Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Yorkville, sealed before the board goes on

A vapour barrier is one of the few things in a build that is completely hidden and completely unforgiving — once the drywall is on, a torn sheet or an unsealed outlet box stays that way for the life of the wall. In Yorkville we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Yorkville is one of SW Calgary's newer communities, where fresh installation and first-year settling work are common, so insulation calls here are usually limited to basement development, since the main floors are already insulated to current code. We cover Yorkville, Pine Creek, Alpine Park, Osprey Hill and every Calgary quadrant, 7 days a week.

Vapour Barrier Yorkville

Watch vapour barrier installation jobs in Yorkville Calgary on our YouTube channel

What affects the cost of vapour barrier installation in Yorkville?

Area, penetrations and detailing

Vapour barrier cost in Yorkville depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Yorkville vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. Housing in Yorkville is mixed, which is why we look before we quote rather than after.

Which side the vapour barrier goes on, and why that is not optional

The warm side, always

In Yorkville the barrier goes on the warm side of the insulation — the side facing into the heated Yorkville room. That is what stops indoor moisture from travelling into the wall cavity and condensing when it reaches cold framing.

What goes wrong when it is reversed

A barrier installed on the cold side traps moisture inside the assembly instead of keeping it out. It is one of the few mistakes in a Yorkville wall that cannot be corrected without opening the wall back up, which is exactly why we check every Yorkville job before anything is covered. In Yorkville we see everything from original finishes to recent renovations on the same block.

How we install and seal it in Yorkville

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Yorkville home. Poly on the walls with open boxes behind it is not a working vapour barrier, and it is the single most common thing we find on jobs that were started by someone else.

Common vapour barrier situations in Yorkville

Yorkville owners often want their brand-new builder-grade walls upgraded to Level 5 before their first repaint, especially in rooms with pot lights or big windows where a Level 4 finish can show under raking light. Same trusted team, same process on every job — on-site quote, fixed price, no surprises.

Why Yorkville homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Yorkville.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Yorkville and every Calgary quadrant, 7 days a week. Free on-site quotes and a fixed price before any work starts. Housing in Yorkville is mixed, which is why we look before we quote rather than after.

Simple, clean, on schedule — Vapour Barrier Installation in Yorkville Calgary

1

Free quote

We come out to your Yorkville Calgary property, take a real look at the vapour barrier installation, and hand you a fixed price on the spot — no guessing, no vague ballpark.

2

Book a day

Scheduling is settled in one conversation. The vapour barrier installation start date in Yorkville Calgary is confirmed and the team turns up on it.

3

The work

We keep the dust under control and protect your Yorkville Calgary home while we finish the vapour barrier installation to a clean, paint-ready standard.

4

Walk it with you

The last step is you inspecting the vapour barrier installation yourself. Anything you point out at the Yorkville Calgary property gets handled before the crew leaves.

Rated by Calgary Homeowners

Homeowners in Yorkville Calgary call Emplastrum Drywall for vapour barrier installation work, from a single patch through to a full restoration. Our reviews are on Google, written by Calgary customers.

Go through them, then judge us on your own Yorkville Calgary project.

Read our reviews on Google

Vapour Barrier Yorkville: your questions answered

Does my basement development in Yorkville need a vapour barrier?
Almost always, yes — exterior basement walls in our climate need a barrier on the warm side of the insulation before drywall. We confirm what your specific assembly needs on the site visit rather than guessing from the plan.
Which side of the insulation does the poly go on in a Yorkville home?
The warm side — the side facing into the heated room. It is the detail that gets reversed most often, and it is not correctable once the wall is boarded.
Do you seal the outlet boxes and vents in Yorkville?
Yes — every outlet, switch box, vent and pipe penetration gets sealed individually. Poly hung over open boxes looks finished and does not work.
Do I still need a vapour barrier in Yorkville if I have spray foam?
Sometimes not — some spray foam assemblies act as their own barrier, and adding poly over them can be the wrong call. It depends on the product and the thickness, so we confirm on site instead of assuming.
Can you do the vapour barrier and the drywall together in Yorkville?
Yes — insulation, vapour barrier and boarding as one job is the most common way we do it, and it means one crew is responsible for what ends up behind the wall. We also cover Pine Creek, Alpine Park, Osprey Hill and every Calgary quadrant.
Is it normal for nail pops to show up in our new Yorkville home already?
Yes — as new framing and drywall finish drying out, fasteners can work slightly loose. It's a quick patch and texture-match, and it's far less likely to happen again once the home is fully settled.
Emplastrum Drywall — Vapour Barrier Yorkville | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Yorkville Calgary — Taping, Mudding, Ceilings & Painting

We also serve nearby

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Other jobs we take on in Yorkville

Drywall Tips & Guides — Yorkville Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook