Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Cedarbrae, sealed before the board goes on

Nothing else in a Cedarbrae build is this hidden and this unforgiving: after the drywall goes up, a tear in the sheet or an unsealed box is there permanently. In Cedarbrae we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Cedarbrae is an older SW Calgary community where settling cracks, aging texture and the occasional plaster repair come up, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Cedarbrae, Pine Creek, Alpine Park, Osprey Hill and every Calgary quadrant, 7 days a week.

What affects the cost of vapour barrier installation in Cedarbrae?

Area, penetrations and detailing

Vapour barrier cost in Cedarbrae depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Cedarbrae vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. In Cedarbrae we see everything from original finishes to recent renovations on the same block.

The side a vapour barrier belongs on in Cedarbrae -- and why there is no choice about it

The warm side, always

In Cedarbrae the barrier goes on the warm side of the insulation — the side facing into the heated Cedarbrae room. It is what keeps household moisture out of the Cedarbrae wall cavity, where it would condense on cold framing.

What goes wrong when it is reversed

Put the barrier on the cold side and it seals moisture into the assembly rather than out of it. It is one of the few mistakes in a Cedarbrae wall that cannot be corrected without opening the wall back up, which is exactly why we check every Cedarbrae job before anything is covered.

How we install and seal it in Cedarbrae

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Cedarbrae home. A Cedarbrae wall with poly up and boxes still open behind it has no working vapour barrier -- and it is the most frequent thing we find on jobs someone else began. Housing in Cedarbrae is mixed, which is why we look before we quote rather than after.

Common vapour barrier situations in Cedarbrae

In Cedarbrae, cedarbrae homes at this age often have at least one prior renovation on record, so we check for old patch work before starting a new repair — matching into a previous patch takes a different approach than matching into the original wall. Same trusted team, same process on every job — on-site quote, fixed price, no surprises.

Why Cedarbrae homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Cedarbrae.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Cedarbrae and every Calgary quadrant, 7 days a week. Quotes at your Cedarbrae property are free, with a fixed price before work begins. In Cedarbrae we see everything from original finishes to recent renovations on the same block.

Simple, clean, on schedule — Vapour Barrier Installation in Cedarbrae Calgary

1

Free quote

We come out to your Cedarbrae Calgary property, take a real look at the vapour barrier installation, and hand you a fixed price on the spot — no guessing, no vague ballpark.

2

Book a day

We book around you, not around our week. When the day comes the Cedarbrae Calgary crew is there at the agreed time, loaded for the vapour barrier installation.

3

The work

We work clean. The Cedarbrae Calgary property is masked off before the vapour barrier installation starts and put back the way we found it, finished to a paint-ready standard.

4

Walk it with you

The vapour barrier installation is not done when the tools are packed — it is done when you have walked it in Cedarbrae Calgary and told us it is right.

Rated by Calgary Homeowners

★ ★ ★ ★ ★

Cedarbrae Calgary homeowners come to Emplastrum Drywall for vapour barrier installation — repairs, restoration and a proper finish. Every review is a real one, left on Google by a Calgary customer.

Read the reviews, or leave your own after your vapour barrier installation project in Cedarbrae Calgary.

Read our reviews on Google

Vapour Barrier Cedarbrae: your questions answered

Does my basement development in Cedarbrae need a vapour barrier?
Yes in nearly every case. In this climate a Cedarbrae basement exterior wall needs a barrier on the warm side of the insulation before boarding. What your particular Cedarbrae assembly requires is established at the visit, not inferred from a drawing.
Which side of the insulation does the poly go on in a Cedarbrae home?
On the warm side, meaning the face turned toward the heated space in your Cedarbrae home. Of all the details on a Cedarbrae job this is the one most often got backwards, and boarding makes it permanent.
Do you seal the outlet boxes and vents in Cedarbrae?
Yes. In a Cedarbrae home each outlet, switch box, vent and pipe penetration is sealed on its own. In a Cedarbrae home, poly draped over open boxes has the appearance of a finished job and none of the function.
Do I still need a vapour barrier in Cedarbrae if I have spray foam?
Not always. Certain spray foam assemblies are their own barrier, and putting poly over one in a Cedarbrae home can be a mistake. Product and thickness decide it, which is why we check at the Cedarbrae property rather than assume.
Can you do the vapour barrier and the drywall together in Cedarbrae?
Yes. On most Cedarbrae jobs we do insulation, barrier and boarding together, so a single crew answers for what is behind the wall. We also cover Pine Creek, Alpine Park, Osprey Hill and every Calgary quadrant.
Emplastrum Drywall — Vapour Barrier Cedarbrae | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Cedarbrae Calgary — Taping, Mudding, Ceilings & Painting

We cover Cedarbrae Calgary as part of our wider Vapour Barrier Installation Calgary service, across SW Calgary — see every neighbourhood we work in, or talk to your drywall contractor in Calgary.

We also serve nearby

Other services in Calgary

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Poly-B repair, drywall & painting in Cedarbrae Calgary

Poly first, then board — see Basement Drywall Cedarbrae Calgary.

Insulation not in yet? Start at Insulation Installation Cedarbrae Calgary.

Other jobs we take on in Cedarbrae

Drywall Tips & Guides — Cedarbrae Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook