Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Crescent Heights, sealed before the board goes on

Few parts of a Crescent Heights build are as completely concealed, or as unforgiving, as the vapour barrier; once boarded, a torn sheet or unsealed box is permanent. In Crescent Heights we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Crescent Heights is an older NE Calgary community where settling cracks, aging texture and the occasional plaster repair come up, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Crescent Heights, Homestead, Moraine, Twinhills and every Calgary quadrant, 7 days a week.

What affects the cost of vapour barrier installation in Crescent Heights?

Area, penetrations and detailing

Vapour barrier cost in Crescent Heights depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Crescent Heights vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. In older Crescent Heights houses it is worth knowing whether there is lath behind the wall before anything is cut.

Vapour barrier placement in a Crescent Heights home, and why it is not negotiable

The warm side, always

In Crescent Heights the barrier goes on the warm side of the insulation — the side facing into the heated Crescent Heights room. That is how indoor moisture is prevented from moving into a Crescent Heights cavity and condensing on cold framing.

What goes wrong when it is reversed

Installed cold-side, the barrier traps moisture within the assembly rather than keeping it out. It is one of the few mistakes in a Crescent Heights wall that cannot be corrected without opening the wall back up, which is exactly why we check every Crescent Heights job before anything is covered. Infill construction in Crescent Heights means new-build finishing and old-house repair often run on the same block.

How we install and seal it in Crescent Heights

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Crescent Heights home. Where poly is on the walls but the boxes behind are open, the barrier does not work; it is the commonest fault we find on part-finished Crescent Heights jobs.

Common vapour barrier situations in Crescent Heights

In Crescent Heights, crescent Heights is one of the area's older, character neighbourhoods, so the work here runs to genuine plaster repair, taking down dated textured ceilings, and patching into original lath-and-plaster surfaces so a repair disappears. Where owners are renovating or building infills, we also handle full new-construction boarding and finishing. We handle all of it the same careful way — on-site quote, fixed price, done right.

Why Crescent Heights homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Crescent Heights.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Crescent Heights and every Calgary quadrant, 7 days a week. On-site quoting in Crescent Heights costs nothing, and the price is set before anything starts. Some Crescent Heights homes are plaster rather than drywall behind the paint, which changes the repair entirely.

Simple, clean, on schedule — Vapour Barrier Installation in Crescent Heights Calgary

1

Free quote

The quote happens at your Crescent Heights Calgary home, in front of the work. We measure, we look at what is behind the wall where it matters, and the price we give is the price.

2

Book a day

You choose the date. Once the Crescent Heights Calgary job is in the calendar the crew arrives that morning with everything the vapour barrier installation needs.

3

The work

The vapour barrier installation is done in a protected work area. Furniture and floors in the Crescent Heights Calgary home are covered, and nothing is left for you to clean up at the end of the day.

4

Walk it with you

You sign off, not us. We go through the completed vapour barrier installation with you at the Crescent Heights Calgary home and fix anything that is not right that day.

Rated by Calgary Homeowners

★ ★ ★ ★ ★

Crescent Heights Calgary homeowners come to Emplastrum Drywall for vapour barrier installation — repairs, restoration and a proper finish. Every review is a real one, left on Google by a Calgary customer.

Read what other people said, then tell us how we did on your own vapour barrier installation job in Crescent Heights Calgary.

Read our reviews on Google

Crescent Heights: what shapes the job

Housing in Crescent Heights is mixed enough that two jobs on the same street can need completely different vapour barrier installation work.

Infill construction in Crescent Heights means new-build finishing and old-house repair often run on the same street.

In older Crescent Heights houses it is worth knowing whether there is lath behind the wall before anything is opened up.

Vapour Barrier Crescent Heights: your questions answered

Does my basement development in Crescent Heights need a vapour barrier?
Yes, essentially always -- our climate means a Crescent Heights exterior basement wall gets a barrier on the warm side of the insulation before drywall goes on. The requirement for your Crescent Heights assembly is confirmed in person on the visit, not guessed from the plan.
Which side of the insulation does the poly go on in a Crescent Heights home?
The warm side of the assembly -- the one looking into the heated Crescent Heights room. More than anything else on a Crescent Heights job this gets reversed, and it cannot be corrected after boarding.
Do you seal the outlet boxes and vents in Crescent Heights?
Yes -- each and every outlet, switch box, vent and pipe going through a Crescent Heights wall is sealed on its own. Hanging poly over open boxes in Crescent Heights framing gives you the look of a finished barrier without the performance.
Do I still need a vapour barrier in Crescent Heights if I have spray foam?
Sometimes it should not go on at all -- some spray foam assemblies in Crescent Heights homes are already the barrier, and poly over them is the wrong move. It varies with product and thickness, so we verify it on site in Crescent Heights instead of assuming.
Can you do the vapour barrier and the drywall together in Crescent Heights?
Yes -- running insulation, barrier and boarding as a single Crescent Heights job is our usual approach, and it puts one crew on the hook for what ends up in the wall. We also cover Homestead, Moraine, Twinhills and every Calgary quadrant.
Emplastrum Drywall — Vapour Barrier Crescent Heights | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Crescent Heights Calgary — Taping, Mudding, Ceilings & Painting

We cover Crescent Heights Calgary as part of our wider Vapour Barrier Installation Calgary service, across NE Calgary — see every neighbourhood we work in, or talk to your drywall contractor in Calgary.

We also serve nearby

Other services in Calgary

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Poly-B repair, drywall & painting in Crescent Heights Calgary

Poly first, then board — see Basement Drywall Crescent Heights Calgary.

Insulation not in yet? Start at Insulation Installation Crescent Heights Calgary.

The rest of what we do in Crescent Heights

Drywall Tips & Guides — Crescent Heights Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook