Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in South Point, sealed before the board goes on

A vapour barrier is one of the few things in a build that is completely hidden and completely unforgiving — once the drywall is on, a torn sheet or an unsealed outlet box stays that way for the life of the wall. In South Point we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. South Point is an Airdrie community with a mix of older homes and newer builds, so insulation calls here range from basement development in the newer homes to attic and wall upgrades in the older ones nearby. We cover South Point and all of Airdrie, 7 days a week.

Vapour Barrier South Point

Watch vapour barrier installation jobs in South Point Airdrie on our YouTube channel

What affects the cost of vapour barrier installation in South Point?

Area, penetrations and detailing

Vapour barrier cost in South Point depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most South Point vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. Basement development is common in South Point, and a basement behaves differently from the rest of the house — cooler, damper, and less forgiving of a rushed finish.

Which side the vapour barrier goes on, and why that is not optional

The warm side, always

In South Point the barrier goes on the warm side of the insulation — the side facing into the heated South Point room. That is what stops indoor moisture from travelling into the wall cavity and condensing when it reaches cold framing.

What goes wrong when it is reversed

A barrier installed on the cold side traps moisture inside the assembly instead of keeping it out. It is one of the few mistakes in a South Point wall that cannot be corrected without opening the wall back up, which is exactly why we check every South Point job before anything is covered.

How we install and seal it in South Point

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your South Point home. Poly on the walls with open boxes behind it is not a working vapour barrier, and it is the single most common thing we find on jobs that were started by someone else. Basement development is common in South Point, and a basement behaves differently from the rest of the house — cooler, damper, and less forgiving of a rushed finish.

Common vapour barrier situations in South Point

South Point is a family community on Airdrie's south side, and our most common jobs here are basement drywall for finishing projects, crack and nail-pop repair, and ceiling texture work after renovations or pot-light installs. Free on-site quote, one fixed price, and work that holds up after.

Why South Point homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in South Point.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover South Point and all of Airdrie, 7 days a week. Free on-site quotes and a fixed price before any work starts. Basement development is common in South Point, and a basement behaves differently from the rest of the house — cooler, damper, and less forgiving of a rushed finish.

Simple, clean, on schedule — Vapour Barrier Installation in South Point Airdrie

1

Free quote

The quote happens at your South Point Airdrie home, in front of the work. We measure, we look at what is behind the wall where it matters, and the price we give is the price.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the vapour barrier installation in South Point Airdrie. No back-and-forth rescheduling.

3

The work

We work clean. The South Point Airdrie property is masked off before the vapour barrier installation starts and put back the way we found it, finished to a paint-ready standard.

4

Walk it with you

The vapour barrier installation is not done when the tools are packed — it is done when you have walked it in South Point Airdrie and told us it is right.

Rated by Airdrie Homeowners

Homeowners in South Point Airdrie call Emplastrum Drywall for vapour barrier installation work, from a single patch through to a full restoration. Our reviews are on Google, written by Airdrie customers.

Read what other people said, then tell us how we did on your own vapour barrier installation job in South Point Airdrie.

Read our reviews on Google

How South Point homes affect the work

Housing in South Point is mixed enough that two jobs on the same street can need completely different vapour barrier installation work.

Basements in South Point run cooler and damper than the rest of the house, and that affects both the board choice and how long each coat needs.

Vapour Barrier South Point: your questions answered

Does my basement development in South Point need a vapour barrier?
Almost always, yes — exterior basement walls in our climate need a barrier on the warm side of the insulation before drywall. We confirm what your specific assembly needs on the site visit rather than guessing from the plan.
Which side of the insulation does the poly go on in a South Point home?
The warm side — the side facing into the heated room. It is the detail that gets reversed most often, and it is not correctable once the wall is boarded.
Do you seal the outlet boxes and vents in South Point?
Yes — every outlet, switch box, vent and pipe penetration gets sealed individually. Poly hung over open boxes looks finished and does not work.
Do I still need a vapour barrier in South Point if I have spray foam?
Sometimes not — some spray foam assemblies act as their own barrier, and adding poly over them can be the wrong call. It depends on the product and the thickness, so we confirm on site instead of assuming.
Can you do the vapour barrier and the drywall together in South Point?
Yes — insulation, vapour barrier and boarding as one job is the most common way we do it, and it means one crew is responsible for what ends up behind the wall. We also cover Bayside, Kings Heights, Coopers Crossing and the Airdrie area.
How long does a typical South Point basement drywall job take from board to paint-ready?
Most South Point basements run one to two weeks depending on size and finish level -- boarding and taping first, then mudding coats with drying time between, finishing at Level 4 or 5 and ready for your painter.
Emplastrum Drywall — Vapour Barrier South Point | Taping, Mudding, Ceilings & Painting

Other Drywall Services in South Point Airdrie — Taping, Mudding, Ceilings & Painting

We also serve nearby

Need Airdrie’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Airdrie →

Other jobs we take on in South Point

Drywall Tips & Guides — South Point Airdrie

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook