springbank acreages the work is usually a bigger single push rather than a short in-and-out job.

How we install and seal it in Springbank

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Springbank home. Poly on the walls with open boxes behind it is not a working vapour barrier, and it is the single most common thing we find on jobs that were started by someone else.

Common vapour barrier situations in Springbank

In Springbank, springbank is a rural acreage community in Rocky View County west of Calgary. Country-residential properties tend to be larger than a city build, with bigger open spans and higher ceilings, so access and staging shape the job as much as the technique. Build years vary parcel by parcel out here, so we confirm what is behind the wall on site rather than assuming it from the address. Assessed on site, priced up front, and finished properly — every time.

Why Springbank homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Springbank.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover all of Springbank, 7 days a week. Free on-site quotes and a fixed price before any work starts. Larger Springbank properties often mean bigger open spans and higher ceilings than a standard city build.

Simple, clean, on schedule — Vapour Barrier Installation in Springbank Calgary

1

Free quote

We come out to your Springbank Calgary property, take a real look at the vapour barrier installation, and hand you a fixed price on the spot — no guessing, no vague ballpark.

2

Book a day

We book around you, not around our week. When the day comes the Springbank Calgary crew is there at the agreed time, loaded for the vapour barrier installation.

3

The work

We keep the dust under control and protect your Springbank Calgary home while we finish the vapour barrier installation to a clean, paint-ready standard.

4

Walk it with you

The vapour barrier installation is not done when the tools are packed — it is done when you have walked it in Springbank Calgary and told us it is right.

Rated by Calgary Homeowners

Homeowners in Springbank Calgary call Emplastrum Drywall for vapour barrier installation work, from a single patch through to a full restoration. Our reviews are on Google, written by Calgary customers.

Worth reading before you book. And once the vapour barrier installation work in Springbank Calgary is finished, we would appreciate yours.

Read our reviews on Google

How Springbank homes affect the work

In Springbank we see original finishes and recent renovations on the same block, so the vapour barrier installation is scoped per house, not per postcode.

Larger Springbank properties often mean bigger open spans and higher ceilings than a standard city build, which changes the access and the staging more than the technique.

Vapour Barrier Springbank: your questions answered

Does my basement development in Springbank need a vapour barrier?
Almost always, yes — exterior basement walls in our climate need a barrier on the warm side of the insulation before drywall. We confirm what your specific assembly needs on the site visit rather than guessing from the plan.
Which side of the insulation does the poly go on in a Springbank home?
The warm side — the side facing into the heated room. It is the detail that gets reversed most often, and it is not correctable once the wall is boarded.
Do you seal the outlet boxes and vents in Springbank?
Yes — every outlet, switch box, vent and pipe penetration gets sealed individually. Poly hung over open boxes looks finished and does not work.
Do I still need a vapour barrier in Springbank if I have spray foam?
Sometimes not — some spray foam assemblies act as their own barrier, and adding poly over them can be the wrong call. It depends on the product and the thickness, so we confirm on site instead of assuming.
Can you do the vapour barrier and the drywall together in Springbank?
Yes — insulation, vapour barrier and boarding as one job is the most common way we do it, and it means one crew is responsible for what ends up behind the wall. We also cover Royal Oak, Edgemont, Hawkwood and every Calgary quadrant.
Emplastrum Drywall — Vapour Barrier Springbank | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Springbank Calgary — Taping, Mudding, Ceilings & Painting

We also serve nearby

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Other drywall services we do in Springbank

Drywall Tips & Guides — Springbank Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook