Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in SE Calgary, sealed before the board goes on

A vapour barrier is one of the few things in a build that is completely hidden and completely unforgiving — once the drywall is on, a torn sheet or an unsealed outlet box stays that way for the life of the wall. In SE Calgary we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. SE Calgary is including newer lake communities like Mahogany, Auburn Bay and Cranston alongside established areas, so insulation calls here range from basement development in the newer homes to attic and wall upgrades in the older ones nearby. We cover all of SE Calgary, 7 days a week.

Vapour Barrier SE Calgary

Watch vapour barrier installation jobs in SE Calgary on our YouTube channel

What affects the cost of vapour barrier installation in SE Calgary?

Area, penetrations and detailing

Vapour barrier cost in SE Calgary depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most SE Calgary vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit.

Which side the vapour barrier goes on, and why that is not optional

The warm side, always

In SE Calgary the barrier goes on the warm side of the insulation — the side facing into the heated SE Calgary room. That is what stops indoor moisture from travelling into the wall cavity and condensing when it reaches cold framing.

What goes wrong when it is reversed

A barrier installed on the cold side traps moisture inside the assembly instead of keeping it out. It is one of the few mistakes in a SE Calgary wall that cannot be corrected without opening the wall back up, which is exactly why we check every SE Calgary job before anything is covered.

How we install and seal it in SE Calgary

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your SE Calgary home. Poly on the walls with open boxes behind it is not a working vapour barrier, and it is the single most common thing we find on jobs that were started by someone else.

Common vapour barrier situations in SE Calgary

New basement developments

insulation calls here range from basement development in the newer homes to attic and wall upgrades in the older ones nearby, so basement development is where most vapour barrier work comes up here — exterior walls and rim joist detailed before the drywall stage. See our basement drywall work if the boarding is part of the same job.

Renovations and open walls

When a wall in a SE Calgary home is already open, it is the only practical moment to add or repair a barrier.

Repairing a damaged barrier

We also repair poly that has been torn by other trades after it went up — a common find once electrical and plumbing have been through.

Why SE Calgary homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in SE Calgary.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover all of SE Calgary, 7 days a week. Free on-site quotes and a fixed price before any work starts.

Simple, clean, on schedule — Vapour Barrier Installation in SE Calgary

1

Free quote

Someone attends the SE Calgary address, inspects what the vapour barrier installation actually involves, and gives you a firm number before leaving. Nothing is estimated from a photo.

2

Book a day

Scheduling is settled in one conversation. The vapour barrier installation start date in SE Calgary is confirmed and the team turns up on it.

3

The work

We work clean. The SE Calgary property is masked off before the vapour barrier installation starts and put back the way we found it, finished to a paint-ready standard.

4

Walk it with you

The vapour barrier installation is not done when the tools are packed — it is done when you have walked it in SE Calgary and told us it is right.

Rated by Calgary Homeowners

Emplastrum Drywall does vapour barrier installation in SE Calgary — patches, restoration and paint-ready finishing. The reviews come from Calgary homeowners on Google, not from us.

Worth reading before you book. And once the vapour barrier installation work in SE Calgary is finished, we would appreciate yours.

Read our reviews on Google

Vapour Barrier SE Calgary: your questions answered

Does my basement development in SE Calgary need a vapour barrier?
Almost always, yes — exterior basement walls in our climate need a barrier on the warm side of the insulation before drywall. We confirm what your specific assembly needs on the site visit rather than guessing from the plan.
Which side of the insulation does the poly go on in a SE Calgary home?
The warm side — the side facing into the heated room. It is the detail that gets reversed most often, and it is not correctable once the wall is boarded.
Do you seal the outlet boxes and vents in SE Calgary?
Yes — every outlet, switch box, vent and pipe penetration gets sealed individually. Poly hung over open boxes looks finished and does not work.
Do I still need a vapour barrier in SE Calgary if I have spray foam?
Sometimes not — some spray foam assemblies act as their own barrier, and adding poly over them can be the wrong call. It depends on the product and the thickness, so we confirm on site instead of assuming.
Can you do the vapour barrier and the drywall together in SE Calgary?
Yes — insulation, vapour barrier and boarding as one job is the most common way we do it, and it means one crew is responsible for what ends up behind the wall. We also cover Auburn Bay, Mahogany, Deer Ridge and every Calgary quadrant.
Emplastrum Drywall — Vapour Barrier SE Calgary | Taping, Mudding, Ceilings & Painting

Other Drywall Services in SE Calgary — Taping, Mudding, Ceilings & Painting

We also serve nearby

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Drywall Tips & Guides — SE Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook