Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Olde Towne, sealed before the board goes on

In a Olde Towne home the vapour barrier is invisible and unforgiving in equal measure -- board over a torn sheet or an open outlet box and it stays that way for the life of the wall. In Olde Towne we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Olde Towne is Okotoks's historic core, where the housing stock is older, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Olde Towne, Central Heights, Cornerstone, Crystal Ridge and the Okotoks area, 7 days a week.

What affects the cost of vapour barrier installation in Olde Towne?

Area, penetrations and detailing

Vapour barrier cost in Olde Towne depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Olde Towne vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. Olde Towne spans a range of build eras, so what is behind the wall differs street to street.

Where the vapour barrier goes in a Olde Towne wall, and why it is not a preference

The warm side, always

In Olde Towne the barrier goes on the warm side of the insulation — the side facing into the heated Olde Towne room. Its job in a Olde Towne wall is to stop indoor moisture reaching the cavity and condensing against cold framing.

What goes wrong when it is reversed

On the cold side, a barrier holds moisture inside the assembly instead of excluding it. It is one of the few mistakes in a Olde Towne wall that cannot be corrected without opening the wall back up, which is exactly why we check every Olde Towne job before anything is covered. Housing in Olde Towne is mixed, which is why we look before we quote rather than after.

How we install and seal it in Olde Towne

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Olde Towne home. Poly over open boxes does not make a functioning barrier, and on Olde Towne jobs started by others it is the number one thing we come across. Olde Towne spans a range of build eras, so what is behind the wall differs street to street.

Common vapour barrier situations in Olde Towne

In Olde Towne, olde Towne is a residential neighbourhood in Okotoks. Build years vary across the neighbourhood, so rather than assume what is behind the wall we confirm it on site — the finish, the texture and how the existing surface has aged all change how the repair is approached. We handle all of it the same careful way — on-site quote, fixed price, done right.

Why Olde Towne homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Olde Towne.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Olde Towne and the Okotoks area, 7 days a week. We quote Olde Towne jobs on site at no charge and fix the price before starting. Housing in Olde Towne is mixed, which is why we look before we quote rather than after.

Simple, clean, on schedule — Vapour Barrier Installation in Olde Towne Okotoks

1

Free quote

A fixed price for the vapour barrier installation comes from seeing it in person at your Olde Towne Okotoks home — scope confirmed on site, then a number that does not change.

2

Book a day

One date, agreed and kept. The vapour barrier installation in Olde Towne Okotoks starts when we said it would, with the right materials already on the truck.

3

The work

Dust control is set up first — sheeting, sealed openings, containment — then the vapour barrier installation is taken through to a paint-ready finish in your Olde Towne Okotoks home.

4

Walk it with you

We don't pack up till you've walked the finished vapour barrier installation with us and you're happy with the result in Olde Towne Okotoks.

Rated by Okotoks Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the vapour barrier installation contractor Olde Towne Okotoks trusts for repair, restoration and finishing — rated on Google by Okotoks homeowners.

Read what other people said, then tell us how we did on your own vapour barrier installation job in Olde Towne Okotoks.

Read our reviews on Google

Vapour Barrier Olde Towne: your questions answered

Does my basement development in Olde Towne need a vapour barrier?
Almost without exception, yes: exterior basement walls in Olde Towne require a barrier on the warm side of the insulation ahead of the drywall. Rather than reading it off the plan, we confirm on site in Olde Towne what that specific assembly needs.
Which side of the insulation does the poly go on in a Olde Towne home?
It goes warm side, facing into the heated room of the Olde Towne property. This is the detail most commonly installed the wrong way round in Olde Towne, and once the wall is boarded there is no fixing it.
Do you seal the outlet boxes and vents in Olde Towne?
Yes, individually: every box, vent and pipe penetration in a Olde Towne wall is sealed separately. Poly run over open boxes looks complete on a Olde Towne wall but does nothing.
Do I still need a vapour barrier in Olde Towne if I have spray foam?
Occasionally no: where a Olde Towne assembly uses spray foam that acts as its own barrier, adding poly can be wrong. The answer turns on the product and its thickness -- confirmed at the Olde Towne home, not guessed.
Can you do the vapour barrier and the drywall together in Olde Towne?
Yes, and it is how most Olde Towne work runs: insulation, vapour barrier and drywall as one job, with one crew accountable for what is behind it. We also cover Central Heights, Cornerstone, Crystal Ridge and the Okotoks area.
Emplastrum Drywall — Vapour Barrier Olde Towne | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Olde Towne Okotoks — Taping, Mudding, Ceilings & Painting

We cover Olde Towne Okotoks as part of our wider Vapour Barrier Installation Okotoks service, across Okotoks — see every neighbourhood we work in, or talk to your drywall contractor in Okotoks.

We also serve nearby

Other services in Okotoks

Need Okotoks’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Okotoks →

Poly-B repair, drywall & painting in Olde Towne Okotoks

Poly first, then board — see Basement Drywall Olde Towne Okotoks.

Insulation not in yet? Start at Insulation Installation Olde Towne Okotoks.

What else we can do while we are in Olde Towne

Drywall Tips & Guides — Olde Towne Okotoks

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook