Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in West Springs, sealed before the board goes on

Few parts of a West Springs build are as completely concealed, or as unforgiving, as the vapour barrier; once boarded, a torn sheet or unsealed box is permanent. In West Springs we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. West Springs is one of SW Calgary's newer communities, where fresh installation and first-year settling work are common, so insulation calls here are usually limited to basement development, since the main floors are already insulated to current code. We cover West Springs, Pine Creek, Alpine Park, Osprey Hill and every Calgary quadrant, 7 days a week.

What affects the cost of vapour barrier installation in West Springs?

Area, penetrations and detailing

Vapour barrier cost in West Springs depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most West Springs vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit.

Vapour barrier placement in a West Springs home, and why it is not negotiable

The warm side, always

In West Springs the barrier goes on the warm side of the insulation — the side facing into the heated West Springs room. That is how indoor moisture is prevented from moving into a West Springs cavity and condensing on cold framing.

What goes wrong when it is reversed

Installed cold-side, the barrier traps moisture within the assembly rather than keeping it out. It is one of the few mistakes in a West Springs wall that cannot be corrected without opening the wall back up, which is exactly why we check every West Springs job before anything is covered. Because West Springs is largely new construction, the board is still settling and hairline cracking at corners is the normal first-year complaint.

How we install and seal it in West Springs

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your West Springs home. Where poly is on the walls but the boxes behind are open, the barrier does not work; it is the commonest fault we find on part-finished West Springs jobs. Basement development is common in West Springs, and a basement behaves differently from the rest of the house — cooler, damper, and less forgiving of a rushed finish.

Common vapour barrier situations in West Springs

In West Springs, west Springs is a community still building out. Homes there are current-build, so ceilings are typically knockdown and the work is new-build boarding and taping, basement development, and the first-season movement that shows up as a house dries out. That is the standard on every job here, big or small — on-site quote, fixed price.

Why West Springs homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in West Springs.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover West Springs and every Calgary quadrant, 7 days a week. On-site quoting in West Springs costs nothing, and the price is set before anything starts.

Simple, clean, on schedule — Vapour Barrier Installation in West Springs Calgary

1

Free quote

The quote happens at your West Springs Calgary home, in front of the work. We measure, we look at what is behind the wall where it matters, and the price we give is the price.

2

Book a day

We book around you, not around our week. When the day comes the West Springs Calgary crew is there at the agreed time, loaded for the vapour barrier installation.

3

The work

We keep the dust under control and protect your West Springs Calgary home while we finish the vapour barrier installation to a clean, paint-ready standard.

4

Walk it with you

Before we call the West Springs Calgary job finished we walk it together under proper light. If a spot needs another pass, it gets one.

Rated by Calgary Homeowners

★ ★ ★ ★ ★

West Springs Calgary homeowners come to Emplastrum Drywall for vapour barrier installation — repairs, restoration and a proper finish. Every review is a real one, left on Google by a Calgary customer.

Go through them, then judge us on your own West Springs Calgary project.

Read our reviews on Google

What we tend to find in West Springs

In a newly built West Springs home the drywall has not yet been through a full winter, so we plan the vapour barrier installation around settling that is still happening rather than settling that has finished.

Basements in West Springs run cooler and damper than the rest of the house, and that affects both the board choice and how long each coat needs.

In West Springs we are often the second trade to look at a wall, so the first question is what the original finish actually was.

Vapour Barrier West Springs: your questions answered

Does my basement development in West Springs need a vapour barrier?
Yes, essentially always -- our climate means a West Springs exterior basement wall gets a barrier on the warm side of the insulation before drywall goes on. The requirement for your West Springs assembly is confirmed in person on the visit, not guessed from the plan.
Which side of the insulation does the poly go on in a West Springs home?
The warm side of the assembly -- the one looking into the heated West Springs room. More than anything else on a West Springs job this gets reversed, and it cannot be corrected after boarding.
Do you seal the outlet boxes and vents in West Springs?
Yes -- each and every outlet, switch box, vent and pipe going through a West Springs wall is sealed on its own. Hanging poly over open boxes in West Springs framing gives you the look of a finished barrier without the performance.
Do I still need a vapour barrier in West Springs if I have spray foam?
Sometimes it should not go on at all -- some spray foam assemblies in West Springs homes are already the barrier, and poly over them is the wrong move. It varies with product and thickness, so we verify it on site in West Springs instead of assuming.
Can you do the vapour barrier and the drywall together in West Springs?
Yes -- running insulation, barrier and boarding as a single West Springs job is our usual approach, and it puts one crew on the hook for what ends up in the wall. We also cover Pine Creek, Alpine Park, Osprey Hill and every Calgary quadrant.
Emplastrum Drywall — Vapour Barrier West Springs | Taping, Mudding, Ceilings & Painting

Other Drywall Services in West Springs Calgary — Taping, Mudding, Ceilings & Painting

We cover West Springs Calgary as part of our wider Vapour Barrier Installation Calgary service, across SW Calgary — see every neighbourhood we work in, or talk to your drywall contractor in Calgary.

We also serve nearby

Other services in Calgary

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Poly-B repair, drywall & painting in West Springs Calgary

Poly first, then board — see Basement Drywall West Springs Calgary.

Insulation not in yet? Start at Insulation Installation West Springs Calgary.

Other jobs we take on in West Springs

Drywall Tips & Guides — West Springs Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook