Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Seton, sealed before the board goes on

A vapour barrier is one of the few things in a build that is completely hidden and completely unforgiving — once the drywall is on, a torn sheet or an unsealed outlet box stays that way for the life of the wall. In Seton we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Seton is one of SE Calgary's newer communities, where fresh installation and first-year settling work are common, so insulation calls here are usually limited to basement development, since the main floors are already insulated to current code. We cover Seton, Rangeview, Ricardo Ranch, Belvedere and every Calgary quadrant, 7 days a week.

Vapour Barrier Seton

Watch vapour barrier installation jobs in Seton Calgary on our YouTube channel

What affects the cost of vapour barrier installation in Seton?

Area, penetrations and detailing

Vapour barrier cost in Seton depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Seton vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. Ceilings in Seton are typically knockdown, and matching that pattern is the part of a repair people notice.

Which side the vapour barrier goes on, and why that is not optional

The warm side, always

In Seton the barrier goes on the warm side of the insulation — the side facing into the heated Seton room. That is what stops indoor moisture from travelling into the wall cavity and condensing when it reaches cold framing.

What goes wrong when it is reversed

A barrier installed on the cold side traps moisture inside the assembly instead of keeping it out. It is one of the few mistakes in a Seton wall that cannot be corrected without opening the wall back up, which is exactly why we check every Seton job before anything is covered. Most of Seton went up recently enough that we are usually working against a builder's original finish rather than someone else's repair.

How we install and seal it in Seton

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Seton home. Poly on the walls with open boxes behind it is not a working vapour barrier, and it is the single most common thing we find on jobs that were started by someone else.

Common vapour barrier situations in Seton

In Seton, seton was established in 2018. Homes there are current-build, so ceilings are typically knockdown and the work is new-build boarding and taping, basement development, and the first-season movement that shows up as a house dries out. Free on-site quote, one fixed price, and work that holds up after.

Why Seton homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Seton.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Seton and every Calgary quadrant, 7 days a week. Free on-site quotes and a fixed price before any work starts. New homes in Seton tend to have long unbroken wall runs and high ceilings, which changes how a seam has to be feathered.

Simple, clean, on schedule — Vapour Barrier Installation in Seton Calgary

1

Free quote

A fixed price for the vapour barrier installation comes from seeing it in person at your Seton Calgary home — scope confirmed on site, then a number that does not change.

2

Book a day

One date, agreed and kept. The vapour barrier installation in Seton Calgary starts when we said it would, with the right materials already on the truck.

3

The work

We keep the dust under control and protect your Seton Calgary home while we finish the vapour barrier installation to a clean, paint-ready standard.

4

Walk it with you

We don't pack up till you've walked the finished vapour barrier installation with us and you're happy with the result in Seton Calgary.

Rated by Calgary Homeowners

Emplastrum Drywall is the vapour barrier installation contractor Seton Calgary trusts for repair, restoration and finishing — rated on Google by Calgary homeowners.

Worth reading before you book. And once the vapour barrier installation work in Seton Calgary is finished, we would appreciate yours.

Read our reviews on Google

What we tend to find in Seton

In a newly built Seton home the drywall has not yet been through a full winter, so we plan the vapour barrier installation around settling that is still happening rather than settling that has finished.

Builder deficiency work is common in Seton — nail pops, corner cracks and seams that only appeared after possession.

A lot of the work in Seton starts in the basement, where the ceiling has to stay openable for the plumbing and ducting above it.

Vapour Barrier Seton: your questions answered

Does my basement development in Seton need a vapour barrier?
Almost always, yes — exterior basement walls in our climate need a barrier on the warm side of the insulation before drywall. We confirm what your specific assembly needs on the site visit rather than guessing from the plan.
Which side of the insulation does the poly go on in a Seton home?
The warm side — the side facing into the heated room. It is the detail that gets reversed most often, and it is not correctable once the wall is boarded.
Do you seal the outlet boxes and vents in Seton?
Yes — every outlet, switch box, vent and pipe penetration gets sealed individually. Poly hung over open boxes looks finished and does not work.
Do I still need a vapour barrier in Seton if I have spray foam?
Sometimes not — some spray foam assemblies act as their own barrier, and adding poly over them can be the wrong call. It depends on the product and the thickness, so we confirm on site instead of assuming.
Can you do the vapour barrier and the drywall together in Seton?
Yes — insulation, vapour barrier and boarding as one job is the most common way we do it, and it means one crew is responsible for what ends up behind the wall. We also cover Rangeview, Ricardo Ranch, Belvedere and every Calgary quadrant.
Emplastrum Drywall — Vapour Barrier Seton | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Seton Calgary — Taping, Mudding, Ceilings & Painting

We also serve nearby

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

What else we can do while we are in Seton

Drywall Tips & Guides — Seton Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook