Call (403) 829-8702 Free Quote
Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Bel-Aire, sealed before the board goes on

Nothing else in a Bel Aire build is this hidden and this unforgiving: after the drywall goes up, a tear in the sheet or an unsealed box is there permanently. In Bel-Aire we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Bel-Aire is an older SW Calgary community where settling cracks, aging texture and the occasional plaster repair come up, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Bel-Aire, Pine Creek, Alpine Park, Osprey Hill and every Calgary quadrant, 7 days a week.

What affects the cost of vapour barrier installation in Bel-Aire in Calgary?

Area, penetrations and detailing

Vapour barrier cost in Bel-Aire depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Bel-Aire vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit.

The side a vapour barrier belongs on in Bel Aire -- and why there is no choice about it

The warm side, always

In Bel-Aire the barrier goes on the warm side of the insulation — the side facing into the heated Bel-Aire room. It is what keeps household moisture out of the Bel Aire wall cavity, where it would condense on cold framing.

What goes wrong when it is reversed

Put the barrier on the cold side and it seals moisture into the assembly rather than out of it. It is one of the few mistakes in a Bel-Aire wall that cannot be corrected without opening the wall back up, which is exactly why we check every Bel-Aire job before anything is covered. Housing in Bel-Aire is mixed, which is why we look before we quote rather than after.

How we install and seal it in Bel-Aire

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Bel-Aire home. A Bel Aire wall with poly up and boxes still open behind it has no working vapour barrier -- and it is the most frequent thing we find on jobs someone else began. In Bel-Aire we see everything from original finishes to recent renovations on the same block.

Common vapour barrier situations in Bel-Aire

In Bel-Aire, decades of Calgary freeze-thaw cycles show up in Bel Aire as recurring hairline cracks at door and window corners — we repair them properly (not just a smear of filler) so they are far less likely to reopen the following winter. Assessed on site, priced up front, and finished properly — every time.

Why Bel-Aire homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Bel-Aire.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Bel-Aire and every Calgary quadrant, 7 days a week. Quotes at your Bel Aire property are free, with a fixed price before work begins.

Simple, clean, on schedule — Vapour Barrier Installation in Bel Aire Calgary

1

Free quote

Someone attends the Bel Aire Calgary address, inspects what the vapour barrier installation actually involves, and gives you a firm number before leaving. Nothing is estimated from a photo.

2

Book a day

Scheduling is settled in one conversation. The vapour barrier installation start date in Bel Aire Calgary is confirmed and the team turns up on it.

3

The work

The vapour barrier installation is done in a protected work area. Furniture and floors in the Bel Aire Calgary home are covered, and nothing is left for you to clean up at the end of the day.

4

Walk it with you

The vapour barrier installation is not done when the tools are packed — it is done when you have walked it in Bel Aire Calgary and told us it is right.

Rated by Calgary Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall does vapour barrier installation in Bel Aire Calgary — patches, restoration and paint-ready finishing. The reviews come from Calgary homeowners on Google, not from us.

Have a look through them before you decide — and leave one yourself once your Bel Aire Calgary job is done.

Read our reviews on Google

Vapour Barrier Bel-Aire: your questions answered

Does my basement development in Bel-Aire need a vapour barrier?
Yes in nearly every case. In this climate a Bel Aire basement exterior wall needs a barrier on the warm side of the insulation before boarding. What your particular Bel Aire assembly requires is established at the visit, not inferred from a drawing.
Which side of the insulation does the poly go on in a Bel-Aire home?
On the warm side, meaning the face turned toward the heated space in your Bel Aire home. Of all the details on a Bel Aire job this is the one most often got backwards, and boarding makes it permanent.
Do you seal the outlet boxes and vents in Bel-Aire?
Yes. In a Bel Aire home each outlet, switch box, vent and pipe penetration is sealed on its own. In a Bel Aire home, poly draped over open boxes has the appearance of a finished job and none of the function.
Do I still need a vapour barrier in Bel-Aire if I have spray foam?
Not always. Certain spray foam assemblies are their own barrier, and putting poly over one in a Bel Aire home can be a mistake. Product and thickness decide it, which is why we check at the Bel Aire property rather than assume.
Can you do the vapour barrier and the drywall together in Bel-Aire?
Yes. On most Bel Aire jobs we do insulation, barrier and boarding together, so a single crew answers for what is behind the wall. We also cover Pine Creek, Alpine Park, Osprey Hill and every Calgary quadrant.
Emplastrum Drywall — Vapour Barrier Bel-Aire | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Bel Aire Calgary — Taping, Mudding, Ceilings & Painting

We cover Bel Aire Calgary as part of our wider Vapour Barrier Installation Calgary service, across SW Calgary — see every neighbourhood we work in, or talk to your drywall contractor in Calgary.

We also serve nearby

Other services in Calgary

Need Calgary’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Calgary →

Poly-B repair, drywall & painting in Bel Aire Calgary

Poly first, then board — see Basement Drywall Bel Aire Calgary.

Insulation not in yet? Start at Insulation Installation Bel Aire Calgary.

Other drywall services we do in Bel-Aire

Drywall Tips & Guides — Bel Aire Calgary

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook