Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Albert Park/Radisson Heights, sealed before the board goes on

Nothing else in a Albert Park Radisson Heights build is this hidden and this unforgiving: after the drywall goes up, a tear in the sheet or an unsealed box is there permanently. In Albert Park/Radisson Heights we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Albert Park/Radisson Heights is an older SE Calgary community where settling cracks, aging texture and the occasional plaster repair come up, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Albert Park/Radisson Heights, Rangeview, Ricardo Ranch, Belvedere and every Calgary quadrant, 7 days a week.

What affects the cost of vapour barrier installation in Albert Park/Radisson Heights in Calgary?

Area, penetrations and detailing

Vapour barrier cost in Albert Park/Radisson Heights depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Albert Park/Radisson Heights vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. Albert Park/Radisson Heights has infill builds next door to original houses, so two homes on one street can need completely different work.

The side a vapour barrier belongs on in Albert Park Radisson Heights -- and why there is no choice about it

The warm side, always

In Albert Park/Radisson Heights the barrier goes on the warm side of the insulation — the side facing into the heated Albert Park/Radisson Heights room. It is what keeps household moisture out of the Albert Park Radisson Heights wall cavity, where it would condense on cold framing.

What goes wrong when it is reversed

Put the barrier on the cold side and it seals moisture into the assembly rather than out of it. It is one of the few mistakes in a Albert Park/Radisson Heights wall that cannot be corrected without opening the wall back up, which is exactly why we check every Albert Park/Radisson Heights job before anything is covered. Some Albert Park/Radisson Heights homes are plaster rather than drywall behind the paint, which changes the repair entirely.

How we install and seal it in Albert Park/Radisson Heights

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Albert Park/Radisson Heights home. A Albert Park Radisson Heights wall with poly up and boxes still open behind it has no working vapour barrier -- and it is the most frequent thing we find on jobs someone else began. Albert Park/Radisson Heights has infill builds next door to original houses, so two homes on one street can need completely different work.

Common vapour barrier situations in Albert Park/Radisson Heights

In Albert Park/Radisson Heights, albert Park Radisson Heights is one of the area's older, character neighbourhoods, so the work here runs to genuine plaster repair, taking down dated textured ceilings, and patching into original lath-and-plaster surfaces so a repair disappears. Where owners are renovating or building infills, we also handle full new-construction boarding and finishing. We handle all of it the same careful way — on-site quote, fixed price, done right.

Why Albert Park/Radisson Heights homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Albert Park/Radisson Heights.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Albert Park/Radisson Heights and every Calgary quadrant, 7 days a week. Quotes at your Albert Park Radisson Heights property are free, with a fixed price before work begins. Infill construction in Albert Park/Radisson Heights means new-build finishing and old-house repair often run on the same block.

Simple, clean, on schedule — Vapour Barrier Installation in Albert Park Radisson Heights Calgary

1

Free quote

The quote happens at your Albert Park Radisson Heights Calgary home, in front of the work. We measure, we look at what is behind the wall where it matters, and the price we give is the price.

2

Book a day

You choose the date. Once the Albert Park Radisson Heights Calgary job is in the calendar the crew arrives that morning with everything the vapour barrier installation needs.

3

The work

We work clean. The Albert Park Radisson Heights Calgary property is masked off before the vapour barrier installation starts and put back the way we found it, finished to a paint-ready standard.

4

Walk it with you

The vapour barrier installation is not done when the tools are packed — it is done when you have walked it in Albert Park Radisson Heights Calgary and told us it is right.

Rated by Calgary Homeowners

★ ★ ★ ★ ★

For vapour barrier installation in Albert Park Radisson Heights Calgary, Emplastrum Drywall handles the repair, the restoration and the finish. What Calgary homeowners think of that work is on our Google profile.

Have a look through them before you decide — and leave one yourself once your Albert Park Radisson Heights Calgary job is done.

Read our reviews on Google

Albert Park/Radisson Heights: what shapes the job

In Albert Park/Radisson Heights we see original finishes and recent renovations on the same block, so the vapour barrier installation is scoped per house, not per postcode.

Albert Park/Radisson Heights has infill builds next to original houses, so two homes a few doors apart can need completely different work.

Some Albert Park/Radisson Heights homes are plaster rather than drywall behind the paint, which changes the repair entirely — different backing, different bonding, different failure mode.

Vapour Barrier Albert Park/Radisson Heights: your questions answered

Does my basement development in Albert Park/Radisson Heights need a vapour barrier?
Yes in nearly every case. In this climate a Albert Park Radisson Heights basement exterior wall needs a barrier on the warm side of the insulation before boarding. What your particular Albert Park Radisson Heights assembly requires is established at the visit, not inferred from a drawing.
Which side of the insulation does the poly go on in a Albert Park/Radisson Heights home?
On the warm side, meaning the face turned toward the heated space in your Albert Park Radisson Heights home. Of all the details on a Albert Park Radisson Heights job this is the one most often got backwards, and boarding makes it permanent.
Do you seal the outlet boxes and vents in Albert Park/Radisson Heights?
Yes. In a Albert Park Radisson Heights home each outlet, switch box, vent and pipe penetration is sealed on its own. In a Albert Park Radisson Heights home, poly draped over open boxes has the appearance of a finished job and none of the function.
Do I still need a vapour barrier in Albert Park/Radisson Heights if I have spray foam?
Not always. Certain spray foam assemblies are their own barrier, and putting poly over one in a Albert Park Radisson Heights home can be a mistake. Product and thickness decide it, which is why we check at the Albert Park Radisson Heights property rather than assume.
Can you do the vapour barrier and the drywall together in Albert Park/Radisson Heights?
Yes. On most Albert Park Radisson Heights jobs we do insulation, barrier and boarding together, so a single crew answers for what is behind the wall. We also cover Rangeview, Ricardo Ranch, Belvedere and every Calgary quadrant.
Emplastrum Drywall — Vapour Barrier Albert Park/Radisson Heights | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Albert Park Radisson Heights Calgary — Taping, Mudding, Ceilings & Painting

We cover Albert Park Radisson Heights Calgary as part of our wider Vapour Barrier Installation Calgary service, across SE Calgary — see every neighbourhood we work in, or talk to your drywall contractor in Calgary.

We also serve nearby

Other services in Calgary

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Poly-B repair, drywall & painting in Albert Park Radisson Heights Calgary

Poly first, then board — see Basement Drywall Albert Park Radisson Heights Calgary.

Insulation not in yet? Start at Insulation Installation Albert Park Radisson Heights Calgary.

Everything else we handle in Albert Park/Radisson Heights

Drywall Tips & Guides — Albert Park Radisson Heights Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook