Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Brentwood, sealed before the board goes on

A vapour barrier is one of the few things in a build that is completely hidden and completely unforgiving — once the drywall is on, a torn sheet or an unsealed outlet box stays that way for the life of the wall. In Brentwood we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Brentwood is an established NW Calgary community of 1960s-70s homes and infills, with plaster, stipple and settling-crack work common, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Brentwood, Glacier Ridge, Medicine Hill, Haskayne and every Calgary quadrant, 7 days a week.

Vapour Barrier Brentwood

Watch vapour barrier installation jobs in Brentwood Calgary on our YouTube channel

What affects the cost of vapour barrier installation in Brentwood?

Area, penetrations and detailing

Vapour barrier cost in Brentwood depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Brentwood vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. Stipple ceilings turn up throughout Brentwood, often with several layers from past repairs.

Which side the vapour barrier goes on, and why that is not optional

The warm side, always

In Brentwood the barrier goes on the warm side of the insulation — the side facing into the heated Brentwood room. That is what stops indoor moisture from travelling into the wall cavity and condensing when it reaches cold framing.

What goes wrong when it is reversed

A barrier installed on the cold side traps moisture inside the assembly instead of keeping it out. It is one of the few mistakes in a Brentwood wall that cannot be corrected without opening the wall back up, which is exactly why we check every Brentwood job before anything is covered. Stipple ceilings turn up throughout Brentwood, often with several layers from past repairs.

How we install and seal it in Brentwood

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Brentwood home. Poly on the walls with open boxes behind it is not a working vapour barrier, and it is the single most common thing we find on jobs that were started by someone else.

Common vapour barrier situations in Brentwood

Brentwood's original stipple has usually been painted over more than once by now, which changes how it catches light — we account for that when matching texture, not just the pattern itself but how decades of paint have softened it. Free on-site quote, one fixed price, and work that holds up after.

Why Brentwood homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Brentwood.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Brentwood and every Calgary quadrant, 7 days a week. Free on-site quotes and a fixed price before any work starts. Where Brentwood still has stipple, we check how many coats are on it before deciding to match or remove.

Simple, clean, on schedule — Vapour Barrier Installation in Brentwood Calgary

1

Free quote

Before anything is priced we walk the vapour barrier installation with you at the Brentwood Calgary property. You get a fixed figure that day, not a range that moves later.

2

Book a day

You choose the date. Once the Brentwood Calgary job is in the calendar the crew arrives that morning with everything the vapour barrier installation needs.

3

The work

Dust control is set up first — sheeting, sealed openings, containment — then the vapour barrier installation is taken through to a paint-ready finish in your Brentwood Calgary home.

4

Walk it with you

The last step is you inspecting the vapour barrier installation yourself. Anything you point out at the Brentwood Calgary property gets handled before the crew leaves.

Rated by Calgary Homeowners

For vapour barrier installation in Brentwood Calgary, Emplastrum Drywall handles the repair, the restoration and the finish. What Calgary homeowners think of that work is on our Google profile.

Read the reviews, or leave your own after your vapour barrier installation project in Brentwood Calgary.

Read our reviews on Google

What vapour barrier installation usually involves in Brentwood

Housing in Brentwood is mixed enough that two jobs on the same street can need completely different vapour barrier installation work.

Stipple ceilings turn up throughout Brentwood, often with more than one layer from earlier repairs, and each layer changes how the new work has to be feathered.

Vapour Barrier Brentwood: your questions answered

Does my basement development in Brentwood need a vapour barrier?
Almost always, yes — exterior basement walls in our climate need a barrier on the warm side of the insulation before drywall. We confirm what your specific assembly needs on the site visit rather than guessing from the plan.
Which side of the insulation does the poly go on in a Brentwood home?
The warm side — the side facing into the heated room. It is the detail that gets reversed most often, and it is not correctable once the wall is boarded.
Do you seal the outlet boxes and vents in Brentwood?
Yes — every outlet, switch box, vent and pipe penetration gets sealed individually. Poly hung over open boxes looks finished and does not work.
Do I still need a vapour barrier in Brentwood if I have spray foam?
Sometimes not — some spray foam assemblies act as their own barrier, and adding poly over them can be the wrong call. It depends on the product and the thickness, so we confirm on site instead of assuming.
Can you do the vapour barrier and the drywall together in Brentwood?
Yes — insulation, vapour barrier and boarding as one job is the most common way we do it, and it means one crew is responsible for what ends up behind the wall. We also cover Glacier Ridge, Medicine Hill, Haskayne and every Calgary quadrant.
Our Brentwood ceiling cracks along the same line every winter — why?
That's typically truss uplift — the roof trusses lift slightly in cold, dry months and open a crack at the ceiling/wall joint. We repair it and can finish it so it's far less likely to telegraph back.
Emplastrum Drywall — Vapour Barrier Brentwood | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Brentwood Calgary — Taping, Mudding, Ceilings & Painting

We also serve nearby

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

What else we can do while we are in Brentwood

Drywall Tips & Guides — Brentwood Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook