Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Haysboro, sealed before the board goes on

Few parts of a Haysboro build are as completely concealed, or as unforgiving, as the vapour barrier; once boarded, a torn sheet or unsealed box is permanent. In Haysboro we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Haysboro is an older SW Calgary community where settling cracks, aging texture and the occasional plaster repair come up, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Haysboro, Pine Creek, Alpine Park, Osprey Hill and every Calgary quadrant, 7 days a week.

What affects the cost of vapour barrier installation in Haysboro?

Area, penetrations and detailing

Vapour barrier cost in Haysboro depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Haysboro vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. In Haysboro we see everything from original finishes to recent renovations on the same block.

Vapour barrier placement in a Haysboro home, and why it is not negotiable

The warm side, always

In Haysboro the barrier goes on the warm side of the insulation — the side facing into the heated Haysboro room. That is how indoor moisture is prevented from moving into a Haysboro cavity and condensing on cold framing.

What goes wrong when it is reversed

Installed cold-side, the barrier traps moisture within the assembly rather than keeping it out. It is one of the few mistakes in a Haysboro wall that cannot be corrected without opening the wall back up, which is exactly why we check every Haysboro job before anything is covered. In Haysboro we see everything from original finishes to recent renovations on the same block.

How we install and seal it in Haysboro

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Haysboro home. Where poly is on the walls but the boxes behind are open, the barrier does not work; it is the commonest fault we find on part-finished Haysboro jobs.

Common vapour barrier situations in Haysboro

In Haysboro, haysboro has some of the oldest housing stock we work in, so ceiling and cornice details here can be genuinely unusual — we match what is actually there rather than defaulting to a modern flat finish that would look out of place. Free on-site quote, one fixed price, and work that holds up after.

Why Haysboro homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Haysboro.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Haysboro and every Calgary quadrant, 7 days a week. On-site quoting in Haysboro costs nothing, and the price is set before anything starts. Haysboro spans a range of build eras, so what is behind the wall differs street to street.

Simple, clean, on schedule — Vapour Barrier Installation in Haysboro Calgary

1

Free quote

The quote happens at your Haysboro Calgary home, in front of the work. We measure, we look at what is behind the wall where it matters, and the price we give is the price.

2

Book a day

Scheduling is settled in one conversation. The vapour barrier installation start date in Haysboro Calgary is confirmed and the team turns up on it.

3

The work

Dust control is set up first — sheeting, sealed openings, containment — then the vapour barrier installation is taken through to a paint-ready finish in your Haysboro Calgary home.

4

Walk it with you

Before we call the Haysboro Calgary job finished we walk it together under proper light. If a spot needs another pass, it gets one.

Rated by Calgary Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall does vapour barrier installation in Haysboro Calgary — patches, restoration and paint-ready finishing. The reviews come from Calgary homeowners on Google, not from us.

Go through them, then judge us on your own Haysboro Calgary project.

Read our reviews on Google

Vapour Barrier Haysboro: your questions answered

Does my basement development in Haysboro need a vapour barrier?
Yes, essentially always -- our climate means a Haysboro exterior basement wall gets a barrier on the warm side of the insulation before drywall goes on. The requirement for your Haysboro assembly is confirmed in person on the visit, not guessed from the plan.
Which side of the insulation does the poly go on in a Haysboro home?
The warm side of the assembly -- the one looking into the heated Haysboro room. More than anything else on a Haysboro job this gets reversed, and it cannot be corrected after boarding.
Do you seal the outlet boxes and vents in Haysboro?
Yes -- each and every outlet, switch box, vent and pipe going through a Haysboro wall is sealed on its own. Hanging poly over open boxes in Haysboro framing gives you the look of a finished barrier without the performance.
Do I still need a vapour barrier in Haysboro if I have spray foam?
Sometimes it should not go on at all -- some spray foam assemblies in Haysboro homes are already the barrier, and poly over them is the wrong move. It varies with product and thickness, so we verify it on site in Haysboro instead of assuming.
Can you do the vapour barrier and the drywall together in Haysboro?
Yes -- running insulation, barrier and boarding as a single Haysboro job is our usual approach, and it puts one crew on the hook for what ends up in the wall. We also cover Pine Creek, Alpine Park, Osprey Hill and every Calgary quadrant.
Emplastrum Drywall — Vapour Barrier Haysboro | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Haysboro Calgary — Taping, Mudding, Ceilings & Painting

We cover Haysboro Calgary as part of our wider Vapour Barrier Installation Calgary service, across SW Calgary — see every neighbourhood we work in, or talk to your drywall contractor in Calgary.

We also serve nearby

Other services in Calgary

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Poly-B repair, drywall & painting in Haysboro Calgary

Poly first, then board — see Basement Drywall Haysboro Calgary.

Insulation not in yet? Start at Insulation Installation Haysboro Calgary.

Other drywall services we do in Haysboro

Drywall Tips & Guides — Haysboro Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook