Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in West Pointe, sealed before the board goes on

Nothing else in a West Pointe build is this hidden and this unforgiving: after the drywall goes up, a tear in the sheet or an unsealed box is there permanently. In West Pointe we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. West Pointe is a growing Cochrane community where settling cracks and finishing work are common, so basement development insulation is the main call here, with the main floors already insulated to a recent code. We cover West Pointe and all of Cochrane, 7 days a week.

What affects the cost of vapour barrier installation in West Pointe?

Area, penetrations and detailing

Vapour barrier cost in West Pointe depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most West Pointe vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit.

The side a vapour barrier belongs on in West Pointe -- and why there is no choice about it

The warm side, always

In West Pointe the barrier goes on the warm side of the insulation — the side facing into the heated West Pointe room. It is what keeps household moisture out of the West Pointe wall cavity, where it would condense on cold framing.

What goes wrong when it is reversed

Put the barrier on the cold side and it seals moisture into the assembly rather than out of it. It is one of the few mistakes in a West Pointe wall that cannot be corrected without opening the wall back up, which is exactly why we check every West Pointe job before anything is covered. West Pointe spans a range of build eras, so what is behind the wall differs street to street.

How we install and seal it in West Pointe

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your West Pointe home. A West Pointe wall with poly up and boxes still open behind it has no working vapour barrier -- and it is the most frequent thing we find on jobs someone else began. Housing in West Pointe is mixed, which is why we look before we quote rather than after.

Common vapour barrier situations in West Pointe

In West Pointe, serving West Pointe seven days a week, we take on drywall jobs big and small. We handle renovation and new-construction drywall, boarding and finishing on schedule. We smooth builder-grade and patched walls up to a flawless Level 5 finish before repainting. Fast, clean and paint-ready, most repairs in a single visit. That is the standard on every job here, big or small — on-site quote, fixed price.

Why West Pointe homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in West Pointe.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover West Pointe and all of Cochrane, 7 days a week. Quotes at your West Pointe property are free, with a fixed price before work begins.

Simple, clean, on schedule — Vapour Barrier Installation in West Pointe Cochrane

1

Free quote

A fixed price for the vapour barrier installation comes from seeing it in person at your West Pointe Cochrane home — scope confirmed on site, then a number that does not change.

2

Book a day

You choose the date. Once the West Pointe Cochrane job is in the calendar the crew arrives that morning with everything the vapour barrier installation needs.

3

The work

Floors get covered and doorways sealed before the vapour barrier installation begins. Your West Pointe Cochrane home stays liveable while we work, and the site is tidied each day.

4

Walk it with you

You sign off, not us. We go through the completed vapour barrier installation with you at the West Pointe Cochrane home and fix anything that is not right that day.

Rated by Cochrane Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the vapour barrier installation contractor West Pointe Cochrane trusts for repair, restoration and finishing — rated on Google by Cochrane homeowners.

Have a look through them before you decide — and leave one yourself once your West Pointe Cochrane job is done.

Read our reviews on Google

Vapour Barrier West Pointe: your questions answered

Does my basement development in West Pointe need a vapour barrier?
Yes in nearly every case. In this climate a West Pointe basement exterior wall needs a barrier on the warm side of the insulation before boarding. What your particular West Pointe assembly requires is established at the visit, not inferred from a drawing.
Which side of the insulation does the poly go on in a West Pointe home?
On the warm side, meaning the face turned toward the heated space in your West Pointe home. Of all the details on a West Pointe job this is the one most often got backwards, and boarding makes it permanent.
Do you seal the outlet boxes and vents in West Pointe?
Yes. In a West Pointe home each outlet, switch box, vent and pipe penetration is sealed on its own. In a West Pointe home, poly draped over open boxes has the appearance of a finished job and none of the function.
Do I still need a vapour barrier in West Pointe if I have spray foam?
Not always. Certain spray foam assemblies are their own barrier, and putting poly over one in a West Pointe home can be a mistake. Product and thickness decide it, which is why we check at the West Pointe property rather than assume.
Can you do the vapour barrier and the drywall together in West Pointe?
Yes. On most West Pointe jobs we do insulation, barrier and boarding together, so a single crew answers for what is behind the wall. We also cover Cochrane, Sunset Ridge, Heritage Hills and the Cochrane area.
Emplastrum Drywall — Vapour Barrier West Pointe | Taping, Mudding, Ceilings & Painting

Other Drywall Services in West Pointe Cochrane — Taping, Mudding, Ceilings & Painting

We cover West Pointe Cochrane as part of our wider Vapour Barrier Installation Cochrane service, across Cochrane — see every neighbourhood we work in, or talk to your drywall contractor in Cochrane.

We also serve nearby

Other services in Cochrane

Need Cochrane’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Cochrane →

Poly-B repair, drywall & painting in West Pointe Cochrane

Poly first, then board — see Basement Drywall West Pointe Cochrane.

Insulation not in yet? Start at Insulation Installation West Pointe Cochrane.

Everything else we handle in West Pointe

Drywall Tips & Guides — West Pointe Cochrane

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook