Free on-site quotes7 days a weekNW Calgary · NE Calgary · SW Calgary · SE CalgaryLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Vapour barrier installation in Sunset Ridge, sealed before the board goes on

A vapour barrier is one of the few things in a build that is completely hidden and completely unforgiving — once the drywall is on, a torn sheet or an unsealed outlet box stays that way for the life of the wall. In Sunset Ridge we install and seal 6 mil poly over the insulation on the warm side, lapped at the seams and sealed at every penetration, before any board goes up. Sunset Ridge is a growing newer Cochrane west-side community where settling cracks and finishing are common, so basement development insulation is the main call here, with the main floors already insulated to a recent code. We cover Sunset Ridge and all of Cochrane, 7 days a week.

Vapour Barrier Sunset Ridge

Watch vapour barrier installation jobs in Sunset Ridge Cochrane on our YouTube channel

What affects the cost of vapour barrier installation in Sunset Ridge?

Area, penetrations and detailing

Vapour barrier cost in Sunset Ridge depends on the wall and ceiling area being covered, the number of penetrations that need sealing — outlets, vents, pipes and light boxes — and how much detail work the rim joist and window returns need. We measure the space and give a fixed price before we start.

Usually priced with the insulation

Most Sunset Ridge vapour barrier work is quoted together with the insulation and the boarding that follows it, because it is the same crew and the same visit. Sunset Ridge spans a range of build eras, so what is behind the wall differs street to street.

Which side the vapour barrier goes on, and why that is not optional

The warm side, always

In Sunset Ridge the barrier goes on the warm side of the insulation — the side facing into the heated Sunset Ridge room. That is what stops indoor moisture from travelling into the wall cavity and condensing when it reaches cold framing.

What goes wrong when it is reversed

A barrier installed on the cold side traps moisture inside the assembly instead of keeping it out. It is one of the few mistakes in a Sunset Ridge wall that cannot be corrected without opening the wall back up, which is exactly why we check every Sunset Ridge job before anything is covered. Sunset Ridge spans a range of build eras, so what is behind the wall differs street to street.

How we install and seal it in Sunset Ridge

Hung, lapped and sealed

We run the poly in the largest sheets the space allows to keep seams to a minimum, lap every seam over a stud or joist rather than in open cavity, and seal it — a stapled overlap on its own is not a seal.

The penetrations are the job

Outlet and switch boxes, bath fans, dryer vents, plumbing stacks and pot lights each get sealed individually in your Sunset Ridge home. Poly on the walls with open boxes behind it is not a working vapour barrier, and it is the single most common thing we find on jobs that were started by someone else. Housing in Sunset Ridge is mixed, which is why we look before we quote rather than after.

Common vapour barrier situations in Sunset Ridge

In Sunset Ridge, sunset Ridge is a residential neighbourhood in Cochrane. Build years vary across the neighbourhood, so rather than assume what is behind the wall we confirm it on site — the finish, the texture and how the existing surface has aged all change how the repair is approached. Same trusted team, same process on every job — on-site quote, fixed price, no surprises.

Why Sunset Ridge homeowners have us do the vapour barrier

We are the ones boarding over it

As a drywall company we install the barrier the way we want to board over it, because we are the trade that has to live with what is behind the sheet in Sunset Ridge.

Left ready to be looked at

We leave the barrier complete and visible so it can be inspected before the drywall goes on — nothing gets covered until it has been seen.

Fixed price, same-day reply

We cover Sunset Ridge and all of Cochrane, 7 days a week. Free on-site quotes and a fixed price before any work starts. In Sunset Ridge we see everything from original finishes to recent renovations on the same block.

Simple, clean, on schedule — Vapour Barrier Installation in Sunset Ridge Cochrane

1

Free quote

We come out to your Sunset Ridge Cochrane property, take a real look at the vapour barrier installation, and hand you a fixed price on the spot — no guessing, no vague ballpark.

2

Book a day

One date, agreed and kept. The vapour barrier installation in Sunset Ridge Cochrane starts when we said it would, with the right materials already on the truck.

3

The work

We work clean. The Sunset Ridge Cochrane property is masked off before the vapour barrier installation starts and put back the way we found it, finished to a paint-ready standard.

4

Walk it with you

You sign off, not us. We go through the completed vapour barrier installation with you at the Sunset Ridge Cochrane home and fix anything that is not right that day.

Rated by Cochrane Homeowners

Homeowners in Sunset Ridge Cochrane call Emplastrum Drywall for vapour barrier installation work, from a single patch through to a full restoration. Our reviews are on Google, written by Cochrane customers.

Read the reviews, or leave your own after your vapour barrier installation project in Sunset Ridge Cochrane.

Read our reviews on Google

Vapour Barrier Sunset Ridge: your questions answered

Does my basement development in Sunset Ridge need a vapour barrier?
Almost always, yes — exterior basement walls in our climate need a barrier on the warm side of the insulation before drywall. We confirm what your specific assembly needs on the site visit rather than guessing from the plan.
Which side of the insulation does the poly go on in a Sunset Ridge home?
The warm side — the side facing into the heated room. It is the detail that gets reversed most often, and it is not correctable once the wall is boarded.
Do you seal the outlet boxes and vents in Sunset Ridge?
Yes — every outlet, switch box, vent and pipe penetration gets sealed individually. Poly hung over open boxes looks finished and does not work.
Do I still need a vapour barrier in Sunset Ridge if I have spray foam?
Sometimes not — some spray foam assemblies act as their own barrier, and adding poly over them can be the wrong call. It depends on the product and the thickness, so we confirm on site instead of assuming.
Can you do the vapour barrier and the drywall together in Sunset Ridge?
Yes — insulation, vapour barrier and boarding as one job is the most common way we do it, and it means one crew is responsible for what ends up behind the wall. We also cover Cochrane, Heritage Hills, Riversong and the Cochrane area.
Emplastrum Drywall — Vapour Barrier Sunset Ridge | Taping, Mudding, Ceilings & Painting

Other Drywall Services in Sunset Ridge Cochrane — Taping, Mudding, Ceilings & Painting

We also serve nearby

Need Cochrane’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Cochrane →

Other jobs we take on in Sunset Ridge

Drywall Tips & Guides — Sunset Ridge Cochrane

Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Calgary, Airdrie, Cochrane, Chestermere & Okotoks Follow on Facebook