Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Saddlewood, sealed before the board goes on

A vapour barrier is one of the few things in a build that is completely hidden and completely unforgiving — once the drywall is on, a torn sheet or an unsealed outlet box stays that way for the life of the wall. In Saddlewood we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Saddlewood is a newer Cochrane community where finishing and basement work are common, so basement development insulation is the main call here, with the main floors already insulated to a recent code. We cover Saddlewood and all of Cochrane, 7 days a week.

Vapour Barrier Saddlewood

Watch vapour barrier installation jobs in Saddlewood Cochrane on our YouTube channel

What affects the cost of vapour barrier installation in Saddlewood?

Area, penetrations and detailing

Vapour barrier cost in Saddlewood depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Saddlewood vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. A lot of our Saddlewood work starts in the basement, where the ceiling has to stay openable for the plumbing above it.

Which side the vapour barrier goes on, and why that is not optional

The warm side, always

In Saddlewood the barrier goes on the warm side of the insulation — the side facing into the heated Saddlewood room. That is what stops indoor moisture from travelling into the wall cavity and condensing when it reaches cold framing.

What goes wrong when it is reversed

A barrier installed on the cold side traps moisture inside the assembly instead of keeping it out. It is one of the few mistakes in a Saddlewood wall that cannot be corrected without opening the wall back up, which is exactly why we check every Saddlewood job before anything is covered.

How we install and seal it in Saddlewood

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Saddlewood home. Poly on the walls with open boxes behind it is not a working vapour barrier, and it is the single most common thing we find on jobs that were started by someone else. A lot of our Saddlewood work starts in the basement, where the ceiling has to stay openable for the plumbing above it.

Common vapour barrier situations in Saddlewood

Drywall repair and finishing in Saddlewood is handled the same careful way on every job. We repair holes, stress cracks, nail pops and water stains, then texture-match so the fix disappears. We board, tape, mud and finish basements to a smooth, paint-ready Level 4 or 5. Free on-site quotes, and a real fixed price with no guessing after. We handle all of it the same careful way — on-site quote, fixed price, done right.

Why Saddlewood homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Saddlewood.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Saddlewood and all of Cochrane, 7 days a week. Free on-site quotes and a fixed price before any work starts. In Saddlewood basements the deciding detail is usually access: what has to stay reachable once the ceiling is closed up.

Simple, clean, on schedule — Vapour Barrier Installation in Saddlewood Cochrane

1

Free quote

We come out to your Saddlewood Cochrane property, take a real look at the vapour barrier installation, and hand you a fixed price on the spot — no guessing, no vague ballpark.

2

Book a day

We book around you, not around our week. When the day comes the Saddlewood Cochrane crew is there at the agreed time, loaded for the vapour barrier installation.

3

The work

We work clean. The Saddlewood Cochrane property is masked off before the vapour barrier installation starts and put back the way we found it, finished to a paint-ready standard.

4

Walk it with you

We don't pack up till you've walked the finished vapour barrier installation with us and you're happy with the result in Saddlewood Cochrane.

Rated by Cochrane Homeowners

Emplastrum Drywall does vapour barrier installation in Saddlewood Cochrane — patches, restoration and paint-ready finishing. The reviews come from Cochrane homeowners on Google, not from us.

Go through them, then judge us on your own Saddlewood Cochrane project.

Read our reviews on Google

How Saddlewood homes affect the work

Saddlewood spans a range of build eras, so what is behind the wall genuinely differs street to street — which is why we look before quoting the vapour barrier installation rather than after.

Basements in Saddlewood run cooler and damper than the rest of the house, and that affects both the board choice and how long each coat needs.

Vapour Barrier Saddlewood: your questions answered

Does my basement development in Saddlewood need a vapour barrier?
Almost always, yes — exterior basement walls in our climate need a barrier on the warm side of the insulation before drywall. We confirm what your specific assembly needs on the site visit rather than guessing from the plan.
Which side of the insulation does the poly go on in a Saddlewood home?
The warm side — the side facing into the heated room. It is the detail that gets reversed most often, and it is not correctable once the wall is boarded.
Do you seal the outlet boxes and vents in Saddlewood?
Yes — every outlet, switch box, vent and pipe penetration gets sealed individually. Poly hung over open boxes looks finished and does not work.
Do I still need a vapour barrier in Saddlewood if I have spray foam?
Sometimes not — some spray foam assemblies act as their own barrier, and adding poly over them can be the wrong call. It depends on the product and the thickness, so we confirm on site instead of assuming.
Can you do the vapour barrier and the drywall together in Saddlewood?
Yes — insulation, vapour barrier and boarding as one job is the most common way we do it, and it means one crew is responsible for what ends up behind the wall. We also cover Cochrane, Sunset Ridge, Heritage Hills and the Cochrane area.
Can you match the existing texture after a repair in Saddlewood?
Yes — texture matching is core to what we do. We recreate the surrounding stipple, knockdown or hand-texture so a patch blends into the original wall or ceiling seamlessly.
Emplastrum Drywall — Vapour Barrier Saddlewood | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Saddlewood Cochrane — Taping, Mudding, Ceilings & Painting

We also serve nearby

Need Cochrane’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Cochrane →

Other jobs we take on in Saddlewood

Drywall Tips & Guides — Saddlewood Cochrane

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook