Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Redstone, sealed before the board goes on

A vapour barrier is one of the few things in a build that is completely hidden and completely unforgiving — once the drywall is on, a torn sheet or an unsealed outlet box stays that way for the life of the wall. In Redstone we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Redstone is one of NE Calgary's newer communities, where fresh installation and first-year settling work are common, so insulation calls here are usually limited to basement development, since the main floors are already insulated to current code. We cover Redstone, Homestead, Moraine, Twinhills and every Calgary quadrant, 7 days a week.

Vapour Barrier Redstone

Watch vapour barrier installation jobs in Redstone Calgary on our YouTube channel

What affects the cost of vapour barrier installation in Redstone?

Area, penetrations and detailing

Vapour barrier cost in Redstone depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Redstone vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit.

Which side the vapour barrier goes on, and why that is not optional

The warm side, always

In Redstone the barrier goes on the warm side of the insulation — the side facing into the heated Redstone room. That is what stops indoor moisture from travelling into the wall cavity and condensing when it reaches cold framing.

What goes wrong when it is reversed

A barrier installed on the cold side traps moisture inside the assembly instead of keeping it out. It is one of the few mistakes in a Redstone wall that cannot be corrected without opening the wall back up, which is exactly why we check every Redstone job before anything is covered. Basement development is common in Redstone, and a basement behaves differently from the rest of the house — cooler, damper, and less forgiving of a rushed finish.

How we install and seal it in Redstone

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Redstone home. Poly on the walls with open boxes behind it is not a working vapour barrier, and it is the single most common thing we find on jobs that were started by someone else. Most of Redstone went up recently enough that we are usually working against a builder's original finish rather than someone else's repair.

Common vapour barrier situations in Redstone

Redstone is a young community, so it's new-build work: first-year settling cracks and nail pops, basement development for first owners, and builder-grade walls upgraded to Level 5 — done clean in occupied, closely-spaced laned homes. We handle all of it the same careful way — on-site quote, fixed price, done right.

Why Redstone homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Redstone.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Redstone and every Calgary quadrant, 7 days a week. Free on-site quotes and a fixed price before any work starts.

Simple, clean, on schedule — Vapour Barrier Installation in Redstone Calgary

1

Free quote

We come out to your Redstone Calgary property, take a real look at the vapour barrier installation, and hand you a fixed price on the spot — no guessing, no vague ballpark.

2

Book a day

We book around you, not around our week. When the day comes the Redstone Calgary crew is there at the agreed time, loaded for the vapour barrier installation.

3

The work

Dust control is set up first — sheeting, sealed openings, containment — then the vapour barrier installation is taken through to a paint-ready finish in your Redstone Calgary home.

4

Walk it with you

Before we call the Redstone Calgary job finished we walk it together under proper light. If a spot needs another pass, it gets one.

Rated by Calgary Homeowners

For vapour barrier installation in Redstone Calgary, Emplastrum Drywall handles the repair, the restoration and the finish. What Calgary homeowners think of that work is on our Google profile.

Have a look through them before you decide — and leave one yourself once your Redstone Calgary job is done.

Read our reviews on Google

Redstone: what shapes the job

Redstone is recent enough that we are normally working with original, untouched surfaces — which makes matching straightforward and keeps the vapour barrier installation quicker than it would be in an older area.

A lot of the work in Redstone starts in the basement, where the ceiling has to stay openable for the plumbing and ducting above it.

Builder deficiency work is common in Redstone — nail pops, corner cracks and seams that only appeared after possession.

Vapour Barrier Redstone: your questions answered

Does my basement development in Redstone need a vapour barrier?
Almost always, yes — exterior basement walls in our climate need a barrier on the warm side of the insulation before drywall. We confirm what your specific assembly needs on the site visit rather than guessing from the plan.
Which side of the insulation does the poly go on in a Redstone home?
The warm side — the side facing into the heated room. It is the detail that gets reversed most often, and it is not correctable once the wall is boarded.
Do you seal the outlet boxes and vents in Redstone?
Yes — every outlet, switch box, vent and pipe penetration gets sealed individually. Poly hung over open boxes looks finished and does not work.
Do I still need a vapour barrier in Redstone if I have spray foam?
Sometimes not — some spray foam assemblies act as their own barrier, and adding poly over them can be the wrong call. It depends on the product and the thickness, so we confirm on site instead of assuming.
Can you do the vapour barrier and the drywall together in Redstone?
Yes — insulation, vapour barrier and boarding as one job is the most common way we do it, and it means one crew is responsible for what ends up behind the wall. We also cover Homestead, Moraine, Twinhills and every Calgary quadrant.
Our new Redstone home has nail pops appearing — can you fix them for good?
Yes. We reset or refasten the popped fasteners, patch and texture-match, so they stay put — most new-home nail pops settle out within the first couple of years.
Emplastrum Drywall — Vapour Barrier Redstone | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Redstone Calgary — Taping, Mudding, Ceilings & Painting

We also serve nearby

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Everything else we handle in Redstone

Drywall Tips & Guides — Redstone Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook