Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in St. Andrews Heights, sealed before the board goes on

A vapour barrier is one of the few things in a build that is completely hidden and completely unforgiving — once the drywall is on, a torn sheet or an unsealed outlet box stays that way for the life of the wall. In St. Andrews Heights we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. St. Andrews Heights is an older NW Calgary community where settling cracks, aging texture and the occasional plaster repair come up, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover St. Andrews Heights, Glacier Ridge, Medicine Hill, Haskayne and every Calgary quadrant, 7 days a week.

Vapour Barrier St. Andrews Heights

Watch vapour barrier installation jobs in St Andrews Heights Calgary on our YouTube channel

What affects the cost of vapour barrier installation in St. Andrews Heights in Calgary?

Area, penetrations and detailing

Vapour barrier cost in St. Andrews Heights depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most St. Andrews Heights vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit.

Which side the vapour barrier goes on, and why that is not optional

The warm side, always

In St. Andrews Heights the barrier goes on the warm side of the insulation — the side facing into the heated St. Andrews Heights room. That is what stops indoor moisture from travelling into the wall cavity and condensing when it reaches cold framing.

What goes wrong when it is reversed

A barrier installed on the cold side traps moisture inside the assembly instead of keeping it out. It is one of the few mistakes in a St. Andrews Heights wall that cannot be corrected without opening the wall back up, which is exactly why we check every St. Andrews Heights job before anything is covered. St. Andrews Heights spans a range of build eras, so what is behind the wall differs street to street.

How we install and seal it in St. Andrews Heights

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your St. Andrews Heights home. Poly on the walls with open boxes behind it is not a working vapour barrier, and it is the single most common thing we find on jobs that were started by someone else. St. Andrews Heights spans a range of build eras, so what is behind the wall differs street to street.

Common vapour barrier situations in St. Andrews Heights

Renovations in St Andrews Heights regularly turn up surprises behind the walls — old wiring chases, filled-in doorways, mismatched patch jobs from decades past — and we work around all of it rather than assuming a clean, modern wall cavity. Assessed on site, priced up front, and finished properly — every time.

Why St. Andrews Heights homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in St. Andrews Heights.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover St. Andrews Heights and every Calgary quadrant, 7 days a week. Free on-site quotes and a fixed price before any work starts.

Simple, clean, on schedule — Vapour Barrier Installation in St Andrews Heights Calgary

1

Free quote

Before anything is priced we walk the vapour barrier installation with you at the St Andrews Heights Calgary property. You get a fixed figure that day, not a range that moves later.

2

Book a day

You choose the date. Once the St Andrews Heights Calgary job is in the calendar the crew arrives that morning with everything the vapour barrier installation needs.

3

The work

Dust control is set up first — sheeting, sealed openings, containment — then the vapour barrier installation is taken through to a paint-ready finish in your St Andrews Heights Calgary home.

4

Walk it with you

The last step is you inspecting the vapour barrier installation yourself. Anything you point out at the St Andrews Heights Calgary property gets handled before the crew leaves.

Rated by Calgary Homeowners

Emplastrum Drywall is the vapour barrier installation contractor St Andrews Heights Calgary trusts for repair, restoration and finishing — rated on Google by Calgary homeowners.

Go through them, then judge us on your own St Andrews Heights Calgary project.

Read our reviews on Google

Vapour Barrier St. Andrews Heights: your questions answered

Does my basement development in St. Andrews Heights need a vapour barrier?
Almost always, yes — exterior basement walls in our climate need a barrier on the warm side of the insulation before drywall. We confirm what your specific assembly needs on the site visit rather than guessing from the plan.
Which side of the insulation does the poly go on in a St. Andrews Heights home?
The warm side — the side facing into the heated room. It is the detail that gets reversed most often, and it is not correctable once the wall is boarded.
Do you seal the outlet boxes and vents in St. Andrews Heights?
Yes — every outlet, switch box, vent and pipe penetration gets sealed individually. Poly hung over open boxes looks finished and does not work.
Do I still need a vapour barrier in St. Andrews Heights if I have spray foam?
Sometimes not — some spray foam assemblies act as their own barrier, and adding poly over them can be the wrong call. It depends on the product and the thickness, so we confirm on site instead of assuming.
Can you do the vapour barrier and the drywall together in St. Andrews Heights?
Yes — insulation, vapour barrier and boarding as one job is the most common way we do it, and it means one crew is responsible for what ends up behind the wall. We also cover Glacier Ridge, Medicine Hill, Haskayne and every Calgary quadrant.
Is it worth keeping the original plaster in our St Andrews Heights character home, or should we just replace it with drywall?
Depends on the damage — small areas are usually cheaper and more true-to-character to repair in place; if a whole wall is failing, replacing with drywall and matching the surrounding texture is often the better long-term call. We'll tell you honestly which applies.
Emplastrum Drywall — Vapour Barrier St. Andrews Heights | Taping, Mudding, Ceilings & Painting

Other Drywall Services in St Andrews Heights Calgary — Taping, Mudding, Ceilings & Painting

We also serve nearby

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Other drywall services we do in St. Andrews Heights

Drywall Tips & Guides — St Andrews Heights Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook