Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Sierra Springs, sealed before the board goes on

A vapour barrier is one of the few things in a build that is completely hidden and completely unforgiving — once the drywall is on, a torn sheet or an unsealed outlet box stays that way for the life of the wall. In Sierra Springs we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Sierra Springs is an Airdrie community with a mix of older homes and newer builds, so insulation calls here range from basement development in the newer homes to attic and wall upgrades in the older ones nearby. We cover Sierra Springs and all of Airdrie, 7 days a week.

Vapour Barrier Sierra Springs

Watch vapour barrier installation jobs in Sierra Springs Airdrie on our YouTube channel

What affects the cost of vapour barrier installation in Sierra Springs?

Area, penetrations and detailing

Vapour barrier cost in Sierra Springs depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Sierra Springs vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit.

Which side the vapour barrier goes on, and why that is not optional

The warm side, always

In Sierra Springs the barrier goes on the warm side of the insulation — the side facing into the heated Sierra Springs room. That is what stops indoor moisture from travelling into the wall cavity and condensing when it reaches cold framing.

What goes wrong when it is reversed

A barrier installed on the cold side traps moisture inside the assembly instead of keeping it out. It is one of the few mistakes in a Sierra Springs wall that cannot be corrected without opening the wall back up, which is exactly why we check every Sierra Springs job before anything is covered. Basement development is common in Sierra Springs, and a basement behaves differently from the rest of the house — cooler, damper, and less forgiving of a rushed finish.

How we install and seal it in Sierra Springs

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Sierra Springs home. Poly on the walls with open boxes behind it is not a working vapour barrier, and it is the single most common thing we find on jobs that were started by someone else. Basement development is common in Sierra Springs, and a basement behaves differently from the rest of the house — cooler, damper, and less forgiving of a rushed finish.

Common vapour barrier situations in Sierra Springs

Sierra Springs homes bring us a mix of basement development in the newer walkout lots and the standard repair work -- cracks, nail pops and texture matching -- that comes with any Airdrie community settling in over its first several years. Free on-site quote, one fixed price, and work that holds up after.

Why Sierra Springs homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Sierra Springs.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Sierra Springs and all of Airdrie, 7 days a week. Free on-site quotes and a fixed price before any work starts.

Simple, clean, on schedule — Vapour Barrier Installation in Sierra Springs Airdrie

1

Free quote

Someone attends the Sierra Springs Airdrie address, inspects what the vapour barrier installation actually involves, and gives you a firm number before leaving. Nothing is estimated from a photo.

2

Book a day

We book around you, not around our week. When the day comes the Sierra Springs Airdrie crew is there at the agreed time, loaded for the vapour barrier installation.

3

The work

Dust control is set up first — sheeting, sealed openings, containment — then the vapour barrier installation is taken through to a paint-ready finish in your Sierra Springs Airdrie home.

4

Walk it with you

The last step is you inspecting the vapour barrier installation yourself. Anything you point out at the Sierra Springs Airdrie property gets handled before the crew leaves.

Rated by Airdrie Homeowners

For vapour barrier installation in Sierra Springs Airdrie, Emplastrum Drywall handles the repair, the restoration and the finish. What Airdrie homeowners think of that work is on our Google profile.

Go through them, then judge us on your own Sierra Springs Airdrie project.

Read our reviews on Google

Sierra Springs: what shapes the job

Much of Sierra Springs is young enough that original finishes are intact, so the vapour barrier installation is about blending into what the builder left rather than stripping back layers.

Basements in Sierra Springs run cooler and damper than the rest of the house, and that affects both the board choice and how long each coat needs.

Vapour Barrier Sierra Springs: your questions answered

Does my basement development in Sierra Springs need a vapour barrier?
Almost always, yes — exterior basement walls in our climate need a barrier on the warm side of the insulation before drywall. We confirm what your specific assembly needs on the site visit rather than guessing from the plan.
Which side of the insulation does the poly go on in a Sierra Springs home?
The warm side — the side facing into the heated room. It is the detail that gets reversed most often, and it is not correctable once the wall is boarded.
Do you seal the outlet boxes and vents in Sierra Springs?
Yes — every outlet, switch box, vent and pipe penetration gets sealed individually. Poly hung over open boxes looks finished and does not work.
Do I still need a vapour barrier in Sierra Springs if I have spray foam?
Sometimes not — some spray foam assemblies act as their own barrier, and adding poly over them can be the wrong call. It depends on the product and the thickness, so we confirm on site instead of assuming.
Can you do the vapour barrier and the drywall together in Sierra Springs?
Yes — insulation, vapour barrier and boarding as one job is the most common way we do it, and it means one crew is responsible for what ends up behind the wall. We also cover Bayside, Kings Heights, Coopers Crossing and the Airdrie area.
Our Sierra Springs basement walkout has a damp patch on the drywall -- is that something you handle?
We repair water-damaged drywall and identify whether the section needs simple drying and patching or a fuller cut-out and re-board -- if there's an ongoing moisture source we'll flag it before we close the wall back up.
Emplastrum Drywall — Vapour Barrier Sierra Springs | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Sierra Springs Airdrie — Taping, Mudding, Ceilings & Painting

We also serve nearby

Need Airdrie’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Airdrie →

Everything else we handle in Sierra Springs

Drywall Tips & Guides — Sierra Springs Airdrie

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook