Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Westmere, sealed before the board goes on

In a Westmere home the vapour barrier is invisible and unforgiving in equal measure -- board over a torn sheet or an open outlet box and it stays that way for the life of the wall. In Westmere we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Westmere is a growing Chestermere lake-community where fresh installation and first-year settling work are common, so basement development insulation is the main call here, with the main floors already insulated to a recent code. We cover Westmere and all of Chestermere, 7 days a week.

What affects the cost of vapour barrier installation in Westmere?

Area, penetrations and detailing

Vapour barrier cost in Westmere depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Westmere vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit.

Where the vapour barrier goes in a Westmere wall, and why it is not a preference

The warm side, always

In Westmere the barrier goes on the warm side of the insulation — the side facing into the heated Westmere room. Its job in a Westmere wall is to stop indoor moisture reaching the cavity and condensing against cold framing.

What goes wrong when it is reversed

On the cold side, a barrier holds moisture inside the assembly instead of excluding it. It is one of the few mistakes in a Westmere wall that cannot be corrected without opening the wall back up, which is exactly why we check every Westmere job before anything is covered. Westmere spans a range of build eras, so what is behind the wall differs street to street.

How we install and seal it in Westmere

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Westmere home. Poly over open boxes does not make a functioning barrier, and on Westmere jobs started by others it is the number one thing we come across. Westmere spans a range of build eras, so what is behind the wall differs street to street.

Common vapour barrier situations in Westmere

In Westmere, in Westmere we cover the full range of drywall work. We patch, texture-match, prime and paint in one visit so the wall looks completely finished. We replace water-damaged drywall, fix stained ceilings and blend the texture invisibly, with insurance photos. Book a free on-site quote seven days a week. One fixed price after an honest on-site look, and the job done right the first time.

Why Westmere homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Westmere.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Westmere and all of Chestermere, 7 days a week. We quote Westmere jobs on site at no charge and fix the price before starting.

Simple, clean, on schedule — Vapour Barrier Installation in Westmere Chestermere

1

Free quote

Before anything is priced we walk the vapour barrier installation with you at the Westmere Chestermere property. You get a fixed figure that day, not a range that moves later.

2

Book a day

One date, agreed and kept. The vapour barrier installation in Westmere Chestermere starts when we said it would, with the right materials already on the truck.

3

The work

Floors get covered and doorways sealed before the vapour barrier installation begins. Your Westmere Chestermere home stays liveable while we work, and the site is tidied each day.

4

Walk it with you

You sign off, not us. We go through the completed vapour barrier installation with you at the Westmere Chestermere home and fix anything that is not right that day.

Rated by Chestermere Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall does vapour barrier installation in Westmere Chestermere — patches, restoration and paint-ready finishing. The reviews come from Chestermere homeowners on Google, not from us.

Have a look through them before you decide — and leave one yourself once your Westmere Chestermere job is done.

Read our reviews on Google

Vapour Barrier Westmere: your questions answered

Does my basement development in Westmere need a vapour barrier?
Almost without exception, yes: exterior basement walls in Westmere require a barrier on the warm side of the insulation ahead of the drywall. Rather than reading it off the plan, we confirm on site in Westmere what that specific assembly needs.
Which side of the insulation does the poly go on in a Westmere home?
It goes warm side, facing into the heated room of the Westmere property. This is the detail most commonly installed the wrong way round in Westmere, and once the wall is boarded there is no fixing it.
Do you seal the outlet boxes and vents in Westmere?
Yes, individually: every box, vent and pipe penetration in a Westmere wall is sealed separately. Poly run over open boxes looks complete on a Westmere wall but does nothing.
Do I still need a vapour barrier in Westmere if I have spray foam?
Occasionally no: where a Westmere assembly uses spray foam that acts as its own barrier, adding poly can be wrong. The answer turns on the product and its thickness -- confirmed at the Westmere home, not guessed.
Can you do the vapour barrier and the drywall together in Westmere?
Yes, and it is how most Westmere work runs: insulation, vapour barrier and drywall as one job, with one crew accountable for what is behind it. We also cover Kinniburgh, Chestermere Station, Rainbow Falls and the Chestermere area.
Emplastrum Drywall — Vapour Barrier Westmere | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Westmere Chestermere — Taping, Mudding, Ceilings & Painting

We cover Westmere Chestermere as part of our wider Vapour Barrier Installation Chestermere service, across Chestermere — see every neighbourhood we work in, or talk to your drywall contractor in Chestermere.

We also serve nearby

Other services in Chestermere

Need Chestermere’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Chestermere →

Poly-B repair, drywall & painting in Westmere Chestermere

Poly first, then board — see Basement Drywall Westmere Chestermere.

Insulation not in yet? Start at Insulation Installation Westmere Chestermere.

Other drywall services we do in Westmere

Drywall Tips & Guides — Westmere Chestermere

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook