Free on-site drywall quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Fire-Rated Drywall Calgary, Type X board taped to inspection

Fire-Rated Drywall Calgary work is measured in hours, not in coats. A one hour assembly and a two hour assembly use different board, different layering and different joint treatment, and an inspector checks the assembly rather than the finish. We hang Type X board, build one and two hour assemblies to the drawing, handle garage and party wall separation, and tape it to inspection so the rating is real rather than assumed. Getting a fire separation wrong is the kind of mistake that fails an occupancy inspection and costs a week. We do this work across every quadrant of Calgary and out to Airdrie, Cochrane, Chestermere and Okotoks.

  • Type X board hung to the assembly on the drawing
  • One and two hour assemblies, single or double layer as specified
  • Garage and party wall separation, including the ceiling under living space
  • Fire-Rated Drywall Calgary joints taped to inspection, not just filled
  • Firestopping around penetrations left ready for the inspector to see
  • Legal suite and shared-wall assemblies built to the same standard
  • We tell you when a drawing and the code do not agree

What makes a wall fire-rated?

The assembly, not the board alone

A rating is a tested combination: board type, thickness, how many layers, the fastener pattern, the framing behind it and how the joints are treated. Type X board on its own is not a rated wall.

Why that matters on site

Swapping one element breaks the tested assembly even when it looks stronger. We build what the drawing specifies rather than what seems equivalent, because the inspector is checking against a tested assembly and not against an opinion.

What is the difference between one and two hour assemblies?

Layers and joint treatment

A one hour assembly is usually a single layer of Type X each side with taped joints. A two hour assembly generally means two layers, with the second layer's joints offset from the first so no joint runs straight through.

Where each one is used

One hour is the common house-to-garage separation. Two hour turns up on party walls between units and in some suite assemblies. The drawing names it, and when it does not, the code does.

Is the garage wall fire-rated in a Calgary house?

Garage and party wall separation is the most common case

The wall between a garage and living space, and the garage ceiling where there is living space above it, both need a separation. That is most attached garages in the city.

Done with the rest of the garage

We usually board a rated garage wall as part of the garage drywall job, because the rated and unrated parts of the same garage should be hung by the same crew on the same day.

Does Fire-Rated Drywall Calgary work need the joints taped?

Taped to inspection, always

An untaped joint in a rated assembly is a hole in the rating. Joints get taped and coated to the level the assembly requires, which is not the same thing as a cosmetic finish, though it usually ends up looking like one.

What an inspector looks at

The joints, the fastener pattern, the layering at corners, and whether penetrations have been firestopped. We leave those visible rather than covering them before the inspection.

Do legal suites need Fire-Rated Drywall Calgary?

Yes, and usually sound separation too

A legal suite drywall assembly carries a fire separation between the suite and the rest of the house, and the ceiling assembly is the part people underestimate.

Fire and sound are different requirements

A rated wall is not automatically a quiet wall. Where the suite also needs to be quiet, soundproofing is built into the same assembly rather than added afterwards, which is cheaper and works better.

What does Fire-Rated Drywall Calgary work cost?

Area, layers and access

Type X board costs more than regular and a two hour assembly doubles the board and the taping. Garage ceilings and stairwells add staging time. Those are the three things that move a rated quote.

Priced from the drawing

We quote from the specified assembly rather than from a square-foot rate, because a one hour and a two hour wall of the same size are different jobs.

Where we do Fire-Rated Drywall Calgary work

Every quadrant, and the towns around the city

Northwest through Tuscany, Nolan Hill and Sage Hill. Northeast across Cornerstone, Skyview Ranch and Marlborough. Southeast down to Seton, Mahogany and McKenzie Towne. Southwest through Legacy, Evergreen and Braeside.

New builds, garages and suites

Most rated work is a garage separation, a legal suite or a party wall in a multi-unit build. We also do it in Airdrie, Chestermere, Cochrane and Okotoks.

How does a Fire-Rated Drywall job in Calgary actually run?

1

What does the free quote cover?

A fixed price for fire-rated drywall comes from seeing it in person at your Calgary home: scope confirmed on site, then a number that does not change.

2

How soon can you book a day?

You choose the date. Once the Calgary job is in the calendar the crew arrives that morning with everything fire-rated drywall needs.

3

What happens on the day?

We keep the dust under control and protect your Calgary home while we finish fire-rated drywall to a clean, paint-ready standard.

4

Do you walk the job with me before you go?

Before we call fire-rated drywall finished we walk it together under proper light. If a spot needs another pass, it gets one.

What do homeowners say about our work in Calgary, AB?

4.9 from 61 Google reviews

Emplastrum Drywall does fire-rated drywall in Calgary: patches, restoration and paint-ready finishing. The reviews come from Calgary homeowners on Google, not from us.

Read what other people said, then tell us how we did on your own fire-rated drywall job in Calgary.

Read our reviews on Google

Fire-Rated Drywall Calgary: your questions answered

Is Type X the same as fire-rated drywall?
Type X is the board. A rating comes from the whole tested assembly: board, layers, fasteners, framing and joint treatment. Type X alone is not a rated wall.
Does my attached garage need Fire-Rated Drywall Calgary?
Almost always, both the wall to living space and the ceiling where there is living space above. The drawing names the assembly, and when it does not, the code does.
How long does a two hour assembly take?
Longer than one hour, because it is usually double-layered with offset joints, so there is twice the board and twice the taping. We give you the day count from the drawing.
Do the joints have to be taped on a rated wall?
Yes. An untaped joint is a hole in the rating. Joints are taped and coated to the level the assembly requires, which is why we say taped to inspection.
Do you cover all of Calgary for Fire-Rated Drywall Calgary work?
Yes. All four quadrants plus Airdrie, Chestermere, Cochrane and Okotoks, 7 days a week. The only jobs we skip are downtown high-rise towers, where building access rules out our workflow.
Emplastrum Drywall — Fire-Rated Drywall Calgary | Taping, Mudding, Ceilings & Painting

Do we also tape, mud, finish ceilings and paint in Calgary?

Which areas do we serve?

What other work do we take on in Calgary, AB?

Need a Calgary drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations, start to finish.

Your Drywall Contractor in Calgary →

Drywall Tips & Guides: Calgary, AB

Get Your Free Drywall Quote
Tell us about your drywall project. We’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote