Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Bankview, sealed before the board goes on

In a Bankview home the vapour barrier is invisible and unforgiving in equal measure -- board over a torn sheet or an open outlet box and it stays that way for the life of the wall. In Bankview we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Bankview is an older SW Calgary community where settling cracks, aging texture and the occasional plaster repair come up, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Bankview, Pine Creek, Alpine Park, Osprey Hill and every Calgary quadrant, 7 days a week.

What affects the cost of vapour barrier installation in Bankview?

Area, penetrations and detailing

Vapour barrier cost in Bankview depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Bankview vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. In Bankview we see everything from original finishes to recent renovations on the same block.

Where the vapour barrier goes in a Bankview wall, and why it is not a preference

The warm side, always

In Bankview the barrier goes on the warm side of the insulation — the side facing into the heated Bankview room. Its job in a Bankview wall is to stop indoor moisture reaching the cavity and condensing against cold framing.

What goes wrong when it is reversed

On the cold side, a barrier holds moisture inside the assembly instead of excluding it. It is one of the few mistakes in a Bankview wall that cannot be corrected without opening the wall back up, which is exactly why we check every Bankview job before anything is covered.

How we install and seal it in Bankview

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Bankview home. Poly over open boxes does not make a functioning barrier, and on Bankview jobs started by others it is the number one thing we come across. Bankview spans a range of build eras, so what is behind the wall differs street to street.

Common vapour barrier situations in Bankview

In Bankview, character homes in Bankview tend to have settled unevenly over many decades, so wall and ceiling lines are rarely perfectly straight — we work with the house rather than fighting it, patching and skimming so repairs sit flush without chasing a plumb line the original build never had. Free on-site quote, one fixed price, and work that holds up after.

Why Bankview homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Bankview.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Bankview and every Calgary quadrant, 7 days a week. We quote Bankview jobs on site at no charge and fix the price before starting. In Bankview we see everything from original finishes to recent renovations on the same block.

Simple, clean, on schedule — Vapour Barrier Installation in Bankview Calgary

1

Free quote

We come out to your Bankview Calgary property, take a real look at the vapour barrier installation, and hand you a fixed price on the spot — no guessing, no vague ballpark.

2

Book a day

Scheduling is settled in one conversation. The vapour barrier installation start date in Bankview Calgary is confirmed and the team turns up on it.

3

The work

The vapour barrier installation is done in a protected work area. Furniture and floors in the Bankview Calgary home are covered, and nothing is left for you to clean up at the end of the day.

4

Walk it with you

The last step is you inspecting the vapour barrier installation yourself. Anything you point out at the Bankview Calgary property gets handled before the crew leaves.

Rated by Calgary Homeowners

★ ★ ★ ★ ★

Bankview Calgary homeowners come to Emplastrum Drywall for vapour barrier installation — repairs, restoration and a proper finish. Every review is a real one, left on Google by a Calgary customer.

Worth reading before you book. And once the vapour barrier installation work in Bankview Calgary is finished, we would appreciate yours.

Read our reviews on Google

Vapour Barrier Bankview: your questions answered

Does my basement development in Bankview need a vapour barrier?
Almost without exception, yes: exterior basement walls in Bankview require a barrier on the warm side of the insulation ahead of the drywall. Rather than reading it off the plan, we confirm on site in Bankview what that specific assembly needs.
Which side of the insulation does the poly go on in a Bankview home?
It goes warm side, facing into the heated room of the Bankview property. This is the detail most commonly installed the wrong way round in Bankview, and once the wall is boarded there is no fixing it.
Do you seal the outlet boxes and vents in Bankview?
Yes, individually: every box, vent and pipe penetration in a Bankview wall is sealed separately. Poly run over open boxes looks complete on a Bankview wall but does nothing.
Do I still need a vapour barrier in Bankview if I have spray foam?
Occasionally no: where a Bankview assembly uses spray foam that acts as its own barrier, adding poly can be wrong. The answer turns on the product and its thickness -- confirmed at the Bankview home, not guessed.
Can you do the vapour barrier and the drywall together in Bankview?
Yes, and it is how most Bankview work runs: insulation, vapour barrier and drywall as one job, with one crew accountable for what is behind it. We also cover Pine Creek, Alpine Park, Osprey Hill and every Calgary quadrant.
Emplastrum Drywall — Vapour Barrier Bankview | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Bankview Calgary — Taping, Mudding, Ceilings & Painting

We cover Bankview Calgary as part of our wider Vapour Barrier Installation Calgary service, across SW Calgary — see every neighbourhood we work in, or talk to your drywall contractor in Calgary.

We also serve nearby

Other services in Calgary

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Poly-B repair, drywall & painting in Bankview Calgary

Poly first, then board — see Basement Drywall Bankview Calgary.

Insulation not in yet? Start at Insulation Installation Bankview Calgary.

Other jobs we take on in Bankview

Drywall Tips & Guides — Bankview Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook