Do you install fire-rated drywall in Cedarbrae?

Yes — fire-rated drywall in Cedarbrae is part of our regular work, and we are usually booked within the week. We also cover Brentwood, Charleswood, Collingwood and every Calgary quadrant.

Where is fire-rated drywall required?

In Cedarbrae, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Cedarbrae project needs.

Will it pass inspection in Cedarbrae?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Cedarbrae separation passes inspection.

Can you finish the fire-rated board too?

Yes — the Cedarbrae assembly meets code and leaves paint-ready — compliant and good-looking.

Do you stand behind your fire-rated work in Cedarbrae?

Yes. We install to code and walk the Cedarbrae job with you, and if something is not right we come back and make it right.

We're renovating our Cedarbrae home and found rough drywall behind old cabinets — can you fix that?

Yes — that's a common find in homes this age. We patch and skim it flush with the rest of the wall so it's ready for new cabinetry, tile or paint.

Fire-Rated Drywall Cedarbrae Calgary

Fire-rated drywall in Cedarbrae, installed to code

Where code requires it in Cedarbrae, fire-rated board is mandatory: garage-to-house separations, suites and party walls take Type X in a rated assembly — for inspection and for safety. In Cedarbrae we install fire-rated drywall to code and finish it clean. Cedarbrae is an older NW Calgary community where settling cracks, aging texture and the occasional plaster repair come up, so fire-rated work here is common on garages and suites. We cover Cedarbrae, Brentwood, Charleswood, Collingwood and every Calgary quadrant, 7 days a week.

Type X fire-rated board to code in Cedarbrae
Garage-to-house firewall separations
Basement legal-suite fire separations
Party walls between units
Rated assemblies installed and sealed correctly
Cedarbrae coverage — we come to you
Finished clean and inspection-ready

What affects the cost of fire-rated drywall in Cedarbrae?

Area and assembly

The cost in Cedarbrae depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. In Cedarbrae, the required rating sets the assembly build-up — and Type X runs above standard board on cost. We price off the spec and a site look.

Passing inspection in Cedarbrae

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Cedarbrae project passes the first time.

Our Cedarbrae fire-rated drywall process, step by step

Right board, right build-up

In Cedarbrae we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The Cedarbrae deliverable: a separation that passes inspection, meets code and looks complete.

Fire-rated garages, suites and party walls in Cedarbrae

Garage firewalls

The most common fire-rated job in Cedarbrae is the garage-to-house separation — Type X board on the common wall and ceiling. Installed and finished to code.

Suites and party walls

Cedarbrae sees steady legal-suite and party-wall work. We build the rated separations these require. See our legal suite drywall page.

Common fire-rated situations in Cedarbrae

Cedarbrae homes at this age often have at least one prior renovation on record, so we check for old patch work before starting a new repair — matching into a previous patch takes a different approach than matching into the original wall. Free on-site quote, one fixed price, and work that holds up after.

Why Cedarbrae homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Cedarbrae we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Cedarbrae and every Calgary quadrant, 7 days a week. The Cedarbrae quote is free and the price fixed — clean site, backed workmanship. Not right in Cedarbrae? We come back and correct it.

How it works

Simple, clean, on schedule

Free quote

We come out, take a look, and give you a real price. No guessing after.

Book a day

We pick a date that works for you and show up when we say.

The work

We keep the dust down and tidy up before we head out.

Walk it with you

We don't pack up till you've looked it over and you're happy.

Reviews

Rated by Calgary homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is rated on Google by Calgary homeowners.

Read the reviews or leave your own after your project.

Read our reviews on Google

FAQ — Fire-Rated Drywall Cedarbrae

Fire-Rated Drywall Cedarbrae: your questions answered

Do you install fire-rated drywall in Cedarbrae?: Yes — fire-rated drywall in Cedarbrae is part of our regular work, and we are usually booked within the week. We also cover Brentwood, Charleswood, Collingwood and every Calgary quadrant.
Where is fire-rated drywall required?: In Cedarbrae, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Cedarbrae project needs.
Will it pass inspection in Cedarbrae?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Cedarbrae separation passes inspection.
Can you finish the fire-rated board too?: Yes — the Cedarbrae assembly meets code and leaves paint-ready — compliant and good-looking.
Do you stand behind your fire-rated work in Cedarbrae?: Yes. We install to code and walk the Cedarbrae job with you, and if something is not right we come back and make it right.
We're renovating our Cedarbrae home and found rough drywall behind old cabinets — can you fix that?: Yes — that's a common find in homes this age. We patch and skim it flush with the rest of the wall so it's ready for new cabinetry, tile or paint.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Cedarbrae

Fire-rated drywall in Cedarbrae, installed to code